Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
Commercial Off-The-Shelf (COTS) for Higher Reliability
Applications, X7R Dielectric, 6.3 250 VDC
Overview
KEMETs COTS program is an extension of KEMET knowledge All COTS testing includes voltage conditioning and post-electrical
of high reliability test regimes and requirements. KEMET testing as per MILPRF55681. For enhanced reliability, KEMET
regularly supplies up-screened products by working with also provides the following test level options and conformance
customer drawings and imposing specified design and test certifications:
requirements. The COTS program offers the same high quality
Test Level A Test Level B Test Level C
and high reliability components as up-screened products,
but at a lower cost to the customer. This is accomplished by
Voltage Conditioning Voltage Conditioning Voltage Conditioning
DWV DWV DWV
eliminating the need for customer-specific drawings to achieve
IR@25C IR@25C IR@25C
CAP CAP CAP
the reliability level required for customer applications. A series
DF DF DF
of tests and inspections have been selected to provide the
accelerated conditioning and 100% screening necessary to
PDA 8% PDA 8% PDA 8%
eliminate infant mortal failures from the population.
C of C DPA DPA
KEMETs X7R dielectric features a 125C maximum operating
C of C 85/85
temperature and is considered temperature stable. The
Electronics Components, Assemblies & Materials Association
C of C
(EIA) characterizes X7R dielectric as a Class II material.
Components of this classification are fixed, ceramic dielectric
capacitors suited for bypass and decoupling applications or
for frequency discriminating circuits where Q and stability of
capacitance characteristics are not critical. X7R exhibits a
predictable change in capacitance with respect to time and
voltage and boasts a minimal change in capacitance with
reference to ambient temperature. Capacitance change is
limited to 15% from 55C to +125C.
Ordering Information
C 1210 T 104 K 5 R A C TU
Rated
Case Size Specification/ Capacitance Capacitance Termination Packaging/
Ceramic Voltage Dielectric Test Level
1
( x ) Series Code (pF) Tolerance Finish Grade (C-Spec)
(VDC)
0402 T = COTS Two J = 5% 9 = 6.3 R = X7R A = Testing per MIL- C = 100% See
0603 significant K = 10% 8 = 10 PRF-55681 PDA 8% Matte SnPackaging
0805 digits and M = 20% 4 = 16 B= Testing per MIL- L = SnPb (5% C-Spec
1206 number of 3 = 25 PRF-55681 PDA 8%, DPA Pb minimum) Ordering
1210 zeros 5 = 50 per EIA-469 Options Tabl
1812 1 = 100 C = Testing per MIL-
2220 2 = 200 PRF-55681 PDA 8%, DPA
A = 250 per EIA-469, Humidity per
MIL-STD-202, Method 103,
Condition A
1
Additional termination finish options may be available. Contact KEMET for details.
One world. One KEMET
KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1027_X7R_COTS_SMD 6/12/2019 1
Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comSurface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
Commercial Off-The-Shelf (COTS) for Higher Reliability Applications, X7R Dielectric, 6.3 250 VDC
Packaging C-Spec Ordering Options Table
Packaging/Grade
1
Packaging Type
Ordering Code (C-Spec)
Bulk Bag/Unmarked Not required (Blank)
7" Reel/Unmarked TU
7411 (EIA 0603 and smaller case sizes)
13" Reel/Unmarked
7210 (EIA 0805 and larger case sizes)
7" Reel/Marked TM
7040 (EIA 0603)
13" Reel/Marked
7215 (EIA 0805 and larger case sizes)
2
7" Reel/Unmarked/2mm pitch 7081
2
13" Reel/Unmarked/2mm pitch 7082
1
Default packaging isBulk Ba. An ordering code C-Spec is not required forBulk Ba packaging.
1
The termsMarke andUnmarke pertain to laser marking option of capacitors. All packaging options labeled asUnmarke will contain
capacitors that have not been laser marked. Please contact KEMET if you require a laser marked option. For more information seeCapacitor Markin.
2
The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case
size devices. For more information regarding 2 mm pitch option seeTape & Reel Packaging Informatio.
Benefits
55C to +125C operating temperature range DC voltage ratings of 6.3 V, 10 V, 16 V, 25 V, 50 V, 100 V,
Lead (Pb)-free, RoHS and REACH compliant 200 V, and 250 V
Voltage conditioning and post-electrical testing per Capacitance offerings ranging from 10 pF to 22 F
MILPRF55681 Available capacitance tolerances of 5%, 10%, and 20%
Destructive Physical Analysis (DPA) per EIA469 Non-polar device, minimizing installation concerns
Biased humidity testing (85/85) per MILSTD202 100% pure matte tin-plated termination finish allowing for
Certificate of Compliance excellent solderability
Temperature stable dielectric SnPb termination finish option available upon request
EIA 0402, 0603, 0805, 1206, 1210, 1812, and (5% Pb minimum)
2220 case sizes
Applications
Typical applications include military, space quality and high reliability electronics.
KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1027_X7R_COTS_SMD 6/12/2019 2
Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com