Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C900, Encapsulated, AH Type, X1 400 VAC/Y1 400 VAC (Industrial Grade) Overview KEMETs 900 series encapsulated radial leaded ceramic capacitor fail, but could result in a risk of fire. The class Y disc capacitors are specifically designed for interference- capacitor is primarily used in line-to-ground (line by-pass) suppression AC line filtering applications. Having applications. In this application, failure of the capacitor could internationally recognized safety certifications, these lead to danger of electric shock. capacitors are well-suited for applications that require keeping potentially disruptive or damaging line transients With a working voltage of 400 VAC in line-to-line (Class X)and and EMI out of susceptible equipment. They are also an 400 VAC in line-to-ground (Class Y) applications, these safety ideal solution when needing to suppress line disturbances capacitors meet the impulse test criteria outlined in IEC at the source. Standard 60384. Meeting subclass X1 and Y1 requirements, these devices are certified to withstand impulses up to 4 Safety Certified Capacitors are classified as either X and/ KV (X1) and 8 KV (Y1) respectively. These encapsulated or Y capacitors. Class X capacitors are primarily used in devices also meet the flame test requirements outlined in UL line-to line (across-the-line) applications. In this application Standard 94 V0. there is no danger of electric shock to humans should the Benefits Safety Standard Recognized (IEC 60384-14) Reliable operation up to 125C Class X1/Y1 10 mm lead spacing Lead (Pb)-free and RoHS Compliant Halogen free Capacitance offerings ranging from 15 4,700 pF Available capacitance tolerances of 5%, 10%, and 20% High reliability Preformed (crimped) or straight lead configurations Non-polar device, minimizing installation concerns 100% pure matte tin-plated lead finish allowing for excellent solderability Encapsulation meets flammability standard UL 94 V0 Applications Typical applications include: Line-to-line (Class X) filtering Line-to-ground (Class Y) filtering Antenna coupling Primary and secondary coupling (switching power supplies) Line disturbances suppression (motors and motor controls, relays, switching power supplies, and inverters) One world. One KEMET KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1068 X1 400 VAC Y1 400 VAC 05/23/19 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comRadial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C900, Encapsulated, AH Type, X1 400 VAC/Y1 400 VAC (Industrial Grade) Ordering Information C9 3 1 U 101 J V S D A A 7317 Ceramic Body Lead Capacitance Capacitance Rated Dielectric/ Failure Packaging 2 Spec. Design Lead Config. 1 Series Diameter Spacing Code (pF) Tolerance Voltage Temp. Char. Rate (C-Spec) C9 = 0 = 7.0 mm 1 = U = Two J = 5% V = X1 S = SL D = A = Straight A = See Ceramic 1 = 8.0 mm 10.0 mm Safety significant K = 10% 400 VAC Y = Y5P Disc B = Vertical N/APackaging 900 2 = 9.0 mm digits and M = 20% /Y1 400 W = Y5U Kink C-Spec Series 3 = 10.0 mm number of VAC V = Y5V C = Outside Ordering 4 = 11.0 mm zeroes Kink Options 5 = 12.0 mm Tabl 6 = 13.0 mm 7 = 14.0 mm 1 Vertical Kin andOutside Kin lead configurations cannot be combined with the bulk/20 mm lead length option (WL20). 20 mm lead length is only available on capacitors ordered with straight leads (lead configuration ordering code). For nonstandard lead length inquiries, please contact KEMET. 2 Bulk packaging lead length availability is dependent uponLead Configuration SeeDimension section of this document to verify availability of a specific lead length option. For nonstandard lead length inquiries, please contact KEMET. Packaging C-Spec Ordering Options Table Lead Length Packaging Packaging Type 2,3 (mm) Ordering Code (C-Spec) Ammo Pack See Note 5 7317 3.01.0 WL30 3.51.0 WL35 4.01.0 WL40 Bulk Bag 4.51.0 WL45 5.01.0 WL50 4 20.0 minimum WL20 1 Preformed (crimped) lead configurations includeVertical Kin andOutside Kink SeeLead Configuration andOrdering Informatio sections of this document for further details. 2 Vertical Kin andOutside Kin lead configurations cannot be combined with the bulk/20 mm lead length option (WL20). 20 mm lead length is only available on capacitors with straight leads (lead configuration ordering code). For nonstandard lead length inquiries, please contact KEMET. 3 For nonstandard lead length inquiries, please contact KEMET. 4 Lead length of 20.0 mm minimum only available for straight leads. 5 Lead length for ammo pack packaging is defined by the H and H dimensions in Table 3. 0 KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1068 X1 400 VAC Y1 400 VAC 05/23/19 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com