MCB2388U Keil

MCB2300 Quick Start Guide Getting Started and Blinky Example This Quick Start Guide introduces the MCB2300 boards Connecting to your Target for the LPC2360 and LPC2370 devices from NXP. It The target is powered via your PC, through its USB port. The Keil shows how to install the ARM software development tools ULINK family of adapters connect the USB port of your PC to and run a variety of example projects. the JTAG port of your target board allowing you to download and debug embedded programs running on your target hardware. Installing the Software ULINK2 and ULINK-ME support standard JTAG and Real-Time To install the evaluation version of the ARM RealView Agent for on-the-fly target debugging. Microcontroller Development Kit (MDK) n Insert the CD-ROM into your PC. Using ULINK2 If the opening screen does not appear, run SETUP from the CD root directory The ULINK2 Adapter connects to the MCB2300 using the 20-pin ribbon cable. n Click Install Evaluation Software, then ARM Compiler (Eval Tools) n Follow the setup program instructions Using ULINK-ME The ULINK-ME Adapter connects directly to the MCB2300 20-pin JTAG connector. The SETUP program installs Keil mVision and the ARM RealView compilation tools. nThe LEDs on the target are controlled by the potentiometer Blinky Example setting. As the setting increases, more LEDs are switched on. This example demonstrates the ease of downloading and debugging an application on a target board. n Start debug mode It can be found at: Using the debugger commands, you may: C: Keil ARM Boards Keil MCB2300 Blinky n Single step through code To use this example n Set breakpoints n Start mVision nOpen the Blinky.uv2 project file n Run the application Project - Open n Review variables in the watch window nCompile and link the Blinky application Project - Build n Reset the device to re-run the application nProgram the application into on-chip Flash ROM n Use the yellow arrow (program counter) to view the Flash - Download current assembler or C statement www.keil.com/mcb2300RTOS & Real-Time Library Examples HTTP with Ethernet Flash File System DO NOT RECOMPILE THIS EXAMPLE WITHOUT AN DO NOT RECOMPILE THIS EXAMPLE WITHOUT AN RL-ARM LICENSE RL-ARM LICENSE This example demonstrates easy networking and control of This example enables you to create, read, copy and delete files hardware across a TCP/IP network. It configures the LAN from an SD/MMC flash memory card on the evaluation board. network parameters for the evaluation board automatically if a DHCP server is available in your LAN. Otherwise, configure your It can be downloaded from: PC for fixed IP address as detailed in the example. www.keil.com/download/docs/338.asp It can be downloaded from: To use this example: n www.keil.com/download/docs/328.asp Connect the MCB2300 boards COM1 port to the COM1 port on your PC via a serial cable and start a hyperterminal session To use this example: configured for 115200 baud, 8 bits, no parity, 1 stop bit, n XON/XOFF. Start mVision n n Open the Http demo.uv2 project file and download to Flash Start mVision n Install an SD/MMC flash memory card and power up the board Project - Open Flash - Download n Open your web browser and enter the address