Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
Flexible Termination System (FT-CAP), X7R Dielectric,
6.3 250 VDC (Commercial Grade)
Overview
The KEMET Flexible Termination (FT-CAP) multilayer (KPS) product lines by providing a complete portfolio of flex
ceramic capacitor in X7R dielectric incorporates a unique, mitigation solutions.
flexible termination system that is integrated with the
KEMET standard termination materials. A conductive silver Combined with the stability of an X7R dielectric and designed
epoxy is utilized between the base metal and nickel barrier to accommodate all capacitance requirements, these flex-
layers of KEMETs standard termination system in order robust devices are RoHS-compliant, offer up to 5 mm of
to establish pliability, while maintaining terminal strength, flex-bend capability and exhibit a predictable change in
solderability and electrical performance. This technology capacitance with respect to time and voltage. Capacitance
was developed in order to address the primary failure change with reference to ambient temperature is limited to
mode of MLCCs flex cracks, which are typically the result 15% from 55C to +125C.
of excessive tensile and shear stresses produced during
board flexure and thermal cycling. Flexible termination In addition to commercial grade, automotive grade devices
technology inhibits the transfer of board stress to the rigid are available which meet the demanding Automotive
ceramic body, therefore mitigating flex cracks which can Electronics Council's AECQ200 qualification requirements.
result in low IR or short circuit failures.
Although this technology does not eliminate the potential
for mechanical damage that may propagate during extreme
environmental and handling conditions, it does provide
superior flex performance over standard termination
systems. FT-CAP complements the KEMET Open Mode,
Floating Electrode (FE-CAP), Floating Electrode with
Flexible Termination (FF-CAP) and KEMET Power Solutions
Ordering Information
C 1206 X 106 K 4 R A C TU
Rated Failure
Case Size Specification/ Capacitance Capacitance Packaging/Grade
1
Ceramic Voltage Dielectric Rate/ Termination Finish
2
( x ) Series Code (pF) Tolerance (C-Spec)
(VDC) Design
0603 X = Flexible Two J = 5% 9 = 6.3 R = X7R A = N/A C = 100% Matte Sn SeePackaging
0805 termination significant K = 10% 8 = 10 L = SnPb (5% Pb minimum) C-Spec
1206 digits and M = 20% 4 = 16 Ordering
1210 number of 3 = 25 Options Tabl
1808 zeros 5 = 50
1812 1 = 100
1825 2 = 200
2220 A = 250
2225
1
Additional termination finish options may be available. Contact KEMET for details.
One world. One KEMET
KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1013_X7R_FT-CAP_SMD 6/15/2020 1
Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comSurface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
Flexible Termination System (FT-CAP), X7R Dielectric, 6.3 250 VDC (Commercial Grade)
Packaging C-Spec Ordering Options Table
Packaging/Grade
1
Packaging Type
Ordering Code (C-Spec)
Bulk Bag/Unmarked Not required (Blank)
7" Reel/Unmarked TU
7411 (EIA 0603 and smaller case sizes)
13" Reel/Unmarked
7210 (EIA 0805 and larger case sizes)
7" Reel/Marked TM
7040 (EIA 0603)
13" Reel/Marked
7215 (EIA 0805 and larger case sizes)
2
7" Reel/Unmarked/2 mm pitch 7081
2
13" Reel/Unmarked/2 mm pitch 7082
1
Default packaging isBulk Bag An ordering code C-Spec is not required forBulk Ba packaging.
1
The termsMarke andUnmarke pertain to laser marking option of capacitors. All packaging options labeled asUnmarke will contain
capacitors that have not been laser marked. Please contact KEMET if you require a laser marked option. For more information seeCapacitor Marking
2
The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case
size devices. For more information regarding 2 mm pitch option seeTape & Reel Packaging Information
Benefits
55C to +125C operating temperature range Capacitance offerings ranging from 180 pF to 22 F
Superior flex performance (up to 5 mm) Available capacitance tolerances of 5%, 10%, and 20%
High capacitance flex mitigation Automotive (AEC-Q200) grade available
Lead (Pb)-free, RoHS and REACH compliant Non-polar device, minimizing installation concerns
EIA 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220, and 100% pure matte tin-plated termination finish allowing for
2225 case sizes excellent solderability
DC voltage ratings of 6.3 V, 10 V, 16 V, 25 V, 50 V, 100 V, SnPb termination finish option available upon request
200 V, and 250 V (5% Pb minimum)
Applications
Typical applications include circuits with a direct battery or power source connection, critical and safety relevant circuits
without (integrated) current limitation and any application that is subject to high levels of board flexure or temperature
cycling. Examples include raw power input side filtering (power plane/bus), high current applications (automobile battery
line) and circuits that cannot be fused to open. Markets include consumer, medical, industrial (power supply), automotive,
aerospace and telecom.
KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1013_X7R_FT-CAP_SMD 6/15/2020 2
Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com