S ur fac e M oun t M ul tilaye r C e ramic Chip C apaci to r s (S M D M LC C s) High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 10,000 VDC (Commercial Grade) Overview KEME Ts High Voltage with Flexible Termination (HV F T- Flexible termination technology provides superior CAP) s ur face mount MLCCs in C0G dielectric addres s the flex per formance over standard termination sy stems. primar y failure mode of MLCCsflex cracks. T hese devices C0G (NP0) dielectric capacitors exhibit no change in utilize a pliable and conductive s ilver epoxy between the capacitance with respect to time and voltage and boasts a bas e metal and nickel barrier layers of the termination negligible change in capacitance with reference to ambient sy stem which inhibits the trans fer of board stres s to the temperature. Capacitance change is limited to 30ppm/ rigid ceramic body, therefore mitigating flex cracks which C from 55C to +125 C. T hese devices exhibit low ESR can result in low IR or shor t circuit failures. at high frequencies and find conventional use as snubbers or filters in applications s uch as s witching power supplies and lighting ballasts. Benefits O p e r a ti n g te m p e r a t u r e r a n g e of 5 5 C to +125 C S u p e r i o r fl e x p e r fo r ma n c e (u p to 5 m m) Capacitance offerings ranging from 1 pF to 120 nF DC voltage ratings of 500 V, 630 V, 1 KV, 1.5 KV, 2 KV, 2.5 KV, 3 KV and 10KV EIA 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220 and 2225 E x tr e m e l y l ow E S R a n d E S L H i g h r i p p l e c u r r e n t c a pa b ili t y No capacitance shift with voltage Negligible capacitance shift with respect to temperature No piezoelectric noise L ea d ( P b) - Fr e e , R o H S a n d R E AC H c o m p lia n t Applications H i g h fr e q u e n c y p owe r c o nve r te r s W i d e ba n d ga p ( W B G), sili c o n c a r b i d e (S i C) a n d galliu m ni tr i d e (Ga N ) sys te ms S n u b b e r ( hi g h d V/d T ) R es o na n t c i r c u i t s ( L LC , W i r e l es s C ha r g i n g , e tc) Timing Filtering One world. One KEMET KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1070 C0G HV FT-CAP SMD 7/16/2020 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comSurface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage with Flexible Termination System (HV FT-CAP), C0G Dielectric, 500 10,000 VDC (Commercial Grade) Ordering Information C 2225 X 393 J C G A C TU Rated Failure Capacitance Case Size Specicafi tion/ Capacitance Packaging/Grade 2 Ceramic Voltage Dielectric Rate/ Termination Finish 1 ( x ) Series Code (pF) Tolerance (C-Spec) (VDC) Design 0603 X = F l e x i b l e Two signi fi can t B = 0.10 pF C = 500 G = A = C = 100% Matte Sn See 0805 Termination digits and C = 0.25 pF B = 630 C0G N/A L = S n P b (5 % P b m i n i m u m) Packaging 1206 number of D = 0.5 pF D = 1,000 C-Spec Ordering 1210 zeros. F = 1% F = 1,500 Options Table 1808 G = 2% G = 2,000 1812 J = 5% Z = 2,500 1825 K = 10% H = 3,000 2220 M = 20% K = 10,000 2225 1 Additional capacitance tolerance offerings may be available. Contact KEMET for details. 2 Additional termination finish options may be available. Contact KEMET for details. Packaging C-Spec Ordering Options Table Packaging/Grade 1 Packaging Type Ordering Code (C-Spec) 1 Commercial Grade Bulk Bag N o t r e q u i r e d ( B l a n k ) 7 R e e l / U n m a r ke d TU 7411 ( E I A 0 6 0 3 a n d s m a l l e r c a s e s i z e s) 13 R e e l / U n m a r ke d 7 2 10 ( E I A 0 8 0 5 a n d l a r g e r c a s e s i z e s) 2 7 R e e l / U n m a r ke d / 2 m m p i t c h 7081 2 13 R e e l / U n m a r ke d / 2 m m p i t c h 7082 3 Automotive Grade 7 R e e l AUTO A U T O 7411 ( E I A 0 6 0 3 a n d s m a l l e r c a s e s i z e s) 13 R e e l / U n m a r ke d A U T O 7 2 10 ( E I A 0 8 0 5 a n d l a r g e r c a s e s i z e s) 2 7 R e e l / U n m a r ke d / 2 m m p i t c h 3190 2 13 R e e l / U n m a r ke d / 2 m m p i t c h 3191 1 Default packaging is Bulk Bag. An ordering code C-Spec is not required for Bulk Bag packaging. 1 The terms Marked and Unmarked pertain to laser marking option of capacitors. All packaging options labeled as Unmarked will contain capacitors that have not been laser marked. The option to laser mark is not available on these devices. For more information see Capacitor Marking. 2 The 2mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2mm pitch option see Tape & Reel Packaging Information. 3 Reeling tape options (Paper or Plastic) are dependent on capacitor case size (L x W) and thickness dimension. See Chip Thickness/Tape & Reel Packaging Quantities and Tape & Reel Packaging Information. 3 For additional Information regarding AUTO C-Spec options, see Automotive C-Spec Information. 3 All Automotive packaging C-Specs listed exclude the option to laser mark components. The option to laser mark is not available on these devices. For more information see Capacitor Marking. KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1070 C0G HV FT-CAP SMD 7/16/2020 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com