Daligit MMano eter leo 1 with peak Drecor ing / peak Measuring tera : 5 kh z 1 leo e i LEO 1 is a micro-processor controlled, accurate and versatile digital pressure measuring instru- ment with integrated fast peak-, max.- and min.-function. The instrument is used in two modes: MAnO -Mode The pressure is measured twice per second and displayed. The top display indicates the actual pressure, the bottom display shows the MAX.- or MIn- pressure since the last RESET. PEAK-Mode The pressure is measured 5000 times per second and is brought to the display twice per second. The top display shows the actual pressure, the bottom display the peak- (MAX.) or trough-pressure (MIn.). LEO 1 has two operating keys. The left key is to turn the instrument on, to select the functions and the pressure units. The right key executes the selected function or unit. The right key is also used to switch between the MAX.- and MIn.-value in both modes. The instrument has the following functions: RESET With the RESET-function, the MAX.- and MIn.-value is set to the actual pressure value. ZERO The ZERO-function allows to set any value as a new Zero reference. Barometric pressure variations can thus be compensated. The factory setting of the Zero for the ranges -13 bar or -130 bar is at 0 bar Bat LoW 2 absolute. For sealed gauge pressure measurements, activate ZERO SEt at ambient hpa mBar kp/cm pressure. Instruments with the ranges > 30 bar are calibrated with ambient pressure as a Zero reference. COnT The instrument turns off 15 Min. after the last key function. Activating COnT (Conti- peaK ma V pSi kMpa nuous) deactivates this automatic turn-off. MaX f UnITS All standard instruments are calibrated in bar. The pressure can be 2 Min C indicated in the following units: bar, mbar/hPa, kPa, MPa, PSI, kp/cm ZeRo Mano ReSet off Optional accessories: - Protective rubber covering (not for Ei-version) - Carrying bag Display Segments LEO 1 SpeCifiCationS Leo 1 ei intrinsically safe version, 94/9/Ce Pressure Ranges, Resolution, Overpressure: Range Resolution Overpressure -13 bar 1 mbar 10 bar Classification: II 1 G EEx ia IIC T6 or T5 -130 bar 10 mbar 60 bar Certification File: LCIE 01 ATEX 6001 X 0300 bar 100 mbar 400 bar 0700 bar 200 mbar 700 bar The EEx ia version of LEO 1 incorporates 01000 bar 200 mbar 1000 bar an additional protection switch. Functions, ranges and accuracy Accuracy RT (room temperature) * < 0,1 %FS are identical to the standard Total Error Band (050 C) < 0,2 %FS version. Storage- / Operating Temperature -2070 C / 050 C Compensated Temperature Range 050 C Supply 3 V battery, type CR 2430 Battery Life 1000 hours continuous operation in Mano-Mode 150 hours continuous operation in Peak-Mode Pressure Connection G1/4 Protection, CEI 529 IP65 Diameter x Height x Depth 76 x 118 x 42 mm Weight 210 g * Including linearity, repeatability and hysteresis. Subject to alterations 07/07 KELLER AG fr Druckmesstechnik St. Gallerstrasse 119 CH-8404 Winterthur Tel. +41 (0)52 - 235 25 25 Fax +41 (0)52 - 235 25 00 KELLER Ges. fr Druckmesstechnik mbH Schwarzwaldstrasse 17 D-79798 Jestetten Tel. +49 (0)7745 - 9214 - 0 Fax +49 (0)7745 - 9214 - 60 Companies approved to ISO 9001:2000 www.keller-druck.comX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for keller manufacturer: Other Similar products are found below : LEO1 / -1...30BAR / 81000 LEO2 / -1...3BAR / 81021 PA-21Y / 400BAR / 81478.33 / 0-5V PR-21Y / 10BAR / 81554.33 / 4-20MA PAA- 21Y / 2.5BAR / 81554.33 / 0-5V