Radial Aluminum Electrolytic Capacitors ESX, +105C Overview Applications The KEMET ESX radial aluminum electrolytic capacitors Typical applications include high frequency switch are designed for long life (up to 5,000 hours) and high mode circuits. frequency applications. Benefits Low impedance Suited for long life, high reliability applications Operating temperature of up to 105C 5,000 hour operating life High ripple current Safety vent on the capacitor base Part Number System ESX 107 M 6R3 A C3 AA Capacitance Rated Voltage Electrical Series Tolerance Size Code Packaging Code (pF) (VDC) Parameters Radial First two digits M = 20% 6R3 = 6.3 035 = 35 A = Standard See Dimension See Ordering Aluminum represent 010 = 10 050 = 50 Table Options Table Electrolytic significant 016 = 16 063 = 63 figures for 025 = 25 080 = 80 capacitance 100 = 100 values. Last digit specifies the number of zeros to be added. Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard A4073 ESX 11/17/2020 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comRadial Aluminum Electrolytic Capacitors ESX, +105C Ordering Options Table Lead Length Lead and Diameter Length Packaging Type Lead Type (mm) Packaging Code Standard Bulk Packaging Options All Bulk (bag) Straight 20/15 Minimum AA 4 22 Tape & Reel All Tape & Reel Formed to 2.5 mm H = 16 0.75 LA 4 5 0 4 8 All Tape & Reel 2.5 mm lead spacing H = 18.5 0.75 KA 0 All Tape & Reel Formed to 5 mm H = 16 0.75 JA 4 8 0 20 Tape & Reel Straight H = 18.5 0.75 KA 10 0 Ammo Pack All Ammo Formed to 5 mm H = 16 0.75 DA 4 8 0 4 8 All Ammo Straight H = 18.5 0.75 EA 0 All Ammo Formed to 2.5 mm H = 16 0.75 FA 4 5 0 All Ammo 5 mm lead spacing H = 18.5 0.75 EA 10 13 0 All Ammo 7.5 mm lead spacing H = 18.5 0.75 EA 16 0 18 25 Ammo 7.5 mm lead spacing H = 18.5 0.75 EA 0 Contact KEMET for other lead and packaging options Environmental Compliance As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental effects of both our capacitors and their production. In Europe (RoHS Directive) and in some other geographical areas like China, legislation has been put in place to prevent the use of some hazardous materials, such as lead (Pb), in electronic equipment. All products in this catalog are produced to help our customers obligations to guarantee their products and fulfill these legislative requirements. The only material of concern in our products has been lead (Pb), which has been removed from all designs to fulfill the requirement of containing less than 0.1% of lead in any homogeneous material. KEMET will closely follow any changes in legislation world wide and make any necessary changes in its products, whenever needed. Some customer segments such as medical, military and automotive electronics may still require the use of lead in electrode coatings. To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for RoHS compatible capacitors. Due to customer requirements, there may appear additional markings such as lead free (LF) or lead-free wires (LFW) on the label. KEMET Electronics Corporation KEMET Tower One East Broward Boulevard A4073 ESX 11/17/2020 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com