12345 JST Crimp NH CONNECTOR Disconnectable Crimp style connectors 2.5mm pitch Features Superior folded beam construction (1) This sturdy construction withstands repeated stress, resists permanent deformation, and offers a very long service life. (2) High reliability is ensured whether the contact pressure is high or low. (3) This contact design has a large tolerance for variations in mating post thickness and resists deformation when pried. Double-sided contact (1) The receptacle contact has a protected entry which eliminates contact damage caused by mismating. (2) It provides high contact pressure, is free from abnormal stress, and maintains continuity at all times. (3) It has an extremely long service life due to its folded beam design. Wide, sturdy post The post has a large cross-sectional area to resist prying during insertion into printed circuit boards and mating with This 2.5mm pitch connector is used to connector housings. connect wires to printed circuit boards. Molded-in header The header is available in three configurations: top, side, and bottom entry. The posts are molded into the insulator to provide stability when mounted on printed circuit boards. This also prevents This allows the wires to be perpendicular flux from entering the connector during soldering. or parallel to the printed circuit board in any direction. Specifications Current rating: 3A AC, DC (AWG 22) Voltage rating: 250V AC, DC Temperature range: -25C to +85C (including temperature rise in applying electrical current) Contact resistance: Initial value/ 15m max. After environmental testing/ 20m max. Insulation resistance: 500M min. Withstanding voltage: 1,500V AC/minute Applicable wire: AWG 30 to 22 Applicable PC board thickness: 1.6mm * Compliant with RoHS. * Refer toGeneral Instruction and Notice when using Terminals and Connector at the end of this catalog. * Contact JST for details. Standards Recognized E60389 0 Certified LR20812 1 J50168090 2 1NH CONNECTOR Contact Applicable wire Q ty / Model No. reel 2 mm AWG Insulation O.D. (mm) SHF-001T-0.8BS 0.08 to 0.33 28 to 22 1.2 to 1.7 9 5,000 SHF-002T-0.8BS 0.05 to 0.08 30 to 28 0.9 to 1.2 3.8 4 2.2 1.7 1.2 Material and Finish Phosphor bronze, tin-plated (reflow treatment) RoHS compliance Note: 1. Contact JST for gold-plated products. 2. Also contact JST if you require shielded wires, thin wires or other special 0.7 wires. 3. Contact JST for brass products. 1.95 Housing Dimensions (mm) Q ty / Cir- Model No. bag cuits AB C 2 H 2P-SHF-AA 2.5 5.7 8.7 1,000 3 H 3P-SHF-AA 5.0 8.2 11.2 1,000 4 7.5 10.7 13.7 1,000 H 4P-SHF-AA 5 H 5P-SHF-AA 10.0 13.2 16.2 1,000 6 H 6P-SHF-AA 12.5 15.7 18.7 1,000 7 H 7P-SHF-AA 15.0 18.2 21.2 500 8 H 8P-SHF-AA 17.5 20.7 23.7 500 A 1.5 9 20.0 23.2 26.2 500 H 9P-SHF-AA B 3 11.7 10 H10P-SHF-AA 22.5 25.7 28.7 500 C 11 H11P-SHF-AA 25.0 28.2 31.2 500 12 27.5 30.7 33.7 500 H12P-SHF-AA 13 H13P-SHF-AA 30.0 33.2 36.2 500 14 H14P-SHF-AA 32.5 35.7 38.7 500 15 35.0 38.2 41.2 200 H15P-SHF-AA 16 H16P-SHF-AA 37.5 40.7 43.7 200 18 H18P-SHF-AA 42.5 45.7 48.7 200 20 47.5 50.7 53.7 200 H20P-SHF-AA 21 H21P-SHF-AA 50.0 53.2 56.2 200 22 H22P-SHF-AA 52.5 55.7 58.7 200 24 57.5 60.7 63.7 200 H24P-SHF-AA 25 H25P-SHF-AA 60.0 63.2 66.2 200 Material PA 6, UL94V-0, natural (white) RoHS compliance <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. H2P-SHF-AA-oo- (blank)natural (white) Kblack Rred TRtomato red Eblue Mgreen Oorange Nbrown 2 2 4.6 1.8