VH CONNECTOR 3.96mm pitch/Disconnectable Crimp style connectors Specifications Current rating: 10 A AC, DC (AWG 16) Voltage rating: 250 V AC, DC Temperature range: -25C to +85C (including temperature rise in applying electrical current) Contact resistance: Initial value/ 10 m max. After environmental tests/ 20 m max. Insulation resistance: 1,000 M min. Withstanding voltage: 1,500 VAC/minute Applicable wire: AWG 22 to 16 Applicable PC board thickness: 1.6 mm Note: Do not branch in parallel current which exceeds the rated current. If branched in parallel, current imbalance or other problems may develop. If it is absolutely necessary to branch such a large current in parallel, be sure to use contacts made of phosphor bronze. Design the circuits without causing imbalance and provide an extra margin for each circuit. * Refer toGeneral Instruction and Notice when using This small, field-proven connector for Terminals and Connector at the end of this catalog. printed circuit boards is reliable and has a * Contact JST for details. large current carrying capacity. It can be * Compliant with RoHS. used with a wide variety of signal, power supply, and output circuits that appear in Standards consumer electronic products. 0 Recognized E60389 Proven box contact Certified LR20812 1 Compact connector with a large capacity R75122 2 Secure contact and mounting Locking header Locking header Top entry type Side entry type *11.0 max. when used with the VR connector receptacle. Shrouded header Locking header Side entry type with PCB stabilizer No.1 Note: 1. The above figure is the figure viewed from soldering side. 2. Tolerances are non-cumulative: 0.05mm for all centers. 3. Please consider the pattern layout design in case of applying the large current. 4. Hole dimensions differ according to the type of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. 1 JST 6 1 2 3 4 5 6VH CONNECTOR Contact Applicable wire Insulation O.D. Model No. Q ty / reel (mm) 2 mm SVH-21T-P1.1 SVH-41T-P1.1 Material and Finish Phosphor bronze, tin-plated (reflow treatment) RoHS compliance Note: 1. Contact JST for brass products. 2. When using retainer mountable type housing, applicable wire s insulation O. D. shall be 1.7 to 2.2mm. Crimping Crimping machine machine SVH-21T-P1.1 SVH-41T-P1.1 Note: *Strip-crimp applicator Housing N type M type Retainer mountable type Note: 1. Models identified as VHR-( ) M incorporate measures to prevent Model No. Dimensions (mm) Q ty / electric shock and are thus safer in regard to high voltages. Circuits Retaine bag N type M type mountable type 2. The applicable housing for 2 circuits shrouded header isVHR-2 only.VHRR-2 is not applicable. VHR-2N VHR-2M VHRR-2N VHR-3N VHR-3M VHRR-3N (*) N / M type 1,000 VHR-4N VHR-4M Retainer mountable type 500 VHR-5N VHR-5M VHRR-5N VHR-6N VHR-6M <For reference> As the color identification, VHR-7N VHR-7M VHRR-7N the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. VHR-8N VHRR-8N VHR-9N VHR-9M VHRR-9N ex. VHR-2N-oo- VHR-10N (blank)natural (white) VHR-11N BKblack Rred BLblue Mgreen Dorange Yyellow PKpink Hgray Material PA 6, UL94V-0, natural (white) RoHS compliance Retainer Circuits Model No. A Q ty / bag 2 VHS-2V 3.70 1,000 3 7.52 1,000 VHS-3V 15.44 1,000 5 VHS-5V 23.36 1,000 7 VHS-7V 8 VHS-8V 27.32 1,000 9 VHS-9V 31.28 1,000 Material Glass-filled PA 66, UL94V-0, natural (ivory) RoHS compliance 2 2 circuits : 2.6 3 to 9 circuits : 4.2