Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) KPS, SnPb Termination, X7R Dielectric, 10 250 VDC (Commercial Grade) Overview KEMET Power Solutions (KPS) Commercial with Tin/ termination system. As the bulk of the electronics industry Lead Termination stacked capacitors utilize a proprietary moves towards RoHS compliance, KEMET continues to lead-frame technology to vertically stack one or two provide tin/lead terminated products for military, aerospace multilayer ceramic chip capacitors into a single compact and industrial applications and will ensure customers have a surface mount package. The attached lead-frame stable and long-term source of supply. These devices provide mechanically isolates the capacitor s from the printed lower ESR, ESL and higher ripple current capability when circuit board, therefore offering advanced mechanical compared to other dielectric solutions. and thermal stress performance. Isolation also addresses concerns for audible, microphonic noise that may occur Combined with the stability of an X7R dielectric, KEMETs when a bias voltage is applied. A two chip stack offers KPS devices exhibit a predictable change in capacitance up to double the capacitance in the same or smaller with respect to time and voltage and boast a minimal change design footprint when compared to traditional surface in capacitance with reference to ambient temperature. mount MLCC devices. Providing up to 10 mm of board Capacitance change is limited to 15% from 55C to flex capability, KEMETs tin/lead electroplating process is +125C. designed to meet a 5% minimum lead content and address concerns for a more robust and reliable lead containing Benefits Operating temperature range of 55C to +125C Reliable and robust termination system EIA 1210 and 2220 case sizes DC voltage ratings of 10 V, 16 V, 25 V, 50 V, 63 V, 100 V and 250 V Capacitance offerings ranging from 0.1 up to 47 F Ordering Information C 2220 C 106 M 5 R 2 L 7186 Rated Packaging/ Case Size Specification/ Capacitance Capacitance Failure Rate/ Leadframe Ceramic Voltage Dielectric Grade 1 2 ( x ) Series Code (pF) Tolerance Design Finish (VDC) (C-Spec) 1210 C = Standard Two K = 10% 8 = 10 R = X7R 1 = KPS Single Chip Stack L = SnPb See 2220 Significant M = 20% 4 = 16 2 = KPS Double Chip Stack (5% Pb min.)Packaging Digits and 3 = 25 C-Spec Number of 5 = 50 Ordering Zeroes M = 63 Options Tabl 1 = 100 A = 250 1 Double chip stacks 2 in the 13th character position of the ordering code) are only available in M (20%) capacitance tolerance. Single chip stacks 1 in the 13th character position of the ordering code) are available in K (10%) or M (20%) tolerances. 2 Additional leadframe finish options may be available. Contact KEMET for details. Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1089 X7R KPS SnPb 11/22/2021 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comSurface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) KPS, SnPb Termination, X7R Dielectric, 10 250VDC (Commercial Grade) Packaging C-Spec Ordering Options Table Packaging/Grade 1 Packaging Type Ordering Code (C-Spec) 7 Reel (Embossed Plastic Tape)/Unmarked 7186 13 Reel (Embossed Plastic Tape)/Unmarked 7289 1 The termsMarke andUnmarke pertain to laser marking option of capacitors. All packaging options labeled asUnmarke will contain capacitors that have not been laser marked. The option to laser mark is not available on these devices. For more information seeCapacitor Marking Benefits cont. Available capacitance tolerances of 10% and 20% Higher capacitance in the same footprint Potential board space savings Advanced protection against thermal and mechanical stress Provides up to 10mm of board flex capability Reduces audible, microphonic noise Extremely low ESR and ESL SnPb plated termination finish (5% Pb minimum) Non-polar device, minimizing installation concerns Tantalum and electrolytic alternative Applications Typical applications include smoothing circuits, DC/DC converters, power supplies (input/output filters), noise reduction (piezoelectric/mechanical), circuits with a direct battery or power source connection, critical and safety relevant circuits without (integrated) current limitation, and any application that is subject to high levels of board flexure or temperature cycling. Markets include industrial, aerospace, automotive and telecommunications. KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1089 X7R KPS SnPb 11/22/20212 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com