ERP610W472MEF0 Kemet

Radial Leaded Ceramic Disc Capacitors Safety Standard Recognized, ERP610 Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade) Overview KEMETs ERP610 encapsulated radial leaded ceramic disc In this application there is no danger of electric shock to capacitors are specifically designed for interference- humans should the capacitor fail, but could result in a risk suppression AC line filtering applications. Having of fire. The class Y capacitor is primarily used in line-to- internationally recognized safety certifications, these ground (line by-pass) applications. In this application, capacitors are well-suited for applications that require failure of the capacitor could lead to danger of electric keeping potentially disruptive or damaging line transients shock. and EMI out of susceptible equipment. They are also an ideal solution when needing to suppress line disturbances With a working voltage of 760 VAC in line-to-line (class at the source. X) and 500 VAC in line-to-ground (class Y) applications, these safety capacitors meet the impulse test criteria Safety certified capacitors are classified as either X and/or outlined in IEC Standard 60384. Meeting subclass X1 and Y capacitors. Class X capacitors are primarily used in line- Y1 requirements, these devices are certified to withstand to-line (across-the-line) applications. impulses up to 4 KV (X1) and 8 KV (Y1) respectively. These encapsulated devices also meet the flame test requirements outlined in UL Standard 94 V0. Benefits Safety Standard Recognized (IEC 60384-14) Reliable operation up to 125C Class X1/Y1 10 mm and 12.5 mm lead spacing RoHS compliant Capacitance offerings ranging from 33 pF up to 4.7 nF Available capacitance tolerances of 10% and 20% High reliability Preformed (crimped) or straight lead configurations Non-polar device, minimizing installation concerns Encapsulation meets flammability standard UL 94 V0 Applications Line-to-Line (Class X) filtering Line-to-Ground (Class Y) filtering Antenna coupling Primary and secondary coupling (switching power supplies) Line disturbances suppression (motors and motor controls, relays, switching power supplies, and invertors) Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1085 ERP610 9/28/2021 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comRadial Leaded Ceramic Disc Capacitors Safety Standard Recognized, ERP610, Encapsulated, X1 760 VAC/Y1 500 VAC (Industrial Grade) Ordering Information ERP610 W 102 M DF0 Ceramic Voltage Rating Capacitance Capacitance Lead configuration/ Series (Safety Subclass Rating) Code (pF) Tolerance Packaging Code ERP610 W = X1 760 VAC/Y1 500 VAC Two significant digits and number K = 10% *See Packaging Options of zeroes M = 20% Packaging C-Spec Ordering Options Tables 1 Bulk Packaging LEAD SPACING F LEAD LENGTH L LEAD DIAMETER D 10 mm 12.5 mm 0.6 mm DF0 EF0 30 mm 3 mm 0.8 mm DJ0 EJ0 Straight leads 0.6 mm DD0 ED0 10 mm 1 mm 0.8 mm DH0 EH0 6 mm 1 mm 0.6 mm/0.8 mm DB0 EB0 0.6 mm EFG Preformed leads inside crimp 30 mm 3 mm 0.8 mm EJG 0.6 mm TE0 TG0 Preformed leads outside crimp 5 mm 1 mm 0.8 mm TF0 TH0 Minimum 2.8 mm 0.6 mm QG0 Preformed leads snap-in Minimum 3.5 mm 0.8 mm QH0 Minimum 2.8 mm + 1.5 mm 0.6 mm YE0 YG0 Inline wire Minimum 3.0 mm + 2.0 mm 0.8 mm YF0 YH0 1 5 mm and 7 mm lead spacing options are not available for ERP610. 1 Reel Packaging Component Pitch 25.4 mm TAPING F Lead spacing F 10 mm 12.5 mm Body diameter D All diameters H = 16.5 mm DRT ERT Straight leads H = 18.0 mm DRU ERU H = 20.0 mm DRY ERY Preformed leads inside crimp H0 = 16.0 mm ERZ Preformed leads outside crimp H0 = 16.0 mm TDR TER Inline wire H0 = 16.0 mm YRD YRE 1 5 mm and 7 mm lead spacing options are not available for ERP610. KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1085 ERP610 9/28/2021 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com