Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Temperature 150C, X8L Dielectric, 10 50 VDC (Commercial & Automotive Grade) Overview KEMETs X8L dielectric features a 150C maximum operating which can result in low IR or short circuit failures. Although temperature and is considered general purpose high flexible termination technology does not eliminate the potential temperature. These components are fixed, ceramic dielectric for mechanical damage that may propagate during extreme capacitors suited for high temperature bypass and decoupling environmental and handling conditions, it does provide superior applications or frequency discriminating circuits where Q and flex performance over standard termination systems. stability of capacitance characteristics are not critical. X8L exhibits a predictable change in capacitance with respect to time In addition to commercial grade, automotive grade devices and voltage and boasts a minimal change in capacitance with are available and meet the demanding Automotive Electronics reference to ambient temperature up to 125C. Beyond 125C Council s AECQ200 qualification requirements. X8L displays a wider variation in capacitance. Capacitance change is limited to 15% from -55C to +125C and +15, -40% from 125C to 150C. Driven by the demand for a more robust and reliable component, X8L dielectric capacitors were developed for critical applications where reliability at higher operating temperatures are a concern. These capacitors are widely used in automotive circuits as well as general high temperature applications. Concerned with flex cracks resulting from excessive tensile and shear stresses produced during board flexure and thermal cycling These devices are available with KEMET s Flexible termination technology which inhibits the transfer of board stress to the rigid ceramic body, therefore mitigating flex cracks Ordering Information C 1210 X 106 K 8 N A C TU Case Size Specification/ Capacitance Capacitance Failure Rate/ Packaging/Grade 2 Ceramic Voltage Dielectric Termination Finish 1 3 ( x ) Series Code (pF) Tolerance Design (C-Spec) 0402 C = Standard 2 Significant J = 5% 8 = 10 V N = X8L A = N/A C = 100% Matte Sn Blank = Bulk 0603 X = Flexible Digits + Number K = 10% 3 = 25 V L = SnPb (5% TU = 7 Reel 0805 Termination of Zeros M = 20% 5 = 50 V minimum) Unmarked 1206 TM = 7 Reel Marked 1210 AUTO = Automotive Grade 7 Reel Unmarked 1 The flexible termination option is not available on EIA 0402 case size product. must be used in the 6th character position when ordering this case size. 2 Additional termination finish options may be available. Contact KEMET for details. 2, 3 SnPb termination finish option is not available on Automotive Grade product. 3 Additional reeling or packaging options may be available. Contact KEMET for details. One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com C1008 X8L 150C SMD 6/6/2014 1Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Temperature 150C, X8L Dielectric, 10 50 VDC (Commercial & Automotive Grade) Dimensions Standard Termination Millimeters (Inches) L W T B S EIA Metric S L W T B Mounting Size Size Separation Length Width Thickness Bandwidth Technique Code Code Minimum 0402 1005 1.00 (.040) 0.05 (.002) 0.50 (.020) 0.05 (.002) 0.30 (.012) 0.10 (.004) 0.30 (.012) Solder Reflow Only 0603 1608 1.60 (.063) 0.15 (.006) 0.80 (.032) 0.15 (.006) 0.35 (.014) 0.15 (.006) 0.70 (.028) See Table 2 for Solder Wave or 0805 2012 2.00 (.079) 0.20 (.008) 1.25 (.049) 0.20 (.008) 0.50 (0.02) 0.25 (.010) 0.75 (.030) Thickness Solder Reflow 1206 3216 3.20 (.126) 0.20 (.008) 1.60 (.063) 0.20 (.008) 0.50 (0.02) 0.25 (.010) N/A 1210 3225 3.20 (.126) 0.20 (.008) 2.50 (.098) 0.20 (.008) 0.50 (0.02) 0.25 (.010) Solder Reflow Only Dimensions Flexible Termination Millimeters (Inches) EIA Metric S L W T B Mounting Size Size Separation Length Width Thickness Bandwidth Technique Code Code Minimum 0603 1608 1.60 (.064) 0.17 (.007) 0.80 (.032) 0.15 (.006) 0.45 (.018) 0.15 (.006) 0.58 (.023) Solder Wave 0805 2012 2.00 (.079) 0.20 (.008) 1.25 (.049) 0.20 (.008) 0.50 (0.02) 0.25 (.010) 0.75 (.030) or See Table 2 for Solder Reflow Thickness 1206 3216 3.30 (.130) 0.40 (.016) 1.60 (.063) 0.20 (.008) 0.60 (.024) 0.25 (.010) N/A 1210 3225 3.30 (.130) 0.40 (.016) 2.50 (.098) 0.20 (.008) 0.60 (.024) 0.25 (.010) Solder Reflow Only Benefits -55C to +150C operating temperature range Non-polar device, minimizing installation concerns Lead (Pb)-Free, RoHS and REACH compliant 100% pure matte tin-plated termination finish allowing for EIA 0402, 0603, 0805, 1206, and 1210 case sizes excellent solderability DC voltage ratings of 10 V, 25 V, and 50 V SnPb termination finish option available upon request (5% Capacitance offerings ranging from 0.012 F to 10 F minimum) Available capacitance tolerances of 5%, 10%, and 20% Flexible termination option available upon request Commercial & Automotive (AECQ200) grades available KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com C1008 X8L 150C SMD 6/6/2014 2