Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
Flexible Termination System (FT-CAP) X7R Dielectric,
6.3 250 VDC (Commercial & Automotive Grade)
Overview
KEMETs Flexible Termination (FT-CAP) multilayer ceramic Combined with the stability of an X7R dielectric and designed to
capacitor in X7R dielectric incorporates a unique, flexible accommodate all capacitance requirements, these flex-robust
termination system that is integrated with KEMETs standard devices are RoHS-compliant, offer up to 5mm of flex-bend
termination materials. A conductive silver epoxy is utilized capability and exhibit a predictable change in capacitance with
between the base metal and nickel barrier layers of KEMETs respect to time and voltage. Capacitance change with reference to
standard termination system in order to establish pliability ambient temperature is limited to 15% from -55C to +125C.
while maintaining terminal strength, solderability and electrical
performance. This technology was developed in order to In addition to commercial grade, automotive grade devices are
address the primary failure mode of MLCCs flex cracks, which available which meet the demanding Automotive Electronics
are typically the result of excessive tensile and shear stresses Council's AECQ200 qualification requirements.
produced during board flexure and thermal cycling. Flexible
termination technology inhibits the transfer of board stress to the
rigid ceramic body, therefore mitigating flex cracks which can
result in low IR or short circuit failures.
Although this technology does not eliminate the potential
for mechanical damage that may propagate during extreme
environmental and handling conditions, it does provide superior
flex performance over standard termination systems.FT-CAP
complements KEMETs Open Mode, Floating Electrode (FE-
CAP), Floating Electrode with Flexible Termination (FF-CAP)
and KEMET Power Solutions (KPS) product lines by providing a
complete portfolio of flex mitigation solutions.
Ordering Information
C 1206 X 106 K 4 R A C AUTO
Case Size Specification/ Capacitance Capacitance Failure Rate/ Packaging/Grade
1
Ceramic Voltage Dielectric Termination Finish
2
( x ) Series Code (pF) Tolerance Design (C-Spec)
0603 X = Flexible 2 significant J = 5% 9 = 6.3 V R = X7R A = N/A C = 100% Matte Sn Blank = Bulk
0805 Termination digits + K = 10% 8 = 10 V L = SnPb (5% TU = 7" Reel Unmarked
1206 number of M = 20% 4 = 16 V minimum) TM = 7" Reel Marked
1210 zeros 3 = 25 V AUTO = Automotive
1808 5 = 50 V Grade 7" Reel Unmarked
1812 1 = 100 V
1825 2 = 200 V
2220 A = 250 V
2225
1
Additional termination finish options may be available. Contact KEMET for details.
1,2
SnPb termination finish option is not available on Automotive Grade product.
2
Additional reeling or packaging options may be available. Contact KEMET for details.
One world. One KEMET
KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com C1013_X7R_FT-CAP_SMD 5/28/2014 1Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
Flexible Termination System (FT-CAP), X7R Dielectric, 6.3 250 VDC (Commercial Grade & Automotive Grade)
Dimensions Millimeters (Inches)
L
W
T B
S
EIA Metric S
L W T B Mounting
Size Size Separation
Length Width Thickness Bandwidth Technique
Code Code Minimum
0603 1608 1.60 (.064) 0.17 (.007) 0.80 (.032) 0.15 (.006) 0.45 (.018) 0.15 (.006)
0.58 (.023)
Solder Wave
0805 2012 2.00 (.079) 0.20 (.008) 1.25 (.049) 0.20 (.008) 0.50 (0.02) 0.25 (.010) 0.75 (.030)
or
Solder Reflow
1206 3216 3.30 (.130) 0.40 (.016) 1.60 (.063) 0.20 (.008) 0.60 (.024) 0.25 (.010)
1
1210 3225 3.30 (.130) 0.40 (.016) 2.50 (.098) 0.20 (.008) 0.60 (.024) 0.25 (.010)
See Table 2 for
1808 4520 4.70 (.185) 0.50 (.020) 2.00 (.079) 0.20 (.008) 0.70 (.028) 0.35 (.014)
Thickness
1812 4532 4.50 (.178) 0.40 (.016) 3.20 (.126) 0.30 (.012) 0.70 (.028) 0.35 (.014) N/A
Solder Reflow
Only
1825 4564 4.60 (.181) 0.40 (.016) 6.40 (.252) 0.40 (.016) 0.70 (.028) 0.35 (.014)
2220 5650 5.90 (.232) 0.75 (.030) 5.00 (.197) 0.40 (.016) 0.70 (.028) 0.35 (.014)
2225 5664 5.90 (.232) 0.75 (.030) 6.40 (.248) 0.40 (.016) 0.70 (.028) 0.35 (.014)
1
For capacitance values 12 F add 0.02 (0.001) to the width tolerance dimension
Benefits
-55C to +125C operating temperature range Capacitance offerings ranging from 180 pF to 22 F
Superior flex performance (up to 5 mm) Available capacitance tolerances of 5%, 10%, and 20%
High capacitance flex mitigation Non-polar device, minimizing installation concerns
Pb-Free and RoHS Compliant 100% pure matte tin-plated termination finish allowing for
EIA 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220, and excellent solderability
2225 case sizes SnPb termination finish option available upon request (5% min)
DC voltage ratings of 6.3 V, 10 V, 16 V, 25 V, 50 V, 100 V, Commercial and Automotive (AECQ200) grades available
200 V, and 250 V
KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com C1013_X7R_FT-CAP_SMD 5/28/2014 2