FIXED THICK FILM CHIP RESISTORS RECTANGULAR TYPE & ANTI SURGE KAMAYA OHM RPC Features 1. Higher Anti surge performance compared with RMC (general use) 1 2 2. Halogen* and Antimony* free product 1 * Cl or Br 900ppm Cl+Br 1500ppm 2 * Sb2O3 900ppm 3. Stability Class : 5% Dimensions L cc Rated resistance value is marked with 3-digit on the over coating. dd Unit : mm *Unit weight/pc. Style Metric Inch L W Hc d RPC20 2012 0805 2.0 0.1 1.25 0.10 0.55 0.10 0.3 0.2 0.4 0.2 5mg RPC32 3216 1206 3.2 0.15 1.6 0.15 0.55 0.10 0.3 0.2 0.5 0.25 9mg 2.5 RPC35 3225 1210 3.2 0.15 0.15 0.55 0.15 0.3 0.2 0.5 0.25 16mg RPC50 5025 2010 5.0 0.15 2.5 0.15 0.55 0.15 0.3 0.15 0.6 0.2 25mg RPC63 6332 2512 6.3 0.15 3.2 0.15 0.55 0.15 0.3 0.15 0.6 0.2 40mg *Values for reference Part Number Description Example Style RPC 50 103 JTE Product Type Size Tolerance on Rated Resistance * Packaging & Standard Qty. (Min.) J 5% Code Metric Inch B Bulk (Loose Package) 1,000pcs. All Styles K 10% 20 2012 0805 M 20% 32 3216 1206 RPC20 TP Paper Tape 5,000pcs. 35 3225 1210 RPC32 50 5025 2010 Rated Resistance 63 6332 2512 RPC35 E24 Series 4,000pcs. TE Embossed Tape RPC50 e.g. : 2R2=2.2 ohm 3-Digit RPC63 103=10k ohm *Refer to Tape and Packaging information on pages 56 and 57. Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 12 H WKAMAYA OHM FIXED THICK FILM CHIP RESISTORS RECTANGULAR TYPE & ANTI SURGE RPC Ratings Combinations of Rated Resistance Range and Size Temperature Coefficient of Resistance Tolerance on Rated Dissipation Limiting Element Preferred Number Isolation Category Temperature Style Metric at 70C Voltage Series for Voltage Range Rated Resistance Rated Resistance Temperature Coefficient -6 (Inch) W V Resistors V C Range of Resistance 10 /C 2012 RPC20 0.125 150 (0805) 3216 RPC32 0.25 (1206) J( 5%) 0.27 0.91 200 3225 100 K( 10%) E24 500 55 155 RPC35 1 1M 0.5 (1210) 200 1.1M 22M 200 M( 20%) 5025 RPC50 0.75 (2010) 6332 RPC63 1.0 (2512) Note1. Rated Voltage = (Rated Dissipation)(Rated Resistance). (d.c. or a.c. r.m.s. Voltage) Note2. Limiting Element Voltage can only be applied to resistors, when the resistance value is equal to or higher than the critical resistance value. Note3. Critical Resistance Value is the resistance value at which the rated voltage is equal to the limiting element voltage. Derating Curve 1Pulse Limiting Power Curve (e.g 100 value for reference) The derated values of dissipation for temperatures in ex- RPC63RPC63RPC63 cess of 70C shall be indicated by the following Curve. RPC50RPC50RPC50 RPC35RPC35RPC35 100 RMC1RMC1RMC1 RPC32RPC32RPC32 RPC20RPC20RPC20 RMC1/2RMC1/2RMC1/2 RMC1/4RMC1/4RMC1/4 RMC1/8RMC1/8RMC1/8 RMC1/10RMC1/10RMC1/10 Area of recommended operation 0 55 70 155 Ambient Temperature (C) Climatic Category 55/155/56 Lower Category Temperature 55C Upper Category Temperature 155C Duration of the Damp heat, Steady-Style Test 56 days Pulse duration (ms) * pulse limiting power curve is different from resistance value. * Please contact Kamaya sales department for the details. Performance Characteristics JIS C 5201-1 : 1998 Description Requirements Test Methods No breakdown or flashover Voltage proof Clause 4.7 500Va.c.,60s R 1G ohm Variation of resistance Clause 4.8 +20C/ 55C/+20C/+155C/+20C See Ratings Table with temperature R (1%+0.05 ohm) Clause 4.13 The applied voltage shall be 2.5 times of the rated voltage or twice Overload No visible damage, legible marking of the limiting element voltage, whichever is the less severe, 2s. Solderability In accordance with Clause 4.17.4.5 Clause 4.17 235C, 2s Resistance to Clause 4.18 After immersion into the flux, the immersion into solder R (1%+0.05 ohm) soldering heat shall be carried out in Solder bath at 260C for 5s. Rapid change of R (1%+0.05 ohm) No visible damage Clause 4.19 Cycle : 55C/+155C 5times temperature Clause 4.23 Dry/Damp heat(12+12h cycle), first cycle./ R (5%+0.1 ohm) No visible damage Climatic sequence Cold/Damp heat(12+12h cycle), remaining cycle./ D.C.Load. Damp test, steady state R (5%+0.1 ohm) No visible damage, legible marking Clause 4.24 40C, 95%R.H., 56 days, test a) and b) of Clause 4.24.2.1 Endurance at 70C R (5%+0.1 ohm) No visible damage Rated voltage, 1.5O, 0.5OF, 70C, 1,000h Clause 4.25.1 Endurance at the upper R (5%+0.1 ohm) No visible damage Clause 4.25.3 155C, no-load, 1,000h. category temperature Adhesion No visible damage Clause 4.32 5N, 10s Bend strength of the Clause 4.33 RPC20, 32, 35 Amount of bend : 3 mm R (1%+0.05 ohm) face plating RPC50, 63 Amount of bend : 1 mm Product specifications contained in this catalogue are subject to change at any time without notice. Please confirm specifications with your order. RoHS 13 Percentage of the rated dissipation(%) Pulse limiting power (w)