Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Flexible Termination System (FT-CAP), C0G Dielectric, 10 250 VDC (Commercial & Automotive Grade) Overview KEMETs Flexible Termination (FT-CAP) Multilayer Ceramic Combined with the stability of C0G dielectric and designed to Capacitor in C0G dielectric incorporates a unique, flexible accommodate all capacitance requirements, these flex-robust termination system that is integrated with KEMETs devices are RoHS Compliant, offer up to 5 mm of flex-bend standard termination materials. A conductive silver epoxy capability and exhibit no change in capacitance with respect is utilized between the base metal and nickel barrier to time and voltage. Capacitance change with reference to layers of KEMETs standard termination system in order ambient temperature is limited to 30 ppm/C from 55C to to establish pliability while maintaining terminal strength, +125C. solderability and electrical performance. This technology was developed in order to address the primary failure In addition to Commercial Grade, Automotive Grade devices mode of MLCCs flex cracks, which are typically the result are available which meet the demanding Automotive of excessive tensile and shear stresses produced during Electronics Council s AECQ200 qualification requirements. board flexure and thermal cycling. Flexible termination technology inhibits the transfer of board stress to the rigid ceramic body, therefore mitigating flex cracks which can result in low IR or short circuit failures. Although this technology does not eliminate the potential for mechanical damage that may propagate during extreme environmental and handling conditions, it does provide superior flex performance over standard termination systems. FT-CAP complements KEMETs Open Mode, Floating Electrode (FE-CAP), Floating Electrode with Flexible Termination (FF-CAP), and KEMET Power Solutions (KPS) product lines by providing a complete portfolio of flex mitigation solutions. Ordering Information C 1206 X 563 J 3 G A C TU Rated Failure Case Size Specification/ Capacitance Capacitance Packaging/ 2 Ceramic Voltage Dielectric Rate/ Termination Finish 1 ( x ) Series Code (pF) Tolerance Grade (C-Spec) (VDC) Design 0603 X = Flexible Two significant digits B = 0.10 pF 8 = 10 G = C0G A = N/A C = 100% Matte Sn See 0805 Termination and number of zeros. C = 0.25 pF 4 = 16 L = SnPb (5% Pb minimum)Packaging 1206 Use 9 for 1.0 9.9 pF D = 0.5 pF 3 = 25 C-Spec 1210 Use 8 for 0.5 .99 pF F = 1% 5 = 50 Ordering 1812 e.g., 2.2 pF = 229 G = 2% 1 = 100 Options J = 5% 2 = 200 1825 e.g., 0.5 pF = 508 Tabl K = 10% A = 250 2220 M = 20% 2225 1 Additional capacitance tolerance offerings may be available. Contact KEMET for details. 2 Additional termination finish options may be available. Contact KEMET for details. Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1062 C0G FT-CAP SMD 9/14/2020 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comSurface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Flexible Termination System (FT-CAP), C0G Dielectric, 10 250 VDC (Commercial & Automotive Grade) Packaging C-Spec Ordering Options Table Packaging/Grade 1 Packaging Type Ordering Code (C-Spec) 1 Commercial Grade Bulk Bag Not required (Blank) 7 Reel/Unmarked TU 7411 (EIA 0603 and smaller case sizes) 13 Reel/Unmarked 7210 (EIA 0805 and larger case sizes) 2 7 Reel/Unmarked/2mm pitch 7081 2 13 Reel/Unmarked/2mm pitch 7082 3 Automotive Grade 7 Reel AUTO AUTO7411 (EIA 0603 and smaller case sizes) 13 Reel/Unmarked AUTO7210 (EIA 0805 and larger case sizes) 2 7 Reel/Unmarked/2mm pitch 3190 2 13 Reel/Unmarked/2mm pitch 3191 1 Default packaging isBulk Ba. An ordering code C-Spec is not required forBulk Ba packaging. 1 The termsMarke andUnmarke pertain to laser marking option of capacitors. All packaging options labeled asUnmarke will contain capacitors that have not been laser marked. The option to laser mark is not available on these devices. For more information seeCapacitor Markin. 2 The 2mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2mm pitch option seeTape & Reel Packaging Informatio. 3 Reeling tape options (Paper or Plastic) are dependent on capacitor case size ( x ) and thickness dimension. SeeChip Thickness/Tape & Reel Packaging Quantitie andTape & Reel Packaging Informatio. 3 For additional Information regardingAUT C-Spec options, seeAutomotive C-Spec Informatio. 3 All Automotive packaging C-Specs listed exclude the option to laser mark components. The option to laser mark is not available on these devices. For more information seeCapacitor Markin. Benefits 55C to +125C operating temperature range High ripple current capability Superior flex performance (up to 5 mm) Preferred capacitance solution at line frequencies and into Lead (Pb)-Free, RoHS and REACH compliant the MHz range EIA 0603, 0805, 1206, 1210, 1812, 1825, 2220, and No capacitance change with respect to applied rated DC 2225 case sizes voltage DC voltage ratings of 10 V, 16 V, 25 V, 50 V, 100 V, Negligible capacitance change with respect to temperature 200 V, and 250 V from 55C to +125C Capacitance offerings ranging from 0.5 pF up to 0.47 F Non-polar device, minimizing installation concerns Available capacitance tolerances of 0.10pF, 0.25 pF, 100% pure matte tin-plated termination finish allowing for 0.5 pF, 1%, 2%, 5%, 10%, and 20% excellent solderability No piezoelectric noise Commercial & Automotive (AECQ200) Grades available Extremely low ESR and ESL SnPb termination finish option available upon request High thermal stability (5% Pb minimum) Applications Typical applications include critical timing, tuning, circuits requiring low loss, circuits with pulse, high current, decoupling, bypass, filtering, transient voltage suppression and blocking, as well as energy storage in critical and safety relevant circuits without (integrated) current limitation, including those subject to high levels of board flexure or temperature cycling. KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1062 C0G FT-CAP SMD 9/14/2020 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com