Snap-In Aluminum Electrolytic Capacitors ALC10 Series, +85C Overview Applications KEMETs ALC10 Series of snap-in capacitors covers a wide KEMETs ALC10 Series of capacitors is ideally suited for range of case sizes and voltage ratings. The ALC10 Series is industrial and commercial applications demanding high reliability designed for high voltage, up to 550 VDC, high ripple current and long life expectancy. Typical applications include frequency applications and features surge voltage capability and very long- converters, uninterruptible power supply (UPS) systems and life performance. switch mode power supplies (SMPS). Benefits Compact size Long life, up to 18,000 hours at +85C (V , I applied) R R High ripple current High voltage Excellent surge voltage capability Optimized designs available upon request Part Number System ALC10 A 392 BB 040 Series Termination Capacitance Code (F) Size Code Rated Voltage (VDC) Snap-In type Aluminum See Termination Table First two digits represent See Dimension Table 035 = 35 350 = 350 Electrolytic significant figures. Third 040 = 40 400 = 400 digit specifies number of 063 = 63 450 = 450 zeros. 100 = 100 500 = 500 200 = 200 550 = 550 250 = 250 One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com A4020 ALC10 8/27/2015 1Snap-In Aluminum Electrolytic Capacitors ALC10 Series, +85C Performance Characteristics Item Performance Characteristics Capacitance Range 56 82,000 F Rated Voltage 35 550 VDC Operating Temperature -40 to +85C Capacitance Tolerance 20% at 100 Hz / +20C Rated Voltage and Ripple Current D (mm) Rated Voltage at +85C (hours) at +85C (hours) 25 10,000 16,000 Operational Lifetime 30 13,000 21,000 35 15,000 24,000 40 50 18,000 29,000 End of Life Requirement C/C < 10%, ESR < 2 x initial ESR value, IL < initial specified limit Shelf Life 2,000 hours at +85C or 30,000 hours at +40C 0 VDC I = 0.006 CV or 6,000 (A, whichever is smaller) Leakage Current C = rated capacitance (F), V = rated voltage (VDC). Voltage applied for 5 minutes at +20C. Procedure Requirements 0.75 mm displacement amplitude or 10 g maximum acceleration. D 40 mm Vibration applied for three No leakage of electrolyte or other 2-hour sessions at 10 500 Hz visible damage. Deviations in Vibration Test Specifications (Capacitor clamped by body). capacitance and tan from initial 0.35 mm displacement amplitude measurements must not exceed: or 5 g maximum acceleration. C/C < 5% D > 40 mm Vibration applied for three 0.5-hour sessions at 10 55 Hz (Capacitor clamped by body). Standards IEC 603844 long life grade 40/85/56 Surge Voltage Voltage (VDC) Condition 35 40 63 100 200 250 350 400 450 500 550 30s Surge followed by a no load 40.25 46 72.5 115 230 288 385 440 495 550 605 period of 330s, 1,000 cycles at +85C 500 ms surge, 100 cycles at 20C, occurring randomly throughout the life 350 400 500 520 550 600 620 of the capacitor KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com A4020 ALC10 8/27/2015 2