Surface Mount and Through-Hole Multilayer Ceramic Capacitors KPS-MCC High Temperature 200C SMPS Stacks 50 2,000 VDC (Industrial Grade) Overview KEMET Power Solutions - Military Case Code (KPS-MCC) and thermal stress performance, while the parallel circuit High Temperature SMPS Ceramic Stacked Capacitors configuration allows for bulk capacitance in the same or combine a robust and proprietary C0G/NPO base metal smaller design footprint. electrode (BME) dielectric system with a durable lead- frame technology for high temperature and high power KEMETs high temperature C0G capacitors are temperature- SMPS applications. These devices are specifically compensating and are well suited for resonant circuit designed to withstand the demands of harsh industrial applications, or for those where Q and stability of environments such as down-hole oil exploration and capacitance characteristics are required. They exhibit no automotive/avionics engine compartment circuitry. change in capacitance with respect to time and voltage, and boast a negligible change in capacitance with reference to The KPS-MCC is constructed with large chip multilayer ambient temperature. Capacitance change is limited to 30 ceramic capacitors (MLCCs), horizontally stacked and ppm/C from 55C to +200C. In addition, these capacitors secured to a lead-frame termination system, using a high exhibit high insulation resistance with low dissipation factor melting point (HMP) solder alloy. The lead-frame isolates at elevated temperatures up to +200C. They also exhibit the MLCCs from the printed circuit board (PCB), while low ESR at high frequencies and offer greater volumetric establishing a parallel circuit configuration. Mechanically efficiency over competitive high temperature BME ceramic isolating the capacitors from the PCB improves mechanical capacitor devices. Benefits Straight Pin lead wires forthrough-hol mounting Formed and lead wires for surface mounting O p e r a ti n g te m p e r a t u r e r a n g e of 5 5 to +2 0 0C Military-style case codes (MCC) 3, 4, and 5 DC voltage ratings of 50 2,000 V Capacitance offerings ranging from 4.7 nF 2.0 F Industrial grade High frequency performance and bulk capacitance in a reduced footprint Low ESR and ESL High thermal stability High ripple current capability One world. One KEMET KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1094 KPS-MCC 200C STACKS 4/13/2020 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comSurface Mount and Through-Hole Multilayer Ceramic Capacitors KPS-MCC High Temperature 200C SMPS Stacks, 50 2,000 VDC (Industrial Grade) Applications SMPS Industrial I n p u t a n d o u tp u t fi l te r i n g o n p owe r su p p lies , Down-hole often found on capacitor banks Defense and aerospace Snubber circuits and DC link Hybrid and Electric Vehicles (HEVs, BEVs) Resonator circuits Ordering Information L1 G N 30 C 106 K A 02 Dielectric Case Size/ Rated Lead/ Lead Capacitance Capacitance Number Product Family Clas s i fi c a ti o n / Case Code Voltage Termination 1 C on fi g u r a ti on Code (pF) Tolerance of Chips Characteristic (CC) (DC) Finish L1 G = N = Straight pin 30 = CC3 5 = 50 V Two J = 5% A = Silver 01 - 10 2 0 0 C C 0 G L = Formed 40 = CC4 1 = 100 V S ig n i fi c an t K = 10% H = Solder (BME) J = Formed 50 = CC5 2 = 200 V Digits and Coated (60/40) C = 500 V number of B = 630 V zeros D = 1,000 V F = 1,500 V G = 2,000 V 1 Lead configuration and dimension details are outlined in theDimension section of this document. Additional lead configurations may be available. Contact KEMET for details. Lead Configurations Inches (Millimeters) Lead Style L Lead Style Symbol Lead Length 0.250 minimum N (N) Straight (6.35) 0.055 0.005 L (L) Formed (1.4 0.127) 0.055 0.005 J (J) Formed (1.4 0.127) Additional lead configurations may be available. Contact KEMET for details. KEMET Electronics Corporation KEMET Tower One East Broward Boulevard C1094 KPS-MCC 200C STACKS 4/13/2020 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com