PSIP-04V-LE-A JST

PSI CONNECTOR 4.0mm pitch/Disconnectable Crimp style connectors Secure locking structure Mis-mating prevention mechanism by keying Wire-to-wire type (2 to 4 circuits/3 kinds of keying) Finger-friendly design Side entry type Large electric current was realized. Specifications Current rating: 12 A AC, DC (Refer to the following table.) Voltage rating: 300 V AC, DC Temperature range: -25C to +85C (including temperature rise in applying Single type electrical current) Contact resistance: Initial value/ 10 m max. After environmental tests/ 20 m max. Insulation resistance: 1,000 M min. Double type Withstanding voltage: 1,500 VAC/minute Applicable wire: AWG #26 to #16 * Refer toGeneral Instruction and Notice when using Terminals and Connector at the end of this catalog. * Contact JST for details. * Compliant with RoHS. Note: The current rating differs depending on the number of circuits and the wire size used in each connector. The table below lists the current rating as a function of the number of circuits and the wire size. Current unit:A Top entry type Wire size (AWG) Circuits # 16 # 18 # 20 # 22 # 24 # 26 2 12 10 8 5 4 3 3 11 9 7 5 4 3 4, 5, 6, 8 10 8 6 5 4 3 10, 12 9 7 6 5 4 3 14 9 7 6 4.5 4 3 This PSI connector is designed for wire-to- Note: Do not branch in parallel current which exceeds the rated current (e.g. more than 12 A in the case of 2 circuits with AWG #12). If branched in parallel, current board and wire-to-wire 4.0mm pitch imbalance or other problems may develop. If it is absolutely necessary to branch connector. Low insertion force type contact such a large current in parallel, design the circuits without causing any imbalance and provide an extra margin for each circuit. is adopted and it provides excellent operability. This connector has the secure Standards locking device that has the mechanism for preventing the inverse insertion. By 0 Recognized E 60389 adopting key shape and multi colors of Certified LR 20812 1 housing, prevention function of mis-mating R50259465 is considered. 2 1 PSI CONNECTOR Contact Top entry type Single type Double type Side entry type Wire-to-wire type Keying: A, B types Keying: C type Applicable F Circuits G H panel 0.8 t 1.2 1.2 t 2.0 thickness 2 13 13.3 9 6.8 0.8 2.0 3 17 17.3 13 8.4 Note: 1. The above figure is the figure viewed from the connector mounting side 2. Tolerances are non-cumulative: 0.05 mm for all centers. 3. Hole dimensions differ according to the type of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. Socket contact Applicable wire Model No. Insulation O.D. (mm) Qty / reel SPSI-001T-M1.1 SPSI-41T-M1.1 11.3 Material and Finish 2.2 6.5 4 Copper alloy, tin-plated RoHS compliance MKS-L MK/SPSI/M-001-11 APLMK SPSI/M001-11 SPSI-001T-M1.1 AP-K2N MKS-L MK/SPSI/M-41-11 APLMK SPSI/M41-11 SPSI-41T-M1.1 2 2.8