MCP Indoor Call Point Range MCP1 - Resistor & Clean Contact Model (Red Versions) Product Benefits Unique Plug & Play installation concept Total Flex-Ability in the choice of operating element Anti-Tamper facility Enhanced aesthetics Fully approved to the latest standards Backward compatibility Product Approvals 166b/39 & 166b/40 Pending Product Overview Installation efficiency, flexibility and full compliance with the latest standards are at the heart of the new MCP Indoor Call Point range. Installation time and ultimately cost, are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block, where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple, but effective with no re-termination required and no time wasted. Through new standards and legislation, both break glass and re-settable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability , the new MCP range can be configured as either a break glass or re-settable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered. All MCP Indoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm. Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard. The MCP1A product version is supplied with both a resistor and normally open clean contact electrical options. These options are easily utilised by simply connecting the terminal block to the required connection in the back of the MCP1 product. A variety of resistor versions are available, with both 470 and 680 offered as standard. However, other resistor types can be provided upon request. The MCP1B product version allows for connection to Savwire systems. PRODUCTDATASHEETPRODUCTDATASHEET Electrical Specification Figure .1 Connection Details: See Figure .1 MUS1A-R MCP1B-X Max: 30VDC 2 Cable Termination: 0.5-2.5mm Environmental Specification Humidity: 0-95% non-condensing 0 0 Operating Temperature: -40 C to +55 C 0 0 Storage Temperature: -40 C to +55 C Ingress Protection (IP) Rating: IP24D Mechanical Specification Material: PC/ABS Weight: 110g Flush/160g Surface Colour: Red, Ral 3001 Ordering Information Model Electrical Configuration Operating Mounting Markings Element Stock MUS1A-R470FG-01 470Ohm Resistor & N O 24VDC Glass Flush EN54-11 MUS1A-R470FF-01 470Ohm Resistor & N O 24VDC Flexible Flush EN54-11 MUS1A-R680FG-01 680Ohm Resistor & N O 24VDC Glass Flush EN54-11 MUS1A-R470SG-01 470Ohm Resistor & N O 24VDC Glass Surface EN54-11 MUS1A-R470SF-01 470Ohm Resistor & N O 24VDC Flexible Surface EN54-11 MUS1A-R680SG-01 680Ohm Resistor & N O 24VDC Glass Surface EN54-11 MUS1B-R470SG01 470Ohm Resistor & N O 24VDC (Savwire) Glass Surface EN54-11 Non-Stock MCP1A-R680FF-01 680Ohm Resistor & N O 24VDC Flexible Flush EN54-11 MCP1B-R470FG-01 470Ohm Resistor & N O 24VDC (Savwire) Glass Flush EN54-11 MCP1B-R470FF-01 470Ohm Resistor & N O 24VDC (Savwire) Flexible Flush EN54-11 MCP1A-R680SF-01 680Ohm Resistor & N O 24VDC Flexible Surface EN54-11 MCP1B-R470FG-01 470Ohm Resistor & N O 24VDC (Savwire) Glass Surface EN54-11 MCP1B-R470FF-01 470Ohm Resistor & N O 24VDC (Savwire) Flexible Surface EN54-11 N O = Normally Open Contact Accessories Code Description SC070 Pack Of Ten Test Keys KG1 x 5 Pack Of five Glass Elements PS210 Flexible Operating Element PS200 Plain Hinged Cover SC071 Pack Of Ten Terminal Blocks KAC Alarm Company Limited, 15-19 Trescott Road, Smallwood, Redditch, England B98 7AH. T: +44 (0) 1527 406655, Document Ref. F: +44 (0) 1527 406677, LIT:MCP1 E: sales kac.co.uk Rev. No. 01 W: www.kac.co.uk E. & O.E.