Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Temperature 150C, X8L Dielectric, 10 50 VDC (Commercial & Automotive Grade) Overview KEMETs X8L dielectric features a 150C maximum operating stress to the rigid ceramic body, therefore mitigating flex cracks temperature and is considered general purpose high which can result in low IR or short circuit failures. Although temperature. These components are fixed, ceramic dielectric flexible termination technology does not eliminate the potential capacitors suited for high temperature bypass and decoupling for mechanical damage that may propagate during extreme applications or frequency discriminating circuits where Q and environmental and handling conditions, it does provide superior stability of capacitance characteristics are not critical. X8L flex performance over standard termination systems. exhibits a predictable change in capacitance with respect to time and voltage and boasts a minimal change in capacitance with In addition to commercial grade, automotive grade devices reference to ambient temperature up to 125C. Beyond 125C are available and meet the demanding Automotive Electronics X8L displays a wider variation in capacitance. Capacitance Council s AECQ200 qualification requirements. change is limited to 15% from -55C to +125C and +15, -40% from 125C to 150C. Driven by the demand for a more robust and reliable component, X8L dielectric capacitors were developed for critical applications where reliability at higher operating temperatures are a concern. These capacitors are widely used in automotive circuits as well as general high temperature applications. Concerned with flex cracks resulting from excessive tensile and shear stresses produced during board flexure and thermal cycling These devices are available with KEMET s Flexible termination technology which inhibits the transfer of board Ordering Information C 1210 X 106 K 8 N A C TU Case Size Specification/ Capacitance Capacitance Rated Voltage Failure Rate/ Packaging/Grade 2 Ceramic Dielectric Termination Finish 1 ( x ) Series Code (pF) Tolerance (VDC) Design (C-Spec) 0402 C = Standard 2 significant J = 5% 8 = 10 N = X8L A = N/A C = 100% Matte Sn SeePackaging 0603 X = Flexible digits + K = 10% 3 = 25 L = SnPb (5% Pb C-Spec Ordering 0805 Termination number of M = 20% 5 = 50 minimum) Options Tabl 1206 zeros below 1210 1 The flexible termination option is not available on EIA 0402 case size product. must be used in the 6th character position when ordering this case size. 2 Additional termination finish options may be available. Contact KEMET for details. 2 SnPb termination finish option is not available on Automotive Grade product. One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com C1008 X8L 150C SMD 11/12/2015 1Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Temperature 150C, X8L Dielectric, 10 50 VDC (Commercial & Automotive Grade) Packaging C-Spec Ordering Options Table Packaging/Grade Packaging Type Ordering Code (C-Spec) 1 Commercial Grade Bulk Bag Not Required (Blank) 7 Reel/Unmarked TU 7 Reel/Marked TM 2 7 Reel/Unmarked/2 mm pitch 7081 2 13 Reel/Unmarked/2 mm pitch 7082 3 Automotive Grade 7 Reel AUTO 13 Reel/Punched Paper/Unmarked AUTO7411 13 Reel/Embossed Plastic/Unmarked AUTO7210 2 7 Reel/Unmarked/2 mm pitch AUTO3190 2 13 Reel/Unmarked/2 mm pitch AUTO3191 1 Default packaging isBulk Ba. An ordering code C-Spec is not required forBulk Ba packaging. 1 The termsMarke andUnmarke pertain to laser marking option of capacitors. All packaging options labeled asUnmarke will contain capacitors that have not been laser marked. 2 The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2 mm pitch option seeTape & Reel Packaging Informatio. 3 Reeling tape options (Paper or Plastic) are dependent on capacitor case size ( x ) and thickness dimension. SeeChip Thickness/Tape & Reel Packaging Quantitie andTape & Reel Packaging Informatio. 3 For additional Information regardingAUT C-Spec options, seeAutomotive C-Spec Informatio. 3 All Automotive packaging C-Specs listed exclude the option to laser mark components. Please contact KEMET if you require a laser marked option. For more information seeCapacitor Markin. Benefits -55C to +150C operating temperature range Non-polar device, minimizing installation concerns Lead (Pb)-Free, RoHS and REACH compliant 100% pure matte tin-plated termination finish allowing for EIA 0402, 0603, 0805, 1206, and 1210 case sizes excellent solderability DC voltage ratings of 10 V, 25 V, and 50 V SnPb termination finish option available upon request (5% Pb Capacitance offerings ranging from 0.012 F to 10 F minimum) Available capacitance tolerances of 5%, 10%, and 20% Flexible termination option available upon request Commercial & Automotive (AECQ200) grades available Applications Typical applications include use in extreme environments such as down-hole oil exploration, under-hood automotive, military and aerospace. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com C1008 X8L 150C SMD 11/12/2015 2