Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Flexible Termination System (FT-CAP) X7R Dielectric, 6.3 250 VDC (Automotive Grade) Overview KEMETs Automotive Grade Flexible Termination (FT-CAP) Combined with the stability of an X7R dielectric and designed multilayer ceramic capacitor in X7R dielectric incorporates to accommodate all capacitance requirements, these flex- a unique, flexible termination system that is integrated with robust devices are RoHS-compliant, offer up to 5mm of KEMETs standard termination materials. A conductive silver flex-bend capability and exhibit a predictable change in epoxy is utilized between the base metal and nickel barrier capacitance with respect to time and voltage. Capacitance layers of KEMETs standard termination system in order change with reference to ambient temperature is limited to to establish pliability while maintaining terminal strength, 15% from 55C to +125C. solderability and electrical performance. This technology was developed in order to address the primary failure mode Whether under-hood or in-cabin, these capacitors are designed of MLCCs flex cracks, which are typically the result of to provide reliable performance in mission and safety excessive tensile and shear stresses produced during board critical automotive circuits. Stricter testing protocol and flexure and thermal cycling. Flexible termination technology inspection criteria have been established for automotive grade inhibits the transfer of board stress to the rigid ceramic body, products in recognition of potentially harsh environmental therefore mitigating flex cracks which can result in low IR or conditions. KEMET automotive grade series capacitors meet short circuit failures. the demanding Automotive Electronics Council s AEC-Q200 qualification requirements. Although this technology does not eliminate the potential for mechanical damage that may propagate during extreme environmental and handling conditions, it does provide superior flex performance over standard termination systems. FT-CAP complements KEMETs Open Mode, Floating Electrode (FE-CAP), Floating Electrode with Flexible Termination (FF-CAP) and KEMET Power Solutions (KPS) product lines by providing a complete portfolio of flex mitigation solutions. Ordering Information C 1206 X 106 K 4 R A C AUTO Case Size Specification/ Capacitance Capacitance Rated Voltage Failure Rate/ Termination Packaging/ Ceramic Dielectric 1 2 ( x ) Series Code (pF) Tolerance (VDC) Design Finish Grade (C-Spec) 0603 X = Flexible Two J = 5% 9 = 6.3 R = X7R A = N/A C = 100% Matte Sn See 0805 Termination significant K = 10% 8 = 10Packaging 1206 digits and M = 20% 4 = 16 C-Spec 1210 number of 3 = 25 Ordering 1808 zeros 5 = 50 Options 1812 1 = 100 Tabl below 1825 2 = 200 2220 A = 250 2225 1 Additional termination finish options may be available. Contact KEMET for details. One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.com C1078 X7R FT-CAP AUTO SMD 10/24/2017 1Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Flexible Termination System (FT-CAP), X7R Dielectric, 6.3 250 VDC (Automotive Grade) Packaging C-Spec Ordering Options Table Packaging/Grade 1 Packaging Type 3 Ordering Code (C-Spec) 7 Reel AUTO AUTO7411 (EIA 0603 and smaller case sizes) 13 Reel/Unmarked AUTO7210 (EIA 0805 and larger case sizes) 2 7 Reel/Unmarked/2 mm pitch 3190 2 13 Reel/Unmarked/2 mm pitch 3191 1 Reeling tape options (Paper or Plastic) are dependent on capacitor case size ( x ) and thickness dimension. SeeChip Thickness/Tape & Reel Packaging Quantitie andTape & Reel Packaging Informatio. 2 The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2 mm pitch option seeTape & Reel Packaging Informatio. 3 All Automotive packaging C-Specs listed exclude the option to laser mark components. Please contact KEMET if you require a laser marked option. For more information seeCapacitor Markin. 3 For additional Information regardingAUT C-Spec options, seeAutomotive C-Spec Informatio. Benefits AEC-Q200 automotive qualified DC voltage ratings of 6.3 V, 10 V, 16 V, 25 V, 50 V, 100 V, 55C to +125C operating temperature range 200 V, and 250 V Superior flex performance (up to 5 mm) Capacitance offerings ranging from 180 pF to 22 F High capacitance flex mitigation Available capacitance tolerances of 5%, 10% and 20% Lead (Pb)-free, RoHS and REACH compliant Non-polar device, minimizing installation concerns EIA 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220, and 100% pure matte tin-plated termination finish allowing for 2225 case sizes excellent solderability Applications Typical applications include circuits with a direct battery or power source connection, critical and safety relevant circuits without (integrated) current limitation and any application that is subject to high levels of board flexure or temperature cycling. Examples include raw power input side filtering (power plane/bus), high current applications (automobile battery line) and circuits that cannot be fused to open. Markets include consumer, medical, industrial (power supply), automotive, aerospace and telecom. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.com C1078 X7R FT-CAP AUTO SMD 10/24/2017 2