Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage with Flexible Termination System (HV FT-CAP) X7R Dielectric, 500 3,000 VDC (Commercial & Automotive Grade) Overview KEMETs High Voltage with Flexible Termination (HV FT-CAP) Combined with the stability of an X7R dielectric and designed to surface mount MLCCs in X7R dielectric address the primary accommodate all capacitance requirements, these flex-robust failure mode of MLCCs flex cracks, which are typically the result devices are RoHS Compliant, offer up to 5 mm of flex-bend of excessive tensile and shear stresses produced during board capability and exhibits a predictable change in capacitance with flexure and thermal cycling. Featuring several of the highest respect to time and voltage. Capacitance change with reference to CV (capacitance/voltage) values available in the industry, these ambient temperature is limited to 15% from -55C to +125C. devices utilize a pliable and conductive silver epoxy between the base metal and nickel barrier layers of the termination system. Automotive Grade is available for applications requiring proven, The addition of this epoxy layer inhibits the transfer of board reliable performance in harsh environments. Whether under-hood stress to the rigid ceramic body, therefore mitigating flex cracks or in-cabin, these capacitors are designed for mission and safety which can result in low IR or short circuit failures. Although critical automotive circuits. Stricter testing protocol and inspection flexible termination technology does not eliminate the potential criteria have been established for automotive grade products in for mechanical damage that may propagate during extreme recognition of potentially harsh environmental conditions. KEMET environmental and handling conditions, it does provide superior automotive grade series capacitors meet the demanding Automotive flex performance over standard termination systems. Electronics Council s AECQ200 qualification requirements. The HV FT-CAP offers low leakage current, exhibits low ESR at high frequencies and finds conventional use as snubbers or filters in applications such as switching power supplies and lighting ballasts. Their exceptional performance at high frequencies has made them a preferred choice of design engineers worldwide. In addition to their use in power supplies, these capacitors are widely used in industries related to automotive(hybrid), telecommunications, medical, military, aerospace, semiconductors and test/diagnostic equipment. Ordering Information C 1210 X 154 K C R A C TU Case Size Specification/ Capacitance Capacitance Failure Rate/ Packaging/Grade 1 Ceramic Voltage Dielectric Termination Finish 2 ( x ) Series Code (pF) Tolerance Design (C-Spec) 0805 X = Flexible 2 Significant J = 5% C = 500 V R = X7R A = N/A C = 100% Matte Sn Blank = Bulk Digits + Number 1206 Termination K = 10% B = 630 V L = SnPb (5% min) TU = 7 Reel of Zeros 1210 M = 20% D = 1,000 V Unmarked F = 1,500 V TM = 7 Reel Marked 1808 G = 2,000 V 1812 C = 100% Matte Sn AUTO = Automotive Z = 2,500 V 1825 Grade 7 Reel H = 3,000 V 2220 Unmarked 2225 1 Additional termination finish options may be available. Contact KEMET for details. 1, 2 SnPb termination finish option is not available on Automotive Grade product. 2 Additional reeling or packaging options may be available. Contact KEMET for details. One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com C1025 X7R HV FT-CAP SMD 4/30/2014 1Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage with Flexible Termination System, X7R Dielectric, 500 3,000 VDC (Commercial & Automotive Grade) Dimensions Millimeters (Inches) L W B T S EIA Metric S L W T B Mounting Size Size Separation Length Width Thickness Bandwidth Technique Code Code Minimum 0805 2012 2.00 (.079) 0.20 (.008) 1.25 (.049) 0.20 (.008) 0.50 (0.02) 0.25 (.010) 0.75 (.030) Solder Wave or Solder Reflow 1206 3216 3.30 (.130) 0.40 (.016) 1.60 (.063) 0.20 (.008) 0.60 (.024) 0.25 (.010) 1210 3225 3.30 (.130) 0.40 (.016) 2.50 (.098) 0.20 (.008) 0.60 (.024) 0.25 (.010) 1808 4520 4.70 (.185) 0.50 (.020) 2.00 (.079) 0.20 (.008) 0.70 (.028) 0.35 (.014) See Table 2 for Thickness 1812 4532 4.50 (.178) 0.40 (.016) 3.20 (.126) 0.30 (.012) 0.70 (.028) 0.35 (.014) N/A Solder Reflow Only 1825 4564 4.60 (.181) 0.40 (.016) 6.40 (.252) 0.40 (.016) 0.70 (.028) 0.35 (.014) 2220 5650 5.90 (.232) 0.75 (.030) 5.00 (.197) 0.40 (.016) 0.70 (.028) 0.35 (.014) 2225 5664 5.90 (.232) 0.75 (.030) 6.40 (.248) 0.40 (.016) 0.70 (.028) 0.35 (.014) Benefits -55C to +125C operating temperature range Capacitance offerings ranging from 130 pF to 0.33 F Industry-leading CV values Available capacitance tolerances of 5%, 10% or 20% Superior flex performance (up to 5 mm) Low ESR and ESL Exceptional performance at high frequencies Non-polar device, minimizing installation concerns Lead (Pb)-Free, RoHS and REACH compliant Commercial and Automotive (AECQ200) Grades available EIA 0805, 1206, 1210, 1808, 1812, 1825, 2220, and 100% pure matte tin-plated termination finish allowing for 2225 case sizes excellent solderability DC voltage ratings of 500 V, 630 V, 1 KV, 1.5 KV, 2 KV, SnPb plated termination finish option available upon request (5% 2.5 KV, and 3 KV minimum) Applications Typical applications include switch mode power supplies (input filters, resonators, tank circuits, snubber circuits, output filters), high voltage coupling and DC blocking, lighting ballasts, voltage multiplier circuits, DC/DC converters and coupling capacitors in uk converters. Markets include power supply, LCD fluorescent backlight ballasts, HID lighting, telecom equipment, industrial and medical equipment/control, LAN/WAN interface, analog and digital modems, and automotive (electric and hybrid vehicles, charging stations and lighting) applications. KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com C1025 X7R HV FT-CAP SMD 4/30/2014 2 Ceramic Surface Mount