Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
Flexible Termination System (FT-CAP), C0G Dielectric,
10 250 VDC (Commercial & Automotive Grade)
Overview
KEMETs Flexible Termination (FT-CAP) Multilayer Ceramic Combined with the stability of C0G dielectric and designed to
Capacitor in C0G dielectric incorporates a unique, flexible accommodate all capacitance requirements, these flex-robust
termination system that is integrated with KEMETs devices are RoHS Compliant, offer up to 5 mm of flex-bend
standard termination materials. A conductive silver epoxy capability and exhibit no change in capacitance with respect
is utilized between the base metal and nickel barrier to time and voltage. Capacitance change with reference to
layers of KEMETs standard termination system in order ambient temperature is limited to 30 ppm/C from 55C to
to establish pliability while maintaining terminal strength, +125C.
solderability and electrical performance. This technology
was developed in order to address the primary failure In addition to Commercial Grade, Automotive Grade devices
mode of MLCCs flex cracks, which are typically the result are available which meet the demanding Automotive
of excessive tensile and shear stresses produced during Electronics Council's AECQ200 qualification requirements.
board flexure and thermal cycling. Flexible termination
technology inhibits the transfer of board stress to the rigid
ceramic body, therefore mitigating flex cracks which can
result in low IR or short circuit failures.
Although this technology does not eliminate the potential
for mechanical damage that may propagate during extreme
environmental and handling conditions, it does provide
superior flex performance over standard termination
systems. FT-CAP complements KEMETs Open Mode,
Floating Electrode (FE-CAP), Floating Electrode with
Flexible Termination (FF-CAP), and KEMET Power Solutions
(KPS) product lines by providing a complete portfolio of
flex mitigation solutions.
Ordering Information
C 1206 X 563 J 3 G A C TU
Rated Failure
Case Size Specification/ Capacitance Capacitance Packaging/
2
Ceramic Voltage Dielectric Rate/ Termination Finish
1
( x ) Series Code (pF) Tolerance Grade (C-Spec)
(VDC) Design
0603 X = Flexible Two significant digits B = 0.10 pF 8 = 10 G = C0G A = N/A C = 100% Matte Sn See
0805 Termination and number of zeros. C = 0.25 pF 4 = 16 L = SnPb (5% Pb minimum)Packaging
1206 Use 9 for 1.0 9.9 pF D = 0.5 pF 3 = 25 C-Spec
1210 Use 8 for 0.5 .99 pF F = 1% 5 = 50 Ordering
1812 e.g., 2.2 pF = 229 G = 2% 1 = 100 Options
J = 5% 2 = 200
1825 e.g., 0.5 pF = 508 Tabl below
K = 10% A = 250
2220
M = 20%
2225
1
Additional capacitance tolerance offerings may be available. Contact KEMET for details.
2
Additional termination finish options may be available. Contact KEMET for details.
One world. One KEMET
KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.com C1062_C0G_FT-CAP_SMD 11/21/2016 1Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
Flexible Termination System (FT-CAP), C0G Dielectric, 10 250 VDC (Commercial & Automotive Grade)
Packaging C-Spec Ordering Options Table
Packaging/Grade
1
Packaging Type
Ordering Code (C-Spec)
1
Commercial Grade
Bulk Bag Not required (Blank)
7" Reel/Unmarked TU
7411 (EIA 0603 and smaller case sizes)
13" Reel/Unmarked
7210 (EIA 0805 and larger case sizes)
2
7" Reel/Unmarked/2mm pitch 7081
2
13" Reel/Unmarked/2mm pitch 7082
3
Automotive Grade
7" Reel AUTO
AUTO7411 (EIA 0603 and smaller case sizes)
13" Reel/Unmarked
AUTO7210 (EIA 0805 and larger case sizes)
2
7" Reel/Unmarked/2mm pitch 3190
2
13" Reel/Unmarked/2mm pitch 3191
1
Default packaging isBulk Ba. An ordering code C-Spec is not required forBulk Ba packaging.
1
The termsMarke andUnmarke pertain to laser marking option of capacitors. All packaging options labeled asUnmarke will contain
capacitors that have not been laser marked. The option to laser mark is not available on these devices. For more information seeCapacitor Markin.
2
The 2mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case
size devices. For more information regarding 2mm pitch option seeTape & Reel Packaging Informatio.
3
Reeling tape options (Paper or Plastic) are dependent on capacitor case size ( x ) and thickness dimension. SeeChip Thickness/Tape & Reel
Packaging Quantitie andTape & Reel Packaging Informatio.
3
For additional Information regardingAUT C-Spec options, seeAutomotive C-Spec Informatio.
3
All Automotive packaging C-Specs listed exclude the option to laser mark components. The option to laser mark is not available on these devices. For
more information seeCapacitor Markin.
Benefits
55C to +125C operating temperature range High ripple current capability
Superior flex performance (up to 5 mm) Preferred capacitance solution at line frequencies and into
Lead (Pb)-Free, RoHS and REACH compliant the MHz range
EIA 0603, 0805, 1206, 1210, 1812, 1825, 2220, and No capacitance change with respect to applied rated DC
2225 case sizes voltage
DC voltage ratings of 10 V, 16 V, 25 V, 50 V, 100 V, Negligible capacitance change with respect to temperature
200 V, and 250 V from 55C to +125C
Capacitance offerings ranging from 0.5 pF up to 0.47 F Non-polar device, minimizing installation concerns
Available capacitance tolerances of 0.10pF, 0.25 pF, 100% pure matte tin-plated termination finish allowing for
0.5 pF, 1%, 2%, 5%, 10%, and 20% excellent solderability
No piezoelectric noise Commercial & Automotive (AECQ200) Grades available
Extremely low ESR and ESL SnPb termination finish option available upon request
High thermal stability (5% Pb minimum)
Applications
Typical applications include critical timing, tuning, circuits requiring low loss, circuits with pulse, high current, decoupling,
bypass, filtering, transient voltage suppression and blocking, as well as energy storage in critical and safety relevant circuits
without (integrated) current limitation, including those subject to high levels of board flexure or temperature cycling.
KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.com C1062_C0G_FT-CAP_SMD 11/21/2016 2