Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Capacitor Array, X7R Dielectric, 10 200 VDC (Commercial & Automotive Grade) Overview KEMETs Ceramic Chip Capacitor Array in X7R dielectric is KEMETs X7R dielectric features a 125C maximum operating an advanced passive technology where multiple capacitor temperature and is considered temperature stable. elements are integrated into one common monolithic The Electronics Industries Alliance (EIA) characterizes structure. Array technology promotes reduced placement X7R dielectric as a Class II material. Components of this costs and increased throughput. This is achieved by classification are fixed, ceramic dielectric capacitors suited alternatively placing one device rather than two or four for bypass and decoupling applications, or for frequency discrete devices. Use of capacitor arrays also saves board discriminating circuits where Q and stability of capacitance space, which translates into increased board density and characteristics are not critical. X7R exhibits a predictable more functions per board. Arrays consume only a portion change in capacitance with respect to time and voltage and of the space required for standard chips resulting in boasts a minimal change in capacitance with reference to savings in inventory and pick/place machine positions. ambient temperature. Capacitance change is limited to 15% from 55C to +125C. For added reliability, KEMET s Flexible Termination technology has been incorporated in order to provides KEMET automotive grade array capacitors meet the superior flex performance. This technology was developed demanding Automotive Electronics Council s AEC-Q200 to address flex cracks, which are the primary failure mode qualification requirements. of MLCCs and typically the result of excessive tensile and shear stresses produced during board flexure and thermal cycling. Flexible Termination technology inhibits the transfer of board stress to the rigid body of the MLCC, therefore mitigating flex cracks which can result in low IR or short circuit failures. Ordering Information CA 06 4 X 104 K 4 R A C TU Rated Failure Ceramic Case Size Number of Specification/ Capacitance Capacitance Packaging/ 2 Voltage Dielectric Rate/ Termination Finish 1 Array ( x ) Capacitors Series Code (pF) Tolerance Grade (C-Spec) (VDC) Design 06 = 0612 4 = 4 X = Flexible Two J = 5% 8 = 10 R = X7R A = N/A C = 100% Matte Sn See Termination significant K = 10% 4 = 16 L = SnPb Packaging digits and M = 20% 3 = 25 (5% minimum Pb C-Spec number of 5 = 50 content) Ordering zeros 1 = 100 Options Tabl 2 = 200 1 All previous reference to metric case dimension1632 has been replaced with an inch standard reference of0612 . Please reference all new designs using the0612 nomenclature.CA064 replacesC1632 in the ordering code. 2 Additional termination finish options may be available. Contact KEMET for details. 2 SnPb termination finish option is not available on automotive grade product. One world. One KEMET KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1017 X7R ARRAY SMD 9/9/2019 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comSurface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) Capacitor Array, X7R Dielectric, 10 200 VDC (Commercial & Automotive Grade) Packaging C-Spec Ordering Options Table Packaging/Grade Packaging Type Ordering Code (C-Spec) 1 Commercial Grade Bulk Bag Not Required (Blank) 7 Reel/Unmarked TU 13 Reel/Unmarked 7210 2 Automotive Grade 7 Reel AUTO 13 Reel/Unmarked AUTO7210 1 Default packaging isBulk Ba. An ordering code C-Spec is not required forBulk Ba packaging. 1 The termsMarke andUnmarke pertain to laser marking option of capacitors. All packaging options labeled asUnmarke will contain capacitors that have not been laser marked. The option to laser mark is not available on these devices. For more information seeCapacitor Marking 2 Reeling tape options (Paper or Plastic) are dependent on capacitor case size ( x ) and thickness dimension. SeeChip Thickness/Tape & Reel Packaging Quantitie andTape & Reel Packaging Information 2 For additional Information regardingAUT C-Spec options, seeAutomotive C-Spec Information 2 All Automotive packaging C-Specs listed exclude the option to laser mark components. The option to laser mark is not available on these devices. For more information seeCapacitor Marking Benefits 55C to +125C operating temperature range Capacitance offerings ranging from 330 pF 0.10 F Superior flex performance (up to 5 mm) Available capacitance tolerances of 5%, 10%, and 20% Saves both circuit board and inventory space Non-polar device, minimizing installation concerns Reduces placement costs and increases throughput 100% pure matte tin-plated termination finish allowing for Lead (Pb)-free, RoHS and REACH compliant excellent solderability 0612 (4-element) case size SnPb termination finish option available upon request DC voltage ratings of 10 V, 16 V, 25 V, 50 V, 100 V, (5% Pb minimum) and 200 V Commercial and Automotive (AECQ200) grades available Applications Typical applications include those that can benefit from board area savings, cost savings and overall volumetric reduction such as telecommunications, computers, handheld devices and automotive. Flexible termination technology benefits applications subject to high levels of board flexure or temperature cycling. KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1017 X7R ARRAY SMD 9/9/20192 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com