Snap-In Aluminum Electrolytic Capacitors
ALC10, +85C
Overview Applications
The KEMET ALC10 snap-in capacitors covers a wide range
The KEMET ALC10 capacitors are ideally suited for
of case sizes and voltage ratings. The ALC10 is designed
industrial and commercial applications demanding high
for high voltage, it is up to 600 VDC, has high ripple current
reliability and long life expectancy. Typical applications
applications and features surge voltage capability and very
include frequency converters, uninterruptible power supply
long-life performance.
(UPS) systems and switch mode power supplies (SMPS).
Benefits
Compact size
, I applied)
Long life, up to 18,000 hours at +85C (V
R R
High ripple current
High voltage
Excellent surge voltage capability
Optimized designs available upon request
Part Number System
ALC10 A 392 BB 040
Series Termination Capacitance Code (F) Size Code Rated Voltage (VDC)
Snap-In See Termination Table First two digits See Dimension Table 035 = 35 350 = 350
Aluminum represent significant 040 = 40 400 = 400
Electrolytic figures. Third digit 063 = 63 450 = 450
specifies number of 100 = 100 500 = 500
zeros. 200 = 200 550 = 550
250 = 250 600 = 600
One world. One KEMET
KEMET Electronics Corporation KEMET Tower One East Broward Boulevard A4020_ALC10 1/29/2020 1
Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comSnap-In Aluminum Electrolytic Capacitors ALC10, +85C
Performance Characteristics
Item Performance Characteristics
Capacitance Range 47 100,000 F
Rated Voltage 35 600 VDC
Operating Temperature 40 to +85C
Capacitance Tolerance 20% at 100 Hz/+20C
Rated Voltage and Ripple
D (mm) Rated Voltage at +85C (hours)
Current at +85C (hours)
25 10,000 16,000
Operational Lifetime
30 13,000 21,000
35 15,000 24,000
40 50 18,000 29,000
End of Life Requirement C/C < 10%, ESR < 2 x initial ESR value, IL < initial specified limit
Shelf Life 2,000 hours at +85C or 30,000 hours at +40C 0 VDC
I = 0.006 CV or 6,000 (A, whichever is smaller)
Leakage Current
C = rated capacitance (F), V = rated voltage (VDC). Voltage applied for 5 minutes at +20C.
Procedure Requirements
0.75 mm displacement amplitude
or 10 G maximum acceleration.
D 40 mm Vibration applied for three
No leakage of electrolyte
2-hour sessions at 10 500 Hz
or other visible damage.
(capacitor clamped by body).
Vibration Test Specifications
Deviations in capacitance from
0.35 mm displacement amplitude
initial measurements must not
or 5 G maximum acceleration.
exceed: C/C < 5%
D > 40 mm Vibration applied for three
0.5-hour sessions at 10 55 Hz
(capacitor clamped by body).
Standards IEC 603844 long life grade 40/85/56
Surge Voltage
Voltage (VDC)
Condition
35 40 63 100 200 250 350 400 450 500 550 600
30s Surge followed by a no load
40.25 46 72.5 115 230 288 385 440 495 550 605 660
period of 330s, 1,000 cycles at +85C
KEMET Electronics Corporation KEMET Tower One East Broward Boulevard A4020_ALC10 1/29/2020 2
Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com