Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C700, Encapsulated, KJY Type, X1 440/400 VAC/Y2 300/250 VAC (Industrial Grade) Overview KEMETs C700 encapsulated radial leaded ceramic disc capacitor fail, but could result in a risk of fire. The class Y capacitors are specifically designed for interference- capacitor is primarily used in line-to-ground (line by-pass) suppression AC line filtering applications. Having applications. In this application, failure of the capacitor internationally recognized safety certifications, these could lead to danger of electric shock. capacitors are well-suited for applications that require keeping potentially disruptive or damaging line transients With a working voltage of 440/400 VAC in line-to-line and EMI out of susceptible equipment. They are also an (Class X) and 300/250 VAC in line-to-ground (Class Y) ideal solution when needing to suppress line disturbances applications, these safety capacitors meet the impulse test at the source. criteria outlined in IEC Standard 60384. Meeting subclass X1 and Y2 requirements, these devices are certified to withstand Safety Certified Capacitors are classified as either X and/or impulses up to 4 KV (X1) and 5 KV (Y2) respectively. These Y capacitors. Class X capacitors are primarily used in line- encapsulated devices also meet the flame test requirements to-line (across-the-line) applications. In this application, outlined in UL Standard 94 V-0. there is no danger of electric shock to humans should the Benefits Safety standard recognized (IEC 60384-14) Reliable operation up to 125C Class X1 440/400 VAC/Y2 300/250 VAC 5.0 mm, 7.5 mm, 10 mm, and 12.5mm lead spacing Lead(Pb)-free and RoHS Compliant Halogen-free Capacitance offerings ranging from 100 pF up to 10 nF Available capacitance tolerances of 5%, 10%, and 20% High-reliability Preformed (crimped) or straight lead configurations Non-polar device, minimizing installation concerns Encapsulation meets flammability standard UL 94 V-0 Applications Typical applications include: Line-to-line (Class X) filtering Line-to-ground (Class Y) filtering Antenna coupling Primary and secondary coupling (switching power supplies) Line disturbances suppression (motors and motor controls, relays, switching power supplies and invertors) Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1103 KJY 10/22/2021 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comRadial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C700, Encapsulated, KJY Type, X1 440/400 VAC/Y2 300/250 VAC (Industrial Grade) Ordering Information C7 8 1 U 103 M Y V D A A 7301 Ceramic Body Lead Capacitance Capacitance Rated Dielectric/ Lead Failure Packaging Spec. Design 1,2,4 1,3,4 Series Diameter Spacing Code (pF) Tolerance Voltage Temp. Char. Configuration Rate (C-Spec) C7 = 1 = 8.0 mm 5 = 5.0 mm U = Two J = 5% Y = X1 S = SL D = A = Straight A = See Ceramic 2 = 9.0 mm 7 = 7.5 mm Safety significant K = 10% 400 Y = Y5P Disc B = Vertical N/APackaging 700 3 = 10.0 mm 1 = 10.0 mm digits and M = 20% VAC/ W = Y5U Kink C-Spec 4 = 11.0 mm 2 = 12.5 mm Number of Y2 250 V = Y5V C = Outside Ordering 5 = 12.0mm zeroes VAC Kink Options 6 = 13.0 mm Z = X1 D = Inside Tabl 7 = 14.0 mm 440 Kink below 8 = 15.0 mm VAC/ 9 = 16.0 mm Y2 300 VAC 1 Due to a high risk of arcing,Inside Kin lead configuration cannot be combined with the 5 mm lead spacing option. TheInside Kin option is only available on capacitors with lead spacing of 7.5 mm or greater. A potential for arcing may exist when combining theInside Kin lead configuration with a 7.5 mm lead spacing option, especially in high humidity environments and/or when exposure to voltages and transients may impact creepage and clearance requirements. 2 Capacitor body diameter will limit available lead spacing and packaging options. SeeDimension andProduct Ordering Codes and Rating sections of this document to determine availability. 3 Vertical Kin,Outside Kin andInside Kin lead configurations cannot be combined with the bulk/20 mm lead length option (WL20). 20 mm lead length is only available on capacitors with straight leads (lead configuration ordering code). For nonstandard lead length inquiries, please contact KEMET. 4 Bulk packaging lead length availability is dependent uponLead Configuratio andLead Spacing SeeDimension section of this document to verify availability of a specific lead length option. For nonstandard lead length inquiries, please contact KEMET. Packaging C-Spec Ordering Options Table Lead Length Packaging Packaging Type 2,3 (mm) Ordering Code (C-Spec) Reel 25 mm 7301 25 mm +1.5/1.0 (straight leads) 4 Ammo Pack 7317 1 18.0 +2.0/0 (preformed leads ) 3.0 1.0 WL30 3.5 1.0 WL35 4.0 1.0 WL40 Bulk Bag 4.5 1.0 WL45 5.0 1.0 WL50 10.0 1.0 WL10 25.0 1.0 WL25 1 Preformed (crimped) lead configurations includeVertical Kin,Outside Kin andInside Kin. SeeLead Configuration andOrdering Informatio sections of this document for further details. 2 Vertical Kin,Outside Kin andInside Kin lead configurations cannot be combined with the bulk/25 mm lead length option (WL25). 25 mm lead length is only available on capacitors with straight leads (lead configuration ordering code). For nonstandard lead length inquiries, please contact KEMET. 3 For nonstandard lead length inquiries, please contact KEMET. 4 Lead length for ammo pack packaging is defined by the H and H0 dimensions in Table 3. KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1103 KJY 10/22/2021 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com