Radial Aluminum Electrolytic Capacitors ETA, +105C Overview Applications The KEMET ETA radial aluminum electrolytic capacitors are Typical applications include SMPS, power supplies, designed for long life (4,000 10,000 hours), high reliability, adaptors, chargers, monitors, and computers. and low impedance applications. Benefits Long life, up to 10,000 hours Low impedance Operating temperature of up to 105C Safety vent on the capacitor base Part Number System ETA 157 M 6R3 A C3 AA Capacitance Rated Voltage Electrical Series Tolerance Size Code Packaging Code (pF) (VDC) Parameters Radial First two digits M = 20% 6R3 = 6.3 A = Standard See Dimension See Ordering Aluminum represent 010 = 10 Table Options Table Electrolytic significant figures 016 = 16 for capacitance 025 = 25 values. Last digit 035 = 35 specifies the number of zeros to be added. Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard A4061 ETA 11/17/2020 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comRadial Aluminum Electrolytic Capacitors ETA, +105C Ordering Options Table Lead Length Lead and Diameter Length Packaging Type Lead Type (mm) Packaging Code Standard Bulk Packaging Options All Bulk (bag) Straight 20/15 Minimum AA 4 22 Tape & Reel All Tape & Reel Formed to 2.5 mm H = 16 0.75 LA 4 5 0 4 8 All Tape & Reel 2.5 mm lead spacing H = 18.5 0.75 KA 0 All Tape & Reel Formed to 5 mm H = 16 0.75 JA 4 8 0 20 Tape & Reel Straight H = 18.5 0.75 KA 10 0 Ammo Pack All Ammo Formed to 5 mm H = 16 0.75 DA 4 8 0 4 8 All Ammo Straight H = 18.5 0.75 EA 0 All Ammo Formed to 2.5 mm H = 16 0.75 FA 4 5 0 All Ammo 5 mm lead spacing H = 18.5 0.75 EA 10 13 0 All Ammo 7.5 mm lead spacing H = 18.5 0.75 EA 16 0 18 25 Ammo 7.5 mm lead spacing H = 18.5 0.75 EA 0 Contact KEMET for other lead and packaging options Environmental Compliance As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental effects of both our capacitors and their production. In Europe (RoHS Directive) and in some other geographical areas like China, legislation has been put in place to prevent the use of some hazardous materials, such as lead (Pb), in electronic equipment. All products in this catalog are produced to help our customers obligations to guarantee their products and fulfill these legislative requirements. The only material of concern in our products has been lead (Pb), which has been removed from all designs to fulfill the requirement of containing less than 0.1% of lead in any homogeneous material. KEMET will closely follow any changes in legislation world wide and make any necessary changes in its products, whenever needed. Some customer segments such as medical, military and automotive electronics may still require the use of lead in electrode coatings. To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for RoHS compatible capacitors. Due to customer requirements, there may appear additional markings such as lead free (LF) or lead-free wires (LFW) on the label. KEMET Electronics Corporation KEMET Tower One East Broward Boulevard A4061 ETA 11/17/2020 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com