Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Temperature 150C, X8L Dielectric, 10 50 VDC (Commercial & Automotive Grade) Overview KEMETs X8L dielectric features a 150C maximum operating circuits as well as general high temperature applications. temperature and is considered general purpose high Concerned with flex cracks resulting from excessive tensile and temperature. These components are fixed, ceramic dielectric shear stresses produced during board flexure and thermal cycling capacitors suited for high temperature bypass and decoupling These devices are available with KEMET s Flexible termination applications or frequency discriminating circuits where Q and technology which inhibits the transfer of board stress to the rigid stability of capacitance characteristics are not critical. X8L ceramic body, therefore mitigating flex cracks which can result exhibits a predictable change in capacitance with respect to time in low IR or short circuit failures. Although flexible termination and voltage and boasts a minimal change in capacitance with technology does not eliminate the potential for mechanical damage reference to ambient temperature up to 125C. Beyond 125C that may propagate during extreme environmental and handling X8L displays a wider variation in capacitance. Capacitance conditions, it does provide superior flex performance over standard change is limited to 15% from -55C to +125C and +15, -40% termination systems. from 125C to 150C. In addition to commercial grade, automotive grade devices Driven by the demand for a more robust and reliable are available and meet the demanding Automotive Electronics component, X8L dielectric capacitors were developed for critical Council s AECQ200 qualification requirements. applications where reliability at higher operating temperatures are a concern. These capacitors are widely used in automotive Ordering Information C 1210 X 106 K 8 N A C TU Case Size Specification/ Capacitance Capacitance Failure Rate/ Packaging/Grade 2 Ceramic Voltage Dielectric Termination Finish 1 3 ( x ) Series Code (pF) Tolerance Design (C-Spec) 0402 C = Standard 2 Significant J = 5% 8 = 10 V N = X8L A = N/A C = 100% Matte Sn Blank = Bulk 0603 X = Flexible Digits + Number K = 10% 3 = 25 V L = SnPb (5% TU = 7 Reel 0805 Termination of Zeros M = 20% 5 = 50 V minimum) Unmarked 1206 TM = 7 Reel Marked 1210 AUTO = Automotive Grade 7 Reel Unmarked 1 The flexible termination option is not available on EIA 0402 case size product. must be used in the 6th character position when ordering this case size. 2 Additional termination finish options may be available. Contact KEMET for details. 2, 3 SnPb termination finish option is not available on Automotive Grade product. 3 Additional reeling or packaging options may be available. Contact KEMET for details. One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com C1008 X8L 150C SMD 5/29/2013 1Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Temperature 150C, X8L Dielectric, 10 50 VDC (Commercial & Automotive Grade) Dimensions Standard Termination Millimeters (Inches) 100% Tin or SnPb Plate L W B T Nickel Plate S Conductive Metalization Electrodes EIA Metric S L W T B Mounting Size Size Separation Length Width Thickness Bandwidth Technique Code Code Minimum 0402 1005 1.00 (.040) 0.05 (.002) 0.50 (.020) 0.05 (.002) 0.30 (.012) 0.10 (.004) 0.30 (.012) Solder Reflow Only 0603 1608 1.60 (.063) 0.15 (.006) 0.80 (.032) 0.15 (.006) 0.35 (.014) 0.15 (.006) 0.70 (.028) See Table 2 for Solder Wave or 0805 2012 2.00 (.079) 0.20 (.008) 1.25 (.049) 0.20 (.008) 0.50 (0.02) 0.25 (.010) 0.75 (.030) Thickness Solder Reflow 1206 3216 3.20 (.126) 0.20 (.008) 1.60 (.063) 0.20 (.008) 0.50 (0.02) 0.25 (.010) N/A 1210 3225 3.20 (.126) 0.20 (.008) 2.50 (.098) 0.20 (.008) 0.50 (0.02) 0.25 (.010) Solder Reflow Only L W B T S Dimensions Flexible Termination Millimeters (Inches) EIA Metric S L W T B Mounting Size Size Separation Length Width Thickness Bandwidth Technique Code Code Minimum 0603 1608 1.60 (.064) 0.17 (.007) 0.80 (.032) 0.15 (.006) 0.45 (.018) 0.15 (.006) 0.58 (.023) Solder Wave 0805 2012 2.00 (.079) 0.20 (.008) 1.25 (.049) 0.20 (.008) 0.50 (0.02) 0.25 (.010) 0.75 (.030) or See Table 2 for Solder Reflow Thickness 1206 3216 3.30 (.130) 0.40 (.016) 1.60 (.063) 0.20 (.008) 0.60 (.024) 0.25 (.010) N/A 1210 3225 3.30 (.130) 0.40 (.016) 2.50 (.098) 0.20 (.008) 0.60 (.024) 0.25 (.010) Solder Reflow Only Benefits -55C to +150C operating temperature range Non-polar device, minimizing installation concerns Pb-Free and RoHS Compliant 100% pure matte tin-plated termination finish allowing for EIA 0402, 0603, 0805, 1206, and 1210 case sizes excellent solderability DC voltage ratings of 10 V, 25 V, and 50 V SnPb termination finish option available upon request (5% Capacitance offerings ranging from 0.012 F to 10 F minimum) Available capacitance tolerances of 5%, 10%, and 20% Flexible termination option available upon request Commercial & Automotive (AECQ200) grades available KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com C1008 X8L 150C SMD 5/29/2013 2 Ceramic Surface Mount Ceramic Surface Mount