BVF-61T-P2.0 JST

VL CONNECTOR 6.2mm pitch/Disconnectable Crimp style Wire-to-wire connectors Specifications Current rating: 20A AC, DC max. Voltage rating: 600V AC, DC max.(300V in accordance with the Electrical Appliance and Material Safety Law in Japan) Temperature range: -25C to +90C (including temperature rise in applying electrical current) Contact resistance: Initial value/7m max. After environmental testing/10m max. Insulation resistance: 1,000M min. Withstanding voltage: 2,000V AC/minute Applicable wire: AWG #22 to #12 2 0.3 to 3.5mm The VL connector is a 6.2mm pitch wire-to- Applicable panel thickness: 0.5 to 2.0mm wire connector designed for circuits * Compliant with RoHS. requiring up to 20A (1 or 2-circuit with * Refer toGeneral Instruction and Notice when using AWG #12 wire). Terminals and Connector at the end of this catalog. * Contact JST for details. Housing lances for contact retention Note: The current rating varies depending on the number of circuits and the Secondary retainer wire size used in each connector. The table below lists the current rating as a function of the number of circuits and the wire size. Suited for circuits with high power requirements Current unit: A Panel lock construction Wire size (AWG) Circuits #12 #14 #16 #18 #20 #22 Standards 1 20 15 10 8 6 4 2 20 15 10 8 6 4 0 Recognized E60389 3 19 14 9 8 6 4 4 18 13 9 7 6 4 Certified LR20812 1 6 16 12 8 7 5 3 8 16 11 7 6 5 3 R9351103 2 12 15 10 7 6 4 3 Panel layout and Assembly layout (2, 3 and single-row 4 circuits) (4, 6, 8 and 12 circuits) <Inner-housing lock> <Inner-housing lock> 40.5 40.5 44.1 (including retainer) 44.1 (including retainer) <Outer-housing lock> <Outer-housing lock> 40.5 44.1 (including retainer) 40.5 44.1 (including retainer) Shape I Shape II Panel hole dimensions (mm) General tolerance A, B, D: 0.13 C, E: 0.1 Receptacle housing Panel hole Applicable panel Circuits shape Model No. thickness (mm) AB CD E VLR-02V 1 VLR-03V 1 VLR-04V 2 0.5 2.0 (Single-row) VLR-04VN 1 VLR-06V 2 VLR-08V A 2 A B VLR-12V B 2 Note: 1. Punch holes in the panel according to the figures and table shown above. Burrs must be removed. 2. The strength of the panel must be considered when punching two or more holes. 3. The connector must be inserted from the same side as the hole is punched. 1 E C 0.5 D E C D 14.6 12.2 21.7 19.3 (including retainer) (including retainer) 6 5 4 3 2 1 12 11 10 9 8 7 L JST 4 3 2 1 8 7 6 5 L JST 3 2 1 6 5 4 4 3 2 1 L JST 2 1 JST 43 3 2 1 L JST 2 1 L JST VL CONNECTOR Contact Pin contact 2 mm AWG # 0.31.25 2216 1.73.2 *SVM-42T-P2.0 *SVF-42T-P2.0 1.7+1.7 0.3+0.3 22+22 2.5+2.7 0.5+0.75 20+18 22.2 2,000 1.93.4 0.52.0 2014 1.7 2.0 SVM-61T-P2.0 SVF-61T-P2.0 1.9+1.9 0.5+0.5 20+20 3.6 2.1+2.7 0.75+1.25 18+16 3.5 12 4.1 SVM-81T-P2.0 SVF-81T-P2.0 Socket contact RoHS compliance Note: 1. Contact JST for special products. 2. *Marked products are not TUV approved. Applicator Crimping Contact machine Crimp applicator Dies Crimp applicator with dies 16.7 SVM-42T-P2.0 2.0 1.7 SVF-42T-P2.0 3.6 SVM-61T-P2.0 SVF-61T-P2.0 SVM-81T-P2.0 SVF-81T-P2.0 Contact position location numbers Contact position numbers are stamped Retainer Retainer Receptacle housing Plug housing Receptacle housing 12 6 4 11 5 3 6 3 8 4 2 4 2 3 10 4 1 7 3 2 5 2 1 3 1 2 93 1 6 2 L JST 4 1 1 82 L JST 51 L JST 71 Plug housing <Inner-housing lock> <Outer-housing lock> 3 4 2 2 4 3 1 2 2 2 4 3 1 1 3 2 1 L JST 1 1 3 2 1 1 6 12 6 12 5 11 4 8 4 8 5 11 3 6 3 6 3 7 4 10 3 7 4 10 2 5 2 5 2 6 3 9 2 6 3 9 1 4 1 4 2 8 1 5 1 5 2 8 L JST L JST 1 7 1 7 L JST 2 1 2 3 465 JST 3.1 4.1 1 2 L JST 1 2 34 5 67 8 L JST 1 2 3 L JST 1 23 4 5 6 1 2 2.0 3.2 3.1 78 9 10 11 12 4.1 L JST 3 4