Emboss Tape SHL CONNECTOR 1.0mm pitch/Disconnectable Crimp style connectors Specifications Current rating: 1.0 A AC, DC (AWG 28) Voltage rating: 50 V AC, DC Temperature range: -25C to +85C (including temperature rise in applying electrical current) Contact resistance: Initial value/ 20 m max. After environmental tests/ 40 m max. Insulation resistance: 100 M min. Withstanding voltage: 500 VAC/minute Applicable wire: AWG 32 to 28 * Refer toGeneral Instruction and Notice when using Terminals and Connector at the end of this catalog. * Contact JST for details. * Compliant with RoHS. Standards Thin design 0 Recognized E60389 Low insertion force Deformation preventive design Certified LR20812 1 PC board layout and Assembly layout Normal type Offset type Header outline Header outline Note: 1. The above figure is the figure viewed from the connector mounting side. 2. Tolerances are non-cumulative: 0.05 mm for all centers. 3. The dimensions above should serve as a guideline. Contact JST for details. Contact Applicable wire Q ty/ Model No. 2 mm AWG Insulation O.D. (mm) reel SSHL-003T-P0.2 Material and Finish Phosphor bronze, tin-plated (reflow treatment) RoHS compliance Note: Contact JST for gold-plated products. MKS-L-10-3 MK/SSH/L-003-02 APLMK SSH/L003-02 SSHL-003T-P0.2 AP-K2N MKS-SC SC/SSH/L-003-02 APLSC SSH/L003-02 Note: *Strip-crimp applicator Contact JST for applicable wires in case that it is not usable due to wire size. 1 SHL CONNECTOR Housing Model No. Dimensions (mm) Q ty/box Circuits With protrusions AB SHLP-02V-S-B 1.0 4.6 6,000 2 5 SHLP-05V-S-B 4.0 7.6 3,000 6 SHLP-06V-S-B 5.0 8.6 3,000 Marking by Circuit No.1 7 SHLP-07V-S-B 6.0 9.6 3,000 every 5 circuit mark 8 SHLP-08V-S-B 7.0 10.6 3,000 10 SHLP-10V-S-B 9.0 12.6 2,000 11 SHLP-11V-S-B 10.0 13.6 2,000 12 SHLP-12V-S-B 11.0 14.6 2,000 14 SHLP-14V-S-B 13.0 16.6 2,000 16 SHLP-16V-S-B 15.0 18.6 1,000 SHLP-20V-S-B 19.0 22.6 1,000 20 22 SHLP-22V-S-B 21.0 24.6 1,000 26 SHLP-26V-S-B 25.0 28.6 1,000 30 SHLP-30V-S-B 29.0 32.6 1,000 Material PBT, UL94V-0, natural (white) RoHS compliance Shrouded header Model No. Insulation O.D. (mm) Normal type Q ty/ Circuits Normal type Offset type reel Normal type Offset type AB AB 2 SM02B-SHLS-TF 1.0 4.8 4,500 SM05B-SHLS-TF 4.0 4,500 5 7.8 6 SM06B-SHLS-TF 5.0 8.8 4,500 7 SM07B-SHLS-TF 6.0 9.8 4,500 4,500 8 SM08B-SHLS-TF SM08B-SHLS-1-TF 7.0 10.8 7.0 12.0 10 SM10B-SHLS-TF 9.0 12.8 4,500 11 SM11B-SHLS-TF 10.0 13.8 4,500 Circuit No.1 4,500 12 SM12B-SHLS-TF 11.0 14.8 14 SM14B-SHLS-TF SM14B-SHLS-1-TF 13.0 16.8 13.0 18.0 4,500 16 SM16B-SHLS-TF 15.0 18.8 4,500 Offset type 4,500 20 SM20B-SHLS-TF SM20B-SHLS-1-TF 19.0 22.8 19.0 24.0 22 SM22B-SHLS-TF 21.0 24.8 4,500 26 SM26B-SHLS-TF 25.0 28.8 4,500 4,500 30 SM30B-SHLS-TF 29.0 32.8 Material and Finish Contact: Phosphor bronze, copper-undercoated, tin-plated (reflow treatment) Housing: PA, UL94V-0, natural (ivory) Solder tab: Brass, copper-undercoated, tin-plated (reflow treatment) Circuit No.1 RoHS compliance This product displays (LF)(SN) on a label. Note: Contact JST for the headers with gold-plated pins. 2