Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Floating Electrode Design (FE-CAP), X7R Dielectric, 6.3 250 VDC (Commercial & Automotive Grade) Overview KEMETs Floating Electrode (FE-CAP) multilayer ceramic Combined with the stability of an X7R dielectric, the FE-CAP capacitor in X7R dielectric utilizes a cascading internal electrode complements KEMETs Open Mode devices by providing a design configured to form multiple capacitors in series within a fail-safe design optimized for low to mid range capacitance single monolithic structure. This unique configuration results in values. These devices exhibit a predictable change in capacitance enhanced voltage and ESD performance over standard capacitor with respect to time and voltage and boast a minimal change in designs while allowing for a fail-open condition if mechanically capacitance with reference to ambient temperature. Capacitance damaged (cracked). If damaged, the device may experience change is limited to 15% from -55C to +125C. a drop in capacitance but a short is unlikely. The FE-CAP is designed to reduce the likelihood of a low IR or short circuit In addition to Commercial Grade, Automotive Grade devices condition and the chance for a catastrophic and potentially costly are available which meet the demanding Automotive Electronics failure event. Council s AECQ200 qualification requirements. Driven by the demand for a more robust and reliable component, the FE-CAP was designed for critical applications where higher operating temperatures and mechanical stress are a concern. These capacitors are manufactured in state of the art ISO/TS 16949:2009 certified facilities and are widely used in power supplies (input and output filters) and general electronic applications. Ordering Information C 0805 S 104 K 5 R A C TU Case Size Specification/ Capacitance Capacitance Failure Rate/ Packaging/Grade 1 Ceramic Voltage Dielectric Termination Finish 2 ( x ) Series Code (pF) Tolerance Design (C-Spec) 0402 S = Floating 2 Significant Digits + J = 5% 9 = 6.3 V R = X7R A = N/A C = 100% Matte Sn Blank = Bulk 0603 Electrode Number of Zeros K = 10% 8 = 10 V L = SnPb (5% TU = 7 Reel 0805 M = 20% 4 = 16 V minimum) Unmarked 1206 3 = 25 V TM = 7 Reel Marked 1210 5 = 50 V 1812 1 = 100 V 2 = 200 V A = 250 V 1 Additional termination finish options may be available. Contact KEMET for details. 1,2 SnPb termination finish option is not available on automotive grade product. 2 Additional reeling or packaging options may be available. Contact KEMET for details. One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com C1014 X7R FE-CAP SMD 6/6/2014 1Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Floating Electrode Design (FE-CAP), X7R Dielectric, 6.3 50 VDC (Commercial & Automotive Grade) Dimensions Millimeters (Inches) L W T B S EIA Metric S L W T B Mounting Size Size Separation Length Width Thickness Bandwidth Technique Code Code Minimum 0402 1005 1.00 (.040) 0.05 (.002) 0.50 (.020) 0.05 (.002) 0.30 (.012) 0.10 (.004) 0.30 (.012) Solder Reflow Only 0603 1608 1.60 (.063) 0.15 (.006) 0.80 (.032) 0.15 (.006) 0.35 (.014) 0.15 (.006) 0.70 (.028) Solder Wave or 0805 2012 2.00 (.079) 0.20 (.008) 1.25 (.049) 0.20 (.008) 0.50 (0.02) 0.25 (.010) 0.75 (.030) See Table 2 for Solder Reflow Thickness 1206 3216 3.20 (.126) 0.20 (.008) 1.60 (.063) 0.20 (.008) 0.50 (0.02) 0.25 (.010) 1210 3225 3.20 (.126) 0.20 (.008) 2.50 (.098) 0.20 (.008) 0.50 (0.02) 0.25 (.010) N/A Solder Reflow Only 1812 4532 4.50 (.177) 0.30 (.012) 3.20 (.126) 0.30 (.012) 0.60 (.024) 0.35 (.014) Benefits -55C to +125C operating temperature range Available capacitance tolerances of 5%, 10%, and 20% Floating Electrode/fail open design Commercial and Automotive (AECQ200) grades available Low to mid capacitance flex mitigation Non-polar device, minimizing installation concerns Lead (Pb)-Free, RoHS and REACH compliant 100% pure matte tin-plated termination finish allowing for EIA 0402, 0603, 0805, 1206, 1210, and 1812 case sizes excellent solderability DC voltage ratings of 6.3 V, 10 V, 16 V, 25 V, 50 V, 100 V, SnPb termination finish option available upon request (5% 200 V, and 250 V minimum) Capacitance offerings ranging from 150 pF to 0.22 F Applications Typical applications include circuits with a direct battery or power source connection, critical and safety relevant circuits without (integrated) current limitation and any application that is subject to high levels of board flexure or temperature cycling. Examples include raw power input side filtering (power plane/bus), high current applications (automobile battery line) and circuits that cannot be fused to open. Markets include consumer, medical, industrial (power supply), automotive, aerospace and telecom. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com C1014 X7R FE-CAP SMD 6/6/2014 2