Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade) Overview KEMETs 900 encapsulated radial leaded ceramic disc With a working voltage of 440 VAC in line-to-line (Class X) capacitors are specifically designed for interference-sup- and 300 VAC in line-to-ground (Class Y) applications, these pression AC line filtering applications. Having internation- safety capacitors meet the impulse test criteria outlined in ally recognized safety certifications, these capacitors are IEC Standard 60384. Meeting subclass X1 and Y2 require- well-suited for applications that require keeping potentially ments, these devices are certified to withstand impulses up disruptive or damaging line transients and EMI out of sus- to 4 KV (X1) and 5 KV (Y2) respectively. These encapsulated ceptible equipment. They are also an ideal solution when devices also meet the flame test requirements outlined in UL needing to suppress line disturbances at the source. Standard 94V0. Safety Certified Capacitors are classified as either X and/ or Y capacitors. Class X capacitors are primarily used in line-to-line (across-the-line) applications. In this applica- tion, there is no danger of electric shock to humans should the capacitor fail, but could result in a risk of fire. The class Y capacitor is primarily used in line-to-ground (line by-pass) applications. In this application, failure of the capacitor could lead to danger of electric shock. Ordering Information C9 7 1 U 472 M Z W D A A 7317 Ceramic Body Lead Capacitance Capacitance Rated Dielectric/ Lead Failure Packaging Spec. Design 1,2,4 1,3,4 Series Diameter Spacing Code (pF) Tolerance Voltage Temp. Char. Config. Rate (C-Spec) C9 = 0 = 7.0 mm 7 = 7.5 mm U = Two J = 5% Z = X1 S = SL D = A = Straight A = See Ceramic 1 = 8.0 mm 1 = 10.0 Safety significant K = 10% 440 VAC Y = Y5P Disc B = Vertical N/APackaging 900 2 = 9.0 mm mm digits and M = 20% /Y2 300 W = Y5U Kink C-Spec Series 3 = 10.0 mm number of VAC V = Y5V C = Outside Ordering 4 = 11.0 mm zeroes Kink Options 6 = 13.0 mm D = Inside Tabl 8 = 15.0 mm Kink below 1 Due to a high risk of arcing,Inside Kin lead configuration cannot be combined with the 5 mm lead spacing option. TheInside Kin option is only available on capacitors with lead spacing of 7.5 mm or greater. A potential for arcing may exist when combining theInside Kin lead configuration with a 7.5mm lead spacing option, especially in high humidity environments and/or when exposure to voltages and transients may impact creepage and clearance requirements. 2 Capacitor body diameter will limit available lead spacing and packaging options. SeeDimension andProduct Ordering Codes and Rating sections of this document to determine availability. 3 Vertical Kin,Outside Kin andInside Kin lead configurations cannot be combined with the bulk/20 mm lead length option (WL20). 20 mm lead length is only available on capacitors with straight leads (lead configuration ordering code). For nonstandard lead length inquiries, please contact KEMET. 4 Bulk packaging lead length availability is dependent uponLead Configuratio andLead Spacing SeeDimension section of this document to verify availability of a specific lead length option. For nonstandard lead length inquiries, please contact KEMET. One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.com C1065 X1 440 VAC Y2 300 VAC 8/4/2017 1Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, C900, Encapsulated, AC Type, X1 440 VAC/Y2 300 VAC (Industrial Grade) Packaging C-Spec Ordering Options Table Lead Length Packaging Packaging Type 2,3 (mm) Ordering Code (C-Spec) 20.0+1.5/1.0 (straight leads) Ammo Pack 7317 1 18.0+2.0/0 (preformed leads ) 3.01.0 WL30 3.51.0 WL35 4.01.0 WL40 Bulk Bag 4.51.0 WL45 5.01.0 WL50 4 20.0 minimum WL20 1 Preformed (crimped) lead configurations include vertical kink, outside kink and inside kink. SeeLead Configuration andOrdering Informatio sections of this document for further details. 2 Vertical Kin,Outside Kin andInside Kin lead configurations cannot be combined with the bulk/20 mm lead length option (WL20). 20 mm lead length is only available on capacitors with straight leads (lead configuration ordering code). For nonstandard lead length inquiries, please contact KEMET. 3 For nonstandard lead length inquiries, please contact KEMET. 4 Lead length of 20.0 mm minimum only available for straight leads. Benefits Safety standard recognized (IEC 6038414) Reliable operation up to 125C Class X1/Y2 7.5 mm and 10 mm lead spacing Lead (Pb)-free and RoHS Compliant Halogen-free Capacitance offerings ranging from 10 pF up to 10 nF Available capacitance tolerances of 5%, 10% and 20% High reliability Preformed (crimped) or straight lead configurations Non-polar device, minimizing installation concerns Encapsulation meets flammability standard UL 94V0 Applications Typical applications include: Line-to-line (Class X) filtering Line-to-ground (Class Y) filtering Antenna coupling Primary and secondary coupling (switching power supplies) Line disturbances suppression (motors and motor controls, relays, switching power supplies, and inverters) KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.com C1065 X1 440 VAC Y2 300 VAC 8/4/2017 2