CA064C100K5GAC7800 Kemet

Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Capacitor Array, C0G Dielectric, 10 200 VDC (Commercial & Automotive Grade) Overview KEMETs Ceramic Chip Capacitor Array in C0G dielectric is an time and voltage and boasts a negligible change in capacitance advanced passive technology where multiple capacitor elements with reference to ambient temperature. Capacitance change is are integrated into one common monolithic structure. Array limited to 30 ppm/C from -55C to +125C. technology promotes reduced placement costs and increased throughput. This is achieved by alternatively placing one device KEMET automotive grade array capacitors meet the demanding rather than two or four discrete devices. Use of capacitor arrays Automotive Electronics Council s AECQ200 qualification also saves board space which translates into increased board requirements. density and more functions per board. Arrays consume only a portion of the space required for standard chips resulting in savings in inventory and pick/place machine positions. KEMETs C0G dielectric features a 125C maximum operating temperature and is considered stable.The Electronics Industries Alliance (EIA) characterizes C0G dielectric as a Class I material. Components of this classification are temperature compensating and are suited for resonant circuit applications or those where Q and stability of capacitance characteristics are required. C0G exhibits no change in capacitance with respect to Ordering Information 4 K 4 G A C CA 06 C 104 TU Ceramic Case Size Number of Specification/ Capacitance Capacitance Failure Rate/ Termination Packaging/Grade Voltage Dielectric 1 2 3 Array ( x ) Capacitors Series Code (pF) Tolerance Design Finish (C-Spec) 05 = 0508 2 = 2 C = Standard 2 significant J = 5% 8 = 10 V G = C0G A = N/A C = 100% Blank = Bulk Bag 06 = 0612 4 = 4 X = Flexible digits + K = 10% 4 = 16 V Matte Sn (Commercial Grade) Termination number of M = 20% 3 = 25 V L = SnPb (5% TU = 7 Tape & Reel zeros 5 = 50 V minimum) (Commercial Grade) 1 = 100 V AUTO = 7 Reel 2 = 200 V (Automotive Grade) AUTO 7411 = 13 Reel/Punched Paper (Automotive Grade) AUTO 7210 = 13 Reel/ Embossed Plastic (Automotive Grade) 1 All previous reference to metric case dimension1632 has been replaced with an inch standard reference of0612 . Please reference all new designs using the 0612 nomenclature.CA064 replacesC1632 in the ordering code. 2 Additional termination finish options may be available. Contact KEMET for details. 2,3 SnPb termination finish option is not available on automotive grade product. 3 Additional reeling or packaging options may be available. Contact KEMET for details. 3 Reeling tape options (Paper or Plastic) are dependent on capacitor case size (x ) and thickness dimension. SeeChip Thickness/Packaging Quantitie and Tape & Reel Packaging Informatio sections of this document. 3 For additional Information regardingAUT C-Spec options, seeAutomotive C-Spec Informatio section of this document. One world. One KEMET KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com C1016 C0G ARRAY SMD 3/2/2015 1Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Capacitor Array, C0G Dielectric, 10 200 VDC, (Commercial & Automotive Grade) Automotive C-Spec Information KEMET Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AECQ200, Stress Test Qualifi cation for Passive Components. These products are supported by a Product Change Notifi cation (PCN) and Production Part Approval Process warrant (PPAP). Automotive products offered through our distribution channel have been assigned an inclusive ordering code C-Spec,AUT. This C-Spec was developed in order to better serve small and medium sized companies that prefer an automotive grade component without the requirement to submit a customer Source Controlled Drawing (SCD) or specifi cation for review by a KEMET engineering specialist. This C-Spec is therefore not intended for use by KEMETs OEM Automotive customers and are not granted the same privileges as other automotive C-Specs. Customer PCN approval and PPAP request levels are limited (see details below). Product Change Notifi cation (PCN) The KEMET Product Change Notifi cation system is used to communicate primarily the following types of changes: Product/process changes that affect product form, fi t , function, and /or reliability Changes in manufacturing site Product obsolescence Customer Not ification due to: KEMET Automotive Days prior to C-Spec implementation Process/Product change Obsolescence* 1 KEMET assigned Yes (with approval and Yes 180 days Minimum sign off) AUTO Yes (without approval) Yes 90 days Minimum 1 KEMET assigned C-Specs require the submittal of a customer SCD or customer speci fication for review. For additional information contact KEMET. Production Part Approval Process (PPAP) The purpose of the Production Part Approval Process is: To ensure that supplier can meet the manufacturability and quality requirements for the purchased parts. To provide the evidence that all customer engineering design record and spec ification requirements are properly understood and fu lfilled by the manufacturing organization. To demonstrate that the established manufacturing process has the potential to produce the part KEMET PPAP (Product Part Approval Process) Level Automotive 1 2 3 4 5 C-Spec KEMET 1 assigned AUTO 1 KEMET assigned C-Specs require the submittal of a customer SCD or customer speci fication for review. For additional information contact KEMET. Part Number specifi c PPAP available Product family PPAP only KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 (864) 963-6300 www.kemet.com C1016 C0G ARRAY SMD 3/2/2015 22