Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Commercial Off-The-Shelf (COTS) for Higher Reliability Applications, X7R Dielectric, 6.3 250 VDC Overview KEMETs COTS program is an extension of KEMET knowledge All COTS testing includes voltage conditioning and post-electrical of high reliability test regimes and requirements. KEMET testing as per MILPRF55681. For enhanced reliability, KEMET regularly supplies up-screened products by working with also provides the following test level options and conformance customer drawings and imposing specified design and test certifications: requirements. The COTS program offers the same high quality Test Level A Test Level B Test Level C and high reliability components as up-screened products, but at a lower cost to the customer. This is accomplished by Voltage Conditioning Voltage Conditioning Voltage Conditioning DWV DWV DWV eliminating the need for customer-specific drawings to achieve IR 25C IR 25C IR 25C CAP CAP CAP the reliability level required for customer applications. A series DF DF DF of tests and inspections have been selected to provide the accelerated conditioning and 100% screening necessary to PDA 8% PDA 8% PDA 8% eliminate infant mortal failures from the population. C of C DPA DPA KEMETs X7R dielectric features a 125C maximum operating C of C 85/85 temperature and is considered temperature stable. The Electronics Components, Assemblies & Materials Association C of C (EIA) characterizes X7R dielectric as a Class II material. Components of this classification are fixed, ceramic dielectric capacitors suited for bypass and decoupling applications or for frequency discriminating circuits where Q and stability of capacitance characteristics are not critical. X7R exhibits a predictable change in capacitance with respect to time and voltage and boasts a minimal change in capacitance with reference to ambient temperature. Capacitance change is limited to 15% from 55C to +125C. Ordering Information C 1210 T 104 K 5 R A C TU Rated Case Size Specification/ Capacitance Capacitance Termination Packaging/ Ceramic Voltage Dielectric Test Level 1 ( x ) Series Code (pF) Tolerance Finish Grade (C-Spec) (VDC) 0402 T = COTS Two J = 5% 9 = 6.3 R = X7R A = Testing per MIL- C = 100% See 0603 significant K = 10% 8 = 10 PRF-55681 PDA 8% Matte SnPackaging 0805 digits and M = 20% 4 = 16 B= Testing per MIL- L = SnPb (5% C-Spec 1206 number of 3 = 25 PRF-55681 PDA 8%, DPA Pb minimum) Ordering 1210 zeros 5 = 50 per EIA-469 Options Tabl 1812 1 = 100 C = Testing per MIL- 2220 2 = 200 PRF-55681 PDA 8%, DPA A = 250 per EIA-469, Humidity per MIL-STD-202, Method 103, Condition A 1 Additional termination finish options may be available. Contact KEMET for details. One world. One KEMET KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1027 X7R COTS SMD 6/12/2019 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comSurface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Commercial Off-The-Shelf (COTS) for Higher Reliability Applications, X7R Dielectric, 6.3 250 VDC Packaging C-Spec Ordering Options Table Packaging/Grade 1 Packaging Type Ordering Code (C-Spec) Bulk Bag/Unmarked Not required (Blank) 7 Reel/Unmarked TU 7411 (EIA 0603 and smaller case sizes) 13 Reel/Unmarked 7210 (EIA 0805 and larger case sizes) 7 Reel/Marked TM 7040 (EIA 0603) 13 Reel/Marked 7215 (EIA 0805 and larger case sizes) 2 7 Reel/Unmarked/2mm pitch 7081 2 13 Reel/Unmarked/2mm pitch 7082 1 Default packaging isBulk Ba. An ordering code C-Spec is not required forBulk Ba packaging. 1 The termsMarke andUnmarke pertain to laser marking option of capacitors. All packaging options labeled asUnmarke will contain capacitors that have not been laser marked. Please contact KEMET if you require a laser marked option. For more information seeCapacitor Markin. 2 The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2 mm pitch option seeTape & Reel Packaging Informatio. Benefits 55C to +125C operating temperature range DC voltage ratings of 6.3 V, 10 V, 16 V, 25 V, 50 V, 100 V, Lead (Pb)-free, RoHS and REACH compliant 200 V, and 250 V Voltage conditioning and post-electrical testing per Capacitance offerings ranging from 10 pF to 22 F MILPRF55681 Available capacitance tolerances of 5%, 10%, and 20% Destructive Physical Analysis (DPA) per EIA469 Non-polar device, minimizing installation concerns Biased humidity testing (85/85) per MILSTD202 100% pure matte tin-plated termination finish allowing for Certificate of Compliance excellent solderability Temperature stable dielectric SnPb termination finish option available upon request EIA 0402, 0603, 0805, 1206, 1210, 1812, and (5% Pb minimum) 2220 case sizes Applications Typical applications include military, space quality and high reliability electronics. KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1027 X7R COTS SMD 6/12/2019 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com