pHE426
RoHS
Compliant
single metallized film pulse capacitor, polypropylene dielectric
according to iEc 60384-16, grade 1.1
L B
tYpiCaL appLiCations ConstRuCtion
H
Pulse operation in SMPS, TV, monitor, Polypropylene film capacitor with vacuum
0.5
electrical ballast and other high frequency evaporated aluminum electrodes. Radial
applications demanding stable operation. leads of tinned wire are electrically welded
p
d
l
to the contact metal layer on the ends of
b
the capacitor winding. Encapsulation in
self-extinguishing material meeting the
requirements of UL 94V-0.
Two different winding constructions are
p d std I max I b
used, depending on voltage and lead
-1
spacing. They are specified in the article
5.0 0.4 0.5 5 20 0.4
-1
table.
7.5 0.4 0.6 5 20 0.4
-1
10.0 0.4 0.6 5 30 0.4
-1
15.0 0.4 0.8 6 30 0.4
-1
22.5 0.4 0.8 6 30 0.4
1 section construction 2 section construction -1
27.5 0.4 0.8 6 30 0.4
-1
37.5 0.5 1.0 6 30 0.7
tECHniCaL data
rated voltage u , vdc 100 250 300 400 450 630 1000 1600 2000
r
rated voltage u , vac 63 160 160 220 220 250 250 650 700
r
capacitance range, f 0.001 0.001 0.033 0.001 0.1 0.001 0.0027 0.0047 0.001
0.22 27 18 10 3.9 5.6 3.3 0.047 0.027
capacitance values In accordance with IEC E12 series
capacitance tolerance 5%, other tolerances on request
category temperature range 55 ... +105C
rated temperature +85C
voltage derating The rated voltage is decreased with 1.3%/C between +85C and +105C.
climatic category IEC 60068-1, 55/105/56/B
Passive flammability Category B according to IEC 60065
maximum pulse steepness: dU/dt according to article table
For peak to peak voltages lower than rated voltage (U < U ), the specified dU/dt can be
PP R
multiplied by the factor U /U
R PP.
t emperature coefficient 200 (+50, 100) ppm/C (at 1 kHz)
self-inductance Approximately 6 nH/cm for the total length of capacitor winding and the leads.
dissipation factor tan Maximum values at +23C
C 0.1 F 0.1F < C 1.0 F C > 1.0 F
1 kHz 0.05% 0.05% 0.10%
10 kHz 0.10%
100 kHz 0.25%
Measured at +23C, 100 VDC 60 s for U < 500 VDC and at 500 VDC for U 500 VDC
insulation resistance R R
Between terminals:
C 0.33 F: 100 000 M
C > 0.33 F: 30 000 s
Between terminals and case:
100 000 M.0.22 F
0.012 F
0.022 F
1 F
0.33 F
0.82 F
0.68 F
PhE426
dERating oF u Vs FREquEnCY , +85C amBiEnt tEmpERatuRE
Rms
and 10C intERnaL HEating, tYpiCaL V aLuEs
U (V)
U (V) 250 VDC/160VAC U (V) rms 400 VDC/450 VDC/220 VAC
rms rms 300 VDC/160 VAC
100 100
100
0.1 F
0.056 F
10 10 2.2 F
10
1 1
0.1 1.0 10 100
0.1 1.0 10 100 0.1 1.0 10 100
Frequency (kHz)
Frequency (kHz)
Frequency (kHz)
U (V) U (V) 1000 VDC/250 VAC
rms 630 VDC/250 VAC rms U (V) 1600 VDC/650 VAC
rms
1000
100
100
0.0047F
0.022F
0.047F
10
1
0.1 1.0 10.0 100.0 1000.0
10
0.1 1.0 10 100
Frequency (kHz)
Frequency (kHz) Frequency (kHz)
U (V)
2000 VDC/700 VAC
rms
1000
more simulation possibilities
in Pccad software package.
0.001F
100
see page 94.
0.0047F
0.022F
10
1
0.1 1.0 10.0 100.0 1000.0
Frequency (kHz)
EnViRonmEntaL tEst data maRKing
RIFA
According to IEC 60384-16, Grade 1.1 and Quality tests and requirements for Pulse
Article code
Capacitors on page 95.
Rated capacitance according to
IEC 60062
Capacitance tolerance code
oRdERing inFoRmation
Rated voltage
Manufacturing code (year, month)
The article code for the standard part is given in the article table.
For other options, see page 11.
Evox Rifa Leaded Film Capacitors
4.7 F
0.068 F
0.1 F
2.2 F
4.7 F
0.27 F
2.5 F
0.039 F