Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Temperature 150C, Ultra-Stable X8R Dielectric, 25 100 VDC (Commercial & Automotive Grade) Overview KEMETs Ultra-Stable X8R dielectric features a 150C maximum widely used in automotive circuits as well as general high tem- operating temperature, offering the latest in high temperature perature applications. dielectric technology and reliability for extreme temperature ap- plications. It offers the same temperature capability as conven- In addition to commercial grade, automotive grade devices are tional X8R, but without the capacitance loss due to applied DC available and meet the demanding Automotive Electronics Coun- voltage. Ultra-Stable X8R exhibits no change in capacitance with cils AECQ200 qualification requirements. respect to voltage and boasts a minimal change in capacitance with reference to ambient temperature. It is a suitable replace- ment for higher capacitance and larger footprint devices that fail to offer capacitance stability. Capacitance change with respect to temperature is limited to 15% from -55C to +150C. Driven by the demand for a more robust and reliable component, Ultra-Stable X8R dielectric capacitors were developed for critical applications where reliability and capacitance stability at higher operating temperatures are a concern. These capacitors are Ordering Information C 1210 C 184 K 3 H A C AUTO Case Size Specification/ Capacitance Capacitance Failure Rate/ Packaging/Grade 2 Ceramic Voltage Dielectric Termination Finish 1 2 ( x ) Series Code (pF) Tolerance Design (C-Spec) 0402 C = Standard 2 significant F = 1% 3 = 25 V H = Ultra A = N/A C = 100% Matte Sn Blank = Bulk Bag 0603 digits + G = 2% 5 = 50 V Stable X8R L = SnPb (5% (Commercial Grade) 0805 number of J = 5% 1 = 100 V minimum) TU = 7 Tape & Reel/ 1206 zeros K = 10% Unmarked (Commercial 1210 M = 20% Grade) 1812 AUTO = 7 Reel (Automotive Grade) AUTO 7411 = 13 Reel/Punched Paper (Automotive Grade) AUTO 7210 = 13 Reel/ Embossed Plastic (Automotive Grade) 1 Flexible termination option is available. Please see FT-CAP product bulletin C1013 X8R FT-CAP SMD 2 Additional termination finish options may be available. Contact KEMET for details. 2,3 SnPb termination finish option is not available on automotive grade product. 3 Additional reeling or packaging options may be available. Contact KEMET for details. 3 Reeling tape options (Paper or Plastic) are dependent on capacitor case size (Lx W) and thickness dimension. See Chip Thickness/Packaging Quantities and Tape & Reel Packaging Information sections of this document. 3 For additional Information regarding AUTO C-Spec options, see Automotive C-Spec Information section of this document. 3 The terms Marked and Unmarked pertain to laser marking option of components. One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com C1007 X8R ULTRA 150C SMD 12/9/2014 1Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Temperature 150C Ultra-Stable X8R Dielectric, 25 100 VDC (Commercial & Automotive Grade) Automotive C-Spec Information KEMET Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AECQ200, Stress Test Qualifi cation for Passive Components. These products are supported by a Product Change Notifi cation (PCN) and Production Part Approval Process warrant (PPAP). Automotive products offered through our distribution channel have been assigned an inclusive ordering code C-Spec,AUT. This C-Spec was developed in order to better serve small and medium sized companies that prefer an automotive grade component without the requirement to submit a customer Source Controlled Drawing (SCD) or specifi cation for review by a KEMET engineering specialist. This C-Spec is therefore not intended for use by KEMETs OEM Automotive customers and are not granted the same privileges as other automotive C-Specs. Customer PCN approval and PPAP request levels are limited (see details below). Product Change Notifi cation (PCN) The KEMET Product Change Notifi cation system is used to communicate primarily the following types of changes: Product/process changes that affect product form, fi t , function, and /or reliability Changes in manufacturing site Product obsolescence Customer Not ification due to: KEMET Automotive Days prior to C-Spec implementation Process/Product change Obsolescence* 1 KEMET assigned Yes (with approval and Yes 180 days Minimum sign off) AUTO Yes (without approval) Yes 90 days Minimum 1 KEMET assigned C-Specs require the submittal of a customer SCD or customer speci fication for review. For additional information contact KEMET. Production Part Approval Process (PPAP) The purpose of the Production Part Approval Process is: To ensure that supplier can meet the manufacturability and quality requirements for the purchased parts. To provide the evidence that all customer engineering design record and spec ification requirements are properly understood and fu lfilled by the manufacturing organization. To demonstrate that the established manufacturing process has the potential to produce the part KEMET PPAP (Product Part Approval Process) Level Automotive 1 2 3 4 5 C-Spec KEMET 1 assigned AUTO 1 KEMET assigned C-Specs require the submittal of a customer SCD or customer speci fication for review. For additional information contact KEMET. Part Number specifi c PPAP available Product family PPAP only KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com C1007 X8R ULTRA 150C SMD 12/9/2014 2