HILR-02VF-3-E JST

HIL CONNECTOR 3.3mm pitch/Crimp style Wire-to-wire connectors Specifications Current rating: 5A AC, DC (2 circuits AWG #18) Voltage rating: 300V AC, DC - + Temperature range: 25C to 85C (including temperature rise in applying electrical current) Contact resistance: Initial value/10m max. After environmental testing/20m max. Insulation resistance: 1,000M min. Withstanding voltage: 1,500V AC/minute Applicable wire: Conductor size/01 type AWG #24 to #20 /21 type AWG #22 to #18 Insulation O.D./01 type 1.3 to 2.5mm /21 type 1.5 to 2.7mm (when using retainer for 21 type 1.5 to 2.5mm) *Compliant with RoHS. * Refer toGeneral Instruction and Notice when using Terminals and Connector at the end of this catalog. * Contact JST for details. This HIL connector is 3.3mm pitch wire-to- Note: The current rating varies depending on the number of circuits and the wire wire connector that has a mechanism to size used in each connector. The table below lists the current rating as a function of the number of circuits and the wire size. prevent an incomplete mating when mating Current unit: A connector. Wire size (AWG) Circuits Inertia lock mechanism to prevent an #18 #20 #22 #24 4 incomplete mating 2 5 3 3 3 4 4 3 2 Box-shaped contact to prevent the influence 4 3 3 2 2 by external forces 3 6 3 2 2 Polarizing key to prevent connector from 8 3 3 2 2 mating with incorrect circuits Assembly layout List of combinations Resin color <2, 3 circuits> (Plug/ Natural Red Blue Receptacle) Polarizing key Polarizing key Polarizing key Polarizing key (34.6) Including retainer pattern pattern 1 pattern 2 pattern 3 (31.6) <4, 6, 8 circuits> (34.6) Including retainer (31.6) Plug HILP-( )V-1-S HILP-( )V-2-R HILP-( )V-3-E Model No. Receptacle HILR-( )VF-1-S HILR-( )VF-2-R HILR-( )VF-3-E Model No. 1 (13.8) (9) L JST I A A L JST A L JST 32 1 32 1 65 4 I A L JST A L JST A L JST 21 43 2 1 21 43 87 6 5 HIL CONNECTOR Contact Pin contact Socket contact Model No. Applicable wire Insulation O.D. (mm) Qty / reel 2 Pin contact Socket contact mm AWG # 0.2 0.5 24 20 1.3 2.5 5,000 SHIM-01T-P0.5 SHIF-01T-P0.5 5,000 SHIM-21T-P0.5 SHIF-21T-P0.5 0.3 0.75 22 18 1.5 2.7 Material and Finish Copper alloy, tin-plated RoHS compliance Note: Insulation O.D. is 1.5mm to 2.5mm when using retainer for 21 type barrel size contact. Applicator Applicator Crimping Crimping Contact Contact machine machine Crimp applicator Dies Crimp applicator with dies Crimp applicator Dies Crimp applicator with dies SHIM-01T-P0.5 MK/SHIF/M-01-05 APLMK SHIF/M01-05 SHIF-01T-P0.5 MK/SHIF/M-01-05 APLMK SHIF/M01-05 AP-K2N MKS-L AP-K2N MKS-L SHIM-21T-P0.5 MK/SHIF/M-21-05 APLMK SHIF/M21-05 SHIF-21T-P0.5 MK/SHIF/M-21-05 APLMK SHIF/M21-05 Contact position location numbers Retainer Contact position numbers are stamped Retainer L JST Receptacle housing Plug housing Receptacle housing Plug housing 3 3 2 2 2 2 1 1 1 1 L JST L JST 63 36 42 24 25 52 13 31 41 14 L JST L JST 84 48 37 73 62 26 51 15 L JST 2 12 1 2 3 4 12 5 6 7 8 34 1 23 12 3 45 6 I A A A A A I A