Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage with Flexible Termination System (HV FT-CAP) X7R Dielectric, 500 3,000 VDC (Commercial Grade) Overview KEMETs High Voltage with Flexible Termination (HV FT-CAP) Combined with the stability of an X7R dielectric and designed surface mount MLCCs in X7R dielectric address the primary to accommodate all capacitance requirements, these flex- failure mode of MLCCs flex cracks, which are typically the robust devices are RoHS-compliant, offer up to 5 mm of result of excessive tensile and shear stresses produced flex-bend capability and exhibits a predictable change in during board flexure and thermal cycling. Featuring several capacitance with respect to time and voltage. Capacitance of the highest CV (capacitance/voltage) values available in change with reference to ambient temperature is limited to the industry, these devices utilize a pliable and conductive 15% from 55C to +125C. silver epoxy between the base metal and nickel barrier layers of the termination system. The addition of this epoxy layer In addition to Commercial Grade, Automotive Grade devices are inhibits the transfer of board stress to the rigid ceramic available which meet the demanding Automotive Electronics body, therefore mitigating flex cracks which can result in Council s AEC-Q200 qualification requirements. low IR or short circuit failures. Although flexible termination technology does not eliminate the potential for mechanical damage that may propagate during extreme environmental and handling conditions, it does provide superior flex performance over standard termination systems. The HV FT-CAP offers low leakage current, exhibits low ESR at high frequencies and finds conventional use as snubbers or filters in applications such as switching power supplies and lighting ballasts. Their exceptional performance at high frequencies has made them a preferred choice of design engineers worldwide. In addition to their use in power supplies, these capacitors are widely used in industries related to automotive(hybrid), telecommunications, medical, military, aerospace, semiconductors and test/diagnostic equipment. Ordering Information C 1210 X 154 K C R A C TU Case Size Specification/ Capacitance Capacitance Rated Voltage Failure Rate/ Packaging/ 1 Ceramic Dielectric Termination Finish ( x ) Series Code (pF) Tolerance (VDC) Design Grade (C-Spec) 0603 X = Flexible Two J = 5% C = 500 R = X7R A = N/A C = 100% Matte Sn See 0805 Termination significantPackaging K = 10% B = 630 L = SnPb 1206 digits and C-Spec M = 20% D = 1,000 (5% Pb minimum) 1210 number of Ordering F = 1,500 1808 zeros. Options Tabl G = 2,000 1812 1825 Z = 2,500 2220 H = 3,000 2225 1 Additional termination finish options may be available. Contact KEMET for details. One world. One KEMET KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1025 X7R HV FT-CAP SMD 12/19/2018 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comSurface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage with Flexible Termination System, X7R Dielectric, 500 3,000 VDC (Commercial Grade) Packaging C-Spec Ordering Options Table Packaging/Grade Packaging Type 1 Ordering Code (C-Spec) Bulk Bag/Unmarked Not required (Blank) 7 Reel/Unmarked TU 7411 (EIA 0603 and smaller case sizes) 13 Reel/Unmarked 7210 (EIA 0805 and larger case sizes) 7 Reel/Marked TM 7040 (EIA 0603) 13 Reel/Marked 7215 (EIA 0805 and larger case sizes) 2 7 Reel/Unmarked/2mm pitch 7081 2 13 Reel/Unmarked/2mm pitch 7082 1 Default packaging isBulk Ba. An ordering code C-Spec is not required forBulk Ba packaging. 1 The termsMarke andUnmarke pertain to laser marking option of capacitors. All packaging options labeled asUnmarke will contain capacitors that have not been laser marked. Please contact KEMET if you require a laser marked option. For more information seeCapacitor Markin. 2 The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2 mm pitch option seeTape & Reel Packaging Informatio. Benefits 55C to +125C operating temperature range Capacitance offerings ranging from 10 pF to 560 nF Industry-leading CV values Available capacitance tolerances of 5%, 10% or 20% Superior flex performance (up to 5 mm) Low ESR and ESL Exceptional performance at high frequencies Non-polar device, minimizing installation concerns Lead (Pb)-free, RoHS and REACH compliant Automotive (AECQ200) Grade available EIA 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220, 100% pure matte tin-plated termination finish allowing for and 2225 case sizes excellent solderability DC voltage ratings of 500 V, 630 V, 1 KV, 1.5 KV, 2 KV, SnPb plated termination finish option available upon 2.5 KV, and 3 KV request (5% Pb minimum) Applications Typical applications include switch mode power supplies (input filters, resonators, tank circuits, snubber circuits, output filters), high voltage coupling and DC blocking, lighting ballasts, voltage multiplier circuits, DC/DC converters and coupling capacitors in uk converters. Markets include power supply, LCD fluorescent backlight ballasts, HID lighting, telecom equipment, industrial and medical equipment/control, LAN/WAN interface, analog and digital modems, and automotive (electric and hybrid vehicles, charging stations and lighting applications). Application Note X7R dielectric is not recommended for AC line filtering or pulse applications. These capacitors and/or the assembled circuit board containing these capacitors may require a protective surface coating to prevent external surface arcing. KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1025 X7R HV FT-CAP SMD 12/19/2018 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com