Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Commercial Off-The-Shelf (COTS) for Higher Reliability Applications, C0G Dielectric, 10 250 VDC Overview KEMETs COTS program is an extension of KEMET knowledge of All COTS testing includes voltage conditioning and post- high reliability test regimes and requirements. KEMET regularly electrical testing as per MILPRF55681. For enhanced supplies up-screened products by working with customer reliability, KEMET also provides the following test level options drawings and imposing specified design and test requirements. and conformance certifications: The COTS program offers the same high quality and high Test Level A Test Level B Test Level C reliability components as up-screened products, but at a lower cost to the customer. This is accomplished by eliminating the Voltage Conditioning Voltage Conditioning Voltage Conditioning DWV DWV DWV need for customer-specific drawings to achieve the reliability IR 25C IR 25C IR 25C CAP CAP CAP level required for customer applications. A series of tests and DF DF DF inspections have been selected to provide the accelerated conditioning and 100% screening necessary to eliminate infant PDA 8% PDA 8% PDA 8% mortal failures from the population. C of C DPA DPA KEMETs C0G dielectric features a 125C maximum operating C of C 85/85 temperature and is considered stable. The Electronics Components, Assemblies & Materials Association (EIA) C of C characterizes C0G dielectric as a Class I material. Components of this classification are temperature compensating and are suited for resonant circuit applications or those where Q and stability of capacitance characteristics are required. C0G exhibits no change in capacitance with respect to time and voltage and boasts a negligible change in capacitance with reference to ambient temperature. Capacitance change is limited to 30 ppm/C from 55C to +125C. Ordering Information C 1206 T 104 K 5 G A C TU Rated Case Size Specification/ Capacitance Capacitance Termination Packaging/ Ceramic Voltage Dielectric Test Level 1 2 ( x ) Series Code (pF) Tolerance Finish Grade (C-Spec) (VDC) 0402 T = COTS Two significant B = 0.10 pF 8 = 10 G = C0G A = Testing per MIL- C = 100% See 0603 digits and C = 0.25 pF 4 = 16 PRF-55681 PDA 8% Matte SnPackaging 0805 number of zeros D = 0.5 pF 3 = 25 B = Testing per MIL- L = SnPb C-Spec 1206 Use 9 for F = 1% 6 = 35 PRF-55681 PDA 8%, DPA (5% Pb Ordering 1210 1.0 9.9 pF G = 2% 5 = 50 per EIA-469 minimum) Options 1812 Use 8 for J = 5% 1 = 100 C = Testing per MIL- Tabl 2220 0.5 .99 pF K = 10% 2 = 200 PRF-55681 PDA 8%, DPA e.g., 2.2 pF = 229 M = 20% A = 250 per EIA-469, Humidity per e.g., 0.5 pF = 508 MIL-STD-202, Method 103, Condition A 1 Additional capacitance tolerance offerings may be available. Contact KEMET for details. 2 Additional termination finish options may be available. Contact KEMET for details. Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1026 C0G COTS SMD 9/15/2020 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comSurface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Commercial Off-The-Shelf (COTS) for Higher Reliability Applications, C0G Dielectric, 10 250 VDC Packaging C-Spec Ordering Options Table Packaging/Grade 1 Packaging Type Ordering Code (C-Spec) Bulk Bag/Unmarked Not required (Blank) 7 Reel/Unmarked TU 7411 (EIA 0603 and smaller case sizes) 13 Reel/Unmarked 7210 (EIA 0805 and larger case sizes) 2 7 Reel/Unmarked/2 mm pitch 7081 2 13 Reel/Unmarked/2 mm pitch 7082 1 Default packaging is Bulk Bag. An ordering code C-Spec is not required for Bulk Bag packaging. 1 The terms Marked and Unmarked pertain to laser marking option of capacitors. All packaging options labeled as Unmarked will contain capacitors that have not been laser marked. The option to laser mark is not available on these devices. For more information see Capacitor Marking. 2 The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2 mm pitch option see Tape & Reel Packaging Information. Benefits 55C to +125C operating temperature range pF, 1%, 2%, 5%, 10%, and 20% Lead (Pb)-free, RoHS and REACH compliant Certificate of compliance Voltage conditioning and post-electrical testing per No piezoelectric noise MILPRF55681, Paragraph 4.8.3.1, Standard Voltage Extremely low ESR and ESL Conditioning High thermal stability Destructive Physical Analysis (DPA) per EIA469 High ripple current capability Humidity, steady state, low voltage (85/85) per Preferred capacitance solution at line frequencies and into MILSTD202, Method 103, Condition A the MHz range RoHS Compliant (excluding SnPb end metallization option) No capacitance change with respect to applied rated DC EIA 0402, 0603, 0805, 1206, 1210, 1812, and 2220 case voltage sizes Negligible capacitance change with respect to temperature DC voltage ratings of 10 V, 16 V, 25 V, 50 V, 100 V, 200 V No capacitance decay with time and 250 V Non-polar device, minimizing installation concerns Capacitance offerings ranging from 0.5 pF up to 0.47 F SnPb end metallization option available upon request Available capacitance tolerances of 0.10 pF, 0.25 pF, 0.5 (5% Pb minimum) Applications Typical applications include military, space quality and high reliability electronics. KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1026 C0G COTS SMD 9/15/2020 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com