Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) KC-LINK with KONNEKT Technology for High-Efficiency, High-Density Power Applications (Commercial & Automotive Grade) Lead-free Overview KEMET s KC-LINK with KONNEKT technology surface and negligible change in capacitance versus temperature. mount capacitors are designed for high-efficiency and With an operating temperature range up to 150C, these high-density power applications. KONNEKT high density capacitors can be mounted close to fast switching packaging technology uses an innovative Transient Liquid semiconductors in high power density applications, which Phase Sintering (TLPS) material to create a surface require minimal cooling. KC-LINK with KONNEKT technology mount multi-chip solution for high density packaging. By also exhibits high mechanical robustness compared to utilizing KEMET s robust and proprietary C0G base metal other dielectric technologies, allowing the capacitor to be electrode (BME) dielectric system, these capacitors are mounted without the use of metal frames. well suited for power converters, inverters, snubbers, and resonators where high efficiency is a primary concern. These capacitors can also be mounted in a low-loss orientation to further increase power handling capability. KONNEKT technology enables a low-loss, low-inductance The low-loss orientation lowers ESR (Effective Series package capable of handling extremely high ripple Resistance) and ESL (Effective Series Inductance) which currents with no change in capacitance versus DC voltage increases ripple current handling capability. Benefits Applications Extremely high-power density and ripple current Wide bandgap (WBG), silicon carbide (SiC) and gallium capability nitride (GaN) systems Extremely low equivalent series resistance (ESR) Data centers Extremely low equivalent series inductance (ESL) EV/HEV (drive systems, charging) Low-loss orientation option for higher current handling LLC resonant converters capability Switched tank converters Capacitance offerings ranging from 14 880 nF Wireless charging systems DC voltage ratings from 500 2,000 V Photovoltaic systems Operating temperature range of 55C to +150C Power converters No capacitance shift with voltage Inverters No piezoelectric noise DC link High thermal stability Snubber Surface mountable using standard MLCC reflow profiles Standard Low Loss Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1105 KONNEKT KC-Link C0G 8/25/2021 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comSurface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) KC-LINK with KONNEKT Technology for High-Efficiency, High-Density Power Applications (Commercial & Automotive Grade) Ordering Information CKC 33 C 884 K C G L C XXXX Orientation and Case Size Specification/ Capacitance Capacitance Rated Subclass Termination Series Dielectric Packaging (x ) Series Code (pF) Tolerance Voltage (V) Designation Finish (Suffix/C-Spec) CKC = 18 = 1812 C = Two single K = 10% C = 500 V G = L = C = 100% matte Sn See KC-LINK 21 = 2220 Standard digits and W = 650 V C0G KONNEKTPackaging 33 = 3640 number of D = 1,000 V C-Spec zeros. E = 1,200 V Ordering J = 1,700 V Options G = 2,000 V Tabl Additional termination finish options may be available. Contact KEMET for details. Orientation and Packaging (Suffix/C-Spec) Options Table Tape and Reel Packaging/Grade 1 Mounting Orientation Packaging Type Illustration Ordering Code (C-Spec) Commercial Grade 7 Reel/Unmarked TU Standard 13 Reel/Unmarked 7210 7 Reel/Unmarked 7805 Low Loss 13 Reel/Unmarked 7810 Automotive Grade 7 Reel/Unmarked AUTO Standard 13 Reel/Unmarked AUTO7210 7 Reel/Unmarked AUTO7805 Low Loss 13 Reel/Unmarked AUTO7810 1 Orientation refers to the positioning of the KONNEKT capacitors in the Tape and Reel pockets. This allows pick and place machines to place capacitors on the PCB in the correct orientation. KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1105 KONNEKT KC-Link C0G 8/25/2021 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com