Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage with Flexible Termination System (HV FT-CAP) X7R Dielectric, 500 3,000 VDC (Automotive Grade) Overview KEMETs Automotive Grade High Voltage Surface Mount Combined with the stability of an X7R dielectric and designed MLCCs with Flexible Termination (HV FT-CAP) address the to accommodate all capacitance requirements, these flex- primary failure mode of MLCCs flex cracks, which are robust devices are RoHS-compliant, offer up to 5 mm of typically the result of excessive tensile and shear stresses flex-bend capability and exhibits a predictable change in produced during board flexure and thermal cycling. Featuring capacitance with respect to time and voltage. Capacitance several of the highest CV (capacitance/voltage) values change with reference to ambient temperature is limited to available in the industry, these devices utilize a pliable and 15% from 55C to +125C. conductive silver epoxy between the base metal and nickel barrier layers of the termination system. The addition of Whether under-hood or in-cabin, these capacitors are designed this epoxy layer inhibits the transfer of board stress to the to provide relaible performance in mission and safety rigid ceramic body, therefore mitigating flex cracks which critical automotive circuits. Stricter testing protocol and can result in low IR or short circuit failures. Although flexible inspection criteria have been established for automotive grade termination technology does not eliminate the potential for products in recognition of potentially harsh environmental mechanical damage that may propagate during extreme conditions. KEMET automotive grade series capacitors meet environmental and handling conditions, it does provide the demanding Automotive Electronics Council s AEC-Q200 superior flex performance over standard termination qualification requirements. systems. The HV FT-CAP offers low leakage current, exhibits low ESR at high frequencies and finds conventional use as snubbers or filters in applications such as switching power supplies and lighting ballasts. Their exceptional performance at high frequencies has made them a preferred choice of design engineers worldwide. In addition to their use in power supplies, these capacitors are widely used in industries related to automotive(hybrid), telecommunications, medical, military, aerospace, semiconductors and test/diagnostic equipment. Ordering Information C 1210 X 154 K C R A C AUTO Case Size Specification/ Capacitance Capacitance Rated Voltage Failure Rate/ Termination Packaging/Grade Ceramic Dielectric 1 ( x ) Series Code (pF) Tolerance (VDC) Design Finish (C-Spec) 0603 X = Flexible Two J = 5% C = 500 R = X7R A = N/A C = 100% SeePackaging 0805 termination significant C-Spec Ordering K = 10% B = 630 Matte Sn 1206 digits and Options Tabl M = 20% D = 1,000 1210 number of F = 1,500 1808 zeros. G = 2,000 1812 1825 Z = 2,500 2220 H = 3,000 2225 1 Additional termination finish options may be available. Contact KEMET for details. One world. One KEMET KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1077 X7R HV FT AUTO SMD 9/10/2019 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comSurface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage with Flexible Termination System, X7R Dielectric, 500 3,000 VDC (Automotive Grade) Packaging C-Spec Ordering Options Table Packaging/Grade 1 Packaging Type 3 Ordering Code (C-Spec) 7 Reel AUTO AUTO7411 (EIA 0603 and smaller case sizes) 13 Reel/Unmarked AUTO7210 (EIA 0805 and larger case sizes) 2 7 Reel/Unmarked/2 mm pitch 3190 2 13 Reel/Unmarked/2 mm pitch 3191 1 Reeling tape options (Paper or Plastic) are dependent on capacitor case size ( x ) and thickness dimension. SeeChip Thickness/Tape & Reel Packaging Quantitie andTape & Reel Packaging Informatio. 2 The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2 mm pitch option seeTape & Reel Packaging Informatio. 3 All Automotive packaging C-Specs listed exclude the option to laser mark components. Please contact KEMET if you require a laser marked option. For more information seeCapacitor Markin. 3 For additional Information regardingAUT C-Spec options, seeAutomotive C-Spec Informatio. Benefits AEC-Q200 automotive qualified DC voltage ratings of 500 V, 630 V, 1 KV, 1.5 KV, 2 KV, 55C to +125C operating temperature range 2.5 KV, and 3 KV Industry-leading CV values Capacitance offerings ranging from 10 pF to 560 nF Superior flex performance (up to 5 mm) Available capacitance tolerances of 5%, 10% or 20% Exceptional performance at high frequencies Low ESR and ESL Lead (Pb)-free, RoHS and REACH compliant Non-polar device, minimizing installation concerns EIA 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220, 100% pure matte tin-plated termination finish allowing for and 2225 case sizes excellent solderability Applications Typical applications include switch mode power supplies (input filters, resonators, tank circuits, snubber circuits, output filters), high voltage coupling and DC blocking, lighting ballasts, voltage multiplier circuits, DC/DC converters and coupling capacitors in uk converters. Markets include power supply, LCD fluorescent backlight ballasts, HID lighting, telecom equipment, industrial and medical equipment/control, LAN/WAN interface, analog and digital modems, and automotive (electric and hybrid vehicles, charging stations and lighting applications). Application Note X7R dielectric is not recommended for AC line filtering or pulse applications. These capacitors and/or the assembled circuit board containing these capacitors may require a protective surface coating to prevent external surface arcing. KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1077 X7R HV FT AUTO SMD 9/10/2019 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com