Snap-In Aluminum Electrolytic Capacitors ALC10 Series, +85C Overview Applications KEMETs ALC10 Series of snap-in capacitors covers a wide KEMETs ALC10 Series of capacitors is ideally suited for range of case sizes and voltage ratings. The ALC10 Series is industrial and commercial applications demanding high designed for high voltage, up to 550 VDC, high ripple current reliability and long life expectancy. Typical applications applications and features surge voltage capability and very include frequency converters, uninterruptible power supply long-life performance. (UPS) systems and switch mode power supplies (SMPS). Benefits Compact size , I applied) Long life, up to 18,000 hours at +85C (V R R High ripple current High voltage Excellent surge voltage capability Optimized designs available upon request Part Number System ALC10 A 392 BB 040 Series Termination Capacitance Code (F) Size Code Rated Voltage (VDC) Snap-In type See Termination Table First two digits See Dimension Table 035 = 35 350 = 350 Aluminum Electrolytic represent significant 040 = 40 400 = 400 figures. Third digit 063 = 63 450 = 450 specifies number of 100 = 100 500 = 500 zeros. 200 = 200 550 = 550 250 = 250 One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.com A4020 ALC10 2/6/2017 1Snap-In Aluminum Electrolytic Capacitors ALC10 Series, +85C Performance Characteristics Item Performance Characteristics Capacitance Range 56 82,000 F Rated Voltage 35 550 VDC Operating Temperature 40 to +85C Capacitance Tolerance 20% at 100 Hz/+20C Rated Voltage and Ripple D (mm) Rated Voltage at +85C (hours) Current at +85C (hours) 25 10,000 16,000 Operational Lifetime 30 13,000 21,000 35 15,000 24,000 40 50 18,000 29,000 End of Life Requirement C/C < 10%, ESR < 2 x initial ESR value, IL < initial specified limit Shelf Life 2,000 hours at +85C or 30,000 hours at +40C 0 VDC I = 0.006 CV or 6,000 (A, whichever is smaller) Leakage Current C = rated capacitance (F), V = rated voltage (VDC). Voltage applied for 5 minutes at +20C. Procedure Requirements 0.75 mm displacement amplitude or 10 g maximum acceleration. D 40 mm Vibration applied for three No leakage of electrolyte 2-hour sessions at 10 500 Hz or other visible damage. (Capacitor clamped by body). Vibration Test Specifications Deviations in capacitance from 0.35 mm displacement amplitude initial measurements must not or 5 g maximum acceleration. exceed: C/C < 5% D > 40 mm Vibration applied for three 0.5-hour sessions at 10 55 Hz (Capacitor clamped by body). Standards IEC 603844 long life grade 40/85/56 Surge Voltage Voltage (VDC) Condition 35 40 63 100 200 250 350 400 450 500 550 30s Surge followed by a no load 40.25 46 72.5 115 230 288 385 440 495 550 605 period of 330s, 1,000 cycles at +85C 500 ms surge, 100 cycles at 20C, occurring randomly throughout the 350 400 500 520 550 600 620 life of the capacitor KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.com A4020 ALC10 2/6/2017 2