Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Temperature 200C, C0G Dielectric, 10 200 VDC (Industrial Grade) Overview KEMETs High Temperature surface mount C0G Multilayer temperatures up to 200C. They also exhibit low ESR at Ceramic Capacitors (MLCCs) are constructed of a robust and high frequencies and offer greater volumetric efficiency over proprietary C0G/NP0 base metal electrode (BME) dielectric competitive high temperature precious metal electrode (PME) and system that offers industry-leading performance at extreme BME ceramic capacitor devices. temperatures up to 200C. These devices are specifically designed to withstand the demands of harsh industrial These devices are Lead (Pb)-Free, RoHS and REACH compliant environments such as down-hole oil exploration and automotive/ without the need of any exemptions. avionics engine compartment circuitry. KEMETs High Temperature C0G capacitors are temperature compensating and are well suited for resonant circuit applications or those where Q and stability of capacitance characteristics are required. They exhibit no change in capacitance with respect to time and voltage and boast a negligible change in capacitance with reference to ambient temperature. Capacitance change is limited to 30ppm/ C from 55C to +200C. In addition, these capacitors exhibit high insulation resistance with low dissipation factor at elevated Ordering Information C 1210 H 124 J 5 G A C TU Case Size Specicfi ation/ Capacitance Capacitance Failure Rate/ Packaging/Grade 2 Ceramic Voltage Dielectric Termination Finish 1 ( x ) Series Code (pF) Tolerance Design (C-Spec) 0402 H = High Two significant digits B = 0.10 pF 8 = 10 V G = C0G A = N/A C = 100% Matte Sn See Packaging 0603 Temperature + number of zeros. C = 0.25 pF 4 = 16 V L = SnPb (5% Pb C-Spec Ordering 0805 (200C) Use 9 for 1.0 9.9 pF D = 0.5 pF 3 = 25 V minimum) Options Table 1206 Use 8 for 0.5 .99 pF F = 1% 5 = 50 V E = Gold (Au) 1.97 below 1210 e.g., 2.2 pF = 229 G = 2% 1 = 100 V 11.8 in 1812 e.g., 0.5 pF = 508 J = 5% 2 = 200 V F = Gold (Au) 30 50 2220 K = 10% in M = 20% G = Gold (Au) 100 in minimum 1 Additional capacitance tolerance offerings may be available. Contact KEMET for details. 2 Additional termination finish options may be available. Contact KEMET for details. One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com C1001 C0G 200C SMD 3/24/2016 1Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Temperature (200C), C0G Dielectric, 10 200 VDC (Industrial Grade) Packaging C-Spec Ordering Options Table Packaging Termination Finish Options Packaging Type/Options Ordering Code (C-Spec) 3 Standard Packaging Unmarked 1 Bulk Bag Blank 2 Waffle Tray 7292 7 Tape & Reel TU 7411 (EIA 0603 and smaller case sizes) 13 Reel 7210 (EIA 0805 and larger case sizes) C = 100% Matte Sn 4 L = SnPb (5% Pb min.) 7 Tape & Reel/2 mm pitch 7081 F = Gold (Au) 30 50 in 7 Tape & Reel 50 pieces T050 G = Gold (Au) 100 in minimum 7 Tape & Reel 100 pieces T100 7 Tape & Reel 250 pieces T250 7 Tape & Reel 500 pieces T500 7 Tape & Reel 1,000 pieces T1K0 5 3 Moisture Sensitive Packaging Unmarked 2 Waffle Tray 7282 7 Tape & Reel 7130 7 Tape & Reel 50 pieces E = Gold (Au) 1.97 11.8 in F = Gold (Au) 30 50 in 7 Tape & Reel 100 pieces G = Gold (Au) 100 in minimum 6 7 Tape & Reel 250 pieces Contact KEMET 7 Tape & Reel 500 pieces 7 Tape & Reel 1,000 pieces 1 Default packaging is Bulk Bag. An ordering code C-Spec is not required for Bulk Bag packaging. 1 Bulk Bag packaging option is not available for Gold (Au) termination finish options and case sizes larger than 2225 (5664 Metric). 2 Waffle Tray packaging option is not available for case sizes larger than 2225 (5664 Metric). 3 The terms Marked and Unmarked pertain to laser marking option of components. All packaging options labeled as Unmarked will contain capacitors that have not been laser marked. The option to laser mark is not available on these devices. 3 Reeling quantities are dependent upon chip size and thickness dimension. When ordering using the T1K0 packaging option, 1812 thru 2225 case size devices with chip thickness of 1.9 mm (nominal) may be shipped on multiple 7 reels or a single 13 reel. Additional reeling or packaging options may be available. Contact KEMET for details. 4 The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2 mm pitch option see Tape & Reel Packaging Information. 5 Moisture sensitive packaging is required for Gold (Au) termination option E (1.97 11.8 in) 6 Additional reeling or packaging options may be available. Contact KEMET for details. Benefits 55C to +200C operating temperature range Preferred capacitance solution at line frequencies and into the Lead (Pb)-Free, RoHS and REACH compliant MHz range EIA 0402, 0603, 0805, 1206, 1210, 1812, and 2220 case sizes No capacitance change with respect to applied rated DC voltage DC voltage ratings of 10 V, 16 V, 25 V, 50 V, 100 V, and 200 V Negligible capacitance change with respect to temperature from Capacitance offerings ranging from 0.5 pF up to 470 nF 55C to +200C Available capacitance tolerances of 0.10 pF, 0.25 pF, No capacitance decay with time 0.5 pF, 1%, 2%, 5%, 10% or 20% Non-polar device, minimizing installation concerns No piezoelectric noise 100% pure matte tin-plated termination finish allowing for Extremely low ESR and ESL excellent solderability High thermal stability Gold (Au), Tin/Lead (Sn/Pb) and 100% pure matte Tin (Sn) High ripple current capability termination finishes available KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com C1001 C0G 200C SMD 3/24/2016 2