Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Temperature 150C, X8L Dielectric, 10 50 VDC (Commercial & Automotive Grade) Overview KEMETs X8L dielectric features a 150C maximum These devices are available with KEMET s Flexible operating temperature and is considered general termination technology which inhibits the transfer of board purpose high temperature. These components are stress to the rigid ceramic body, therefore mitigating flex fixed, ceramic dielectric capacitors suited for high cracks which can result in low IR or short circuit failures. temperature bypass and decoupling applications or Although flexible termination technology does not eliminate frequency discriminating circuits where Q and stability of the potential for mechanical damage that may propagate capacitance characteristics are not critical. X8L exhibits a during extreme environmental and handling conditions, predictable change in capacitance with respect to time and it does provide superior flex performance over standard voltage and boasts a minimal change in capacitance with termination systems. reference to ambient temperature up to 125C. Beyond 125C X8L displays a wider variation in capacitance. In addition to commercial grade, automotive grade Capacitance change is limited to 15% from 55C to devices are available and meet the demanding Automotive +125C and +15, 40% from 125C to 150C. Electronics Council s AECQ200 qualification requirements. Driven by the demand for a more robust and reliable component, X8L dielectric capacitors were developed for critical applications where reliability at higher operating temperatures are a concern. These capacitors are widely used in automotive circuits as well as general high temperature applications. Concerned with flex cracks resulting from excessive tensile and shear stresses produced during board flexure and thermal cycling Ordering Information C 1210 X 106 K 8 N A C TU Rated Failure Case Size Specification/ Capacitance Capacitance Packaging/Grade 2 Ceramic Voltage Dielectric Rate/ Termination Finish 1 ( x ) Series Code (pF) Tolerance (C-Spec) (VDC) Design 0402 C = Standard Two J = 5% 8 = 10 N = X8L A = N/A C = 100% Matte Sn SeePackaging 0603 X = Flexible significant K = 10% 4 = 16 L = SnPb (5% Pb minimum) C-Spec Ordering 0805 Termination digits + M = 20% 3 = 25 Options Tabl 1206 number of 5 = 50 below 1210 zeros 1 The flexible termination option is not available on EIA 0402 case size product. must be used in the 6th character position when ordering this case size. 2 Additional termination finish options may be available. Contact KEMET for details. 2 SnPb termination finish option is not available on Automotive Grade product. One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.com C1008 X8L 150C SMD 3/21/2017 1Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Temperature 150C, X8L Dielectric, 10 50 VDC (Commercial & Automotive Grade) Packaging C-Spec Ordering Options Table Packaging/Grade Packaging Type Ordering Code (C-Spec) 1 Commercial Grade Bulk Bag Not Required (Blank) 7 Reel/Unmarked TU 7411 (EIA 0603 and smaller case sizes) 13 Reel/Unmarked 7210 (EIA 0805 and larger case sizes) 7 Reel/Marked TM 7040 (EIA 0603 and smaller case sizes) 13 Reel/Marked 7215 (EIA 0805 and larger case sizes) 2 7 Reel/Unmarked/2 mm pitch 7081 2 13 Reel/Unmarked/2 mm pitch 7082 3 Automotive Grade 7 Reel AUTO AUTO7411 (EIA 0603 and smaller case sizes) 13 Reel/Unmarked AUTO7210 (EIA 0805 and larger case sizes) 2 7 Reel/Unmarked/2 mm pitch 3190 2 13 Reel/Unmarked/2 mm pitch 3191 1 Default packaging isBulk Ba. An ordering code C-Spec is not required forBulk Ba packaging. 1 The termsMarke andUnmarke pertain to laser marking option of capacitors. All packaging options labeled asUnmarke will contain capacitors that have not been laser marked. 2 The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2 mm pitch option seeTape & Reel Packaging Informatio. 3 Reeling tape options (Paper or Plastic) are dependent on capacitor case size ( x ) and thickness dimension. SeeChip Thickness/Tape & Reel Packaging Quantitie andTape & Reel Packaging Informatio. 3 For additional Information regardingAUT C-Spec options, seeAutomotive C-Spec Informatio. 3 All Automotive packaging C-Specs listed exclude the option to laser mark components. Please contact KEMET if you require a laser marked option. For more information seeCapacitor Markin. Benefits 55C to +150C operating temperature range Non-polar device, minimizing installation concerns Lead (Pb)-free, RoHS and REACH compliant 100% pure matte tin-plated termination finish allowing for EIA 0402, 0603, 0805, 1206, and 1210 case sizes excellent solderability DC voltage ratings of 10 V, 16 V, 25 V, and 50 V SnPb termination finish option available upon request Capacitance offerings ranging from 0.012 F to 10 F (5% Pb minimum) Available capacitance tolerances of 5%, 10%, and 20% Flexible termination option available upon request Commercial & Automotive (AECQ200) grades available Applications Typical applications include use in extreme environments such as down-hole oil exploration, under-hood automotive, military and aerospace. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.com C1008 X8L 150C SMD 3/21/2017 2