Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Floating Electrode Design (FE-CAP), X7R Dielectric, 6.3 250 VDC (Commercial & Automotive Grade) Overview KEMETs Floating Electrode (FE-CAP) multilayer ceramic Combined with the stability of an X7R dielectric, the FE-CAP capacitor in X7R dielectric utilizes a cascading internal complements KEMETs Open Mode devices by providing a electrode design configured to form multiple capacitors fail-safe design optimized for low to mid range capacitance in series within a single monolithic structure. This values. These devices exhibit a predictable change in unique configuration results in enhanced voltage and capacitance with respect to time and voltage and boast a ESD performance over standard capacitor designs while minimal change in capacitance with reference to ambient allowing for a fail-open condition if mechanically damaged temperature. Capacitance change is limited to 15% from (cracked). If damaged, the device may experience a drop in 55C to +125C. capacitance but a short is unlikely. The FE-CAP is designed to reduce the likelihood of a low IR or short circuit condition In addition to Commercial Grade, Automotive Grade devices and the chance for a catastrophic and potentially costly are available which meet the demanding Automotive failure event. Electronics Council s AECQ200 qualification requirements. Driven by the demand for a more robust and reliable component, the FE-CAP was designed for critical applications where higher operating temperatures and mechanical stress are a concern. These capacitors are manufactured in state of the art ISO/TS 16949:2009 certified facilities and are widely used in power supplies (input and output filters) and general electronic applications. Ordering Information C 0805 S 104 K 5 R A C TU Rated Failure Case Size Specification/ Capacitance Capacitance Packaging/ 1 Ceramic Voltage Dielectric Rate/ Termination Finish ( x ) Series Code (pF) Tolerance Grade (C-Spec) (VDC) Design 0402 S = Floating Two J = 5% 9 = 6.3 R = X7R A = N/A C = 100% Matte Sn See 0603 Electrode significant K = 10% 8 = 10 L = SnPb (5% Pb minimum)Packaging 0805 digits and M = 20% 4 = 16 C-Spec 1206 number of 3 = 25 Ordering 1210 zeros 5 = 50 Options Tabl 1812 1 = 100 2 = 200 A = 250 1 Additional termination finish options may be available. Contact KEMET for details. 1 SnPb termination finish option is not available on automotive grade product. Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1014 X7R FE-CAP SMD 9/14/2020 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comSurface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Floating Electrode Design (FE-CAP), X7R Dielectric, 6.3 50 VDC (Commercial & Automotive Grade) Packaging C-Spec Ordering Options Table Packaging/Grade Packaging Type Ordering Code (C-Spec) 1 Commercial Grade Bulk Bag Not Required (Blank) 7 Reel/Unmarked TU 7411 (EIA 0603 and smaller case sizes) 13 Reel/Unmarked 7210 (EIA 0805 and larger case sizes) 7 Reel/Marked TM 7040 (EIA 0603) 13 Reel/Marked 7215 (EIA 0805 and larger case sizes) 2 7 Reel/Unmarked/2 mm pitch 7081 2 13 Reel/Unmarked/2 mm pitch 7082 3 Automotive Grade 7 Reel AUTO AUTO7411 (EIA 0603 and smaller case sizes) 13 Reel/Unmarked AUTO7210 (EIA 0805 and larger case sizes) 2 7 Reel/Unmarked/2 mm pitch 3190 2 13 Reel/Unmarked/2 mm pitch 3191 1 Default packaging isBulk Ba. An ordering code C-Spec is not required forBulk Ba packaging. 1 The termsMarke andUnmarke pertain to laser marking option of capacitors. All packaging options labeled asUnmarke will contain capacitors that have not been laser marked. 2 The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2 mm pitch option seeTape & Reel Packaging Informatio. 3 Reeling tape options (Paper or Plastic) are dependent on capacitor case size ( x ) and thickness dimension. SeeChip Thickness/Tape & Reel Packaging Quantitie andTape & Reel Packaging Informatio. 3 For additional Information regardingAUT C-Spec options, seeAutomotive C-Spec Informatio. 3 All Automotive packaging C-Specs listed exclude the option to laser mark components. Please contact KEMET if you require a laser marked option. For more information seeCapacitor Markin. Benefits 55C to +125C operating temperature range Available capacitance tolerances of 5%, 10%, and 20% Floating Electrode/fail open design Commercial and Automotive (AECQ200) grades available Low to mid capacitance flex mitigation Non-polar device, minimizing installation concerns Lead (Pb)-free, RoHS and REACH compliant 100% pure matte tin-plated termination finish allowing for EIA 0402, 0603, 0805, 1206, 1210, and 1812 case sizes excellent solderability DC voltage ratings of 6.3 V, 10 V, 16 V, 25 V, 50 V, 100 V, SnPb termination finish option available upon request 200 V, and 250 V (5% Pb minimum) Capacitance offerings ranging from 150 pF to 0.22 F Applications Typical applications include circuits with a direct battery or power source connection, critical and safety relevant circuits without (integrated) current limitation and any application that is subject to high levels of board flexure or temperature cycling. Examples include raw power input side filtering (power plane/bus), high current applications (automobile battery line) and circuits that cannot be fused to open. Markets include consumer, medical, industrial (power supply), automotive, aerospace and telecom. KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1014 X7R FE-CAP SMD 9/14/2020 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com