Surface Mount Metallized PPS Film Capacitor LDB, Unencapsulated Stacked Chip, Size 1206 1812, 16 VDC and 50 VDC Overview Applications Polyphenylene sulphide (PPS) film capacitor for surface Typical applications include timing, filtering, and use as mounting. a memory capacitor. The LDB Series is designed for high stability, accuracy, and temperature. Benefits Rated voltage: 16 50 VDC Capacitance range: 0.0033 0.1F EIA Size 1206 1812 Capacitance tolerance: 2%, 5% Climatic category: 55/125/56 RoHS compliance and lead-free terminations Operating temperature range of 55C to +125C Part Number System LDB A A 2120 G C 5 N 0 Rated Voltage Capacitance Capacitance Series Size Code Dielectric Version Packaging Internal Use (VDC) Code (pF) Tolerance Metallized PPS A = 16 See Dimension Digits two G = 2% C = PPS 5 = Standard See Ordering 0 (Standard) C = 50 Table four indicate J = 5% Options Table the first three digits of the capacitance value. First digit indicates the number of zeros to be added. Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard F3082 LDB 9/14/2021 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comSurface Mount Metallized PPS Film Capacitors LDB, Unencapsulated Stacked Chip, Size 1206 1812, 16 VDC and 50 VDC Dimensions Millimeters T L B Chip Size H Size Code (EIA) (Maximum) Nominal Tolerance Nominal Tolerance Nominal Tolerance A 1206 1.7 0.2 3.3 +0.3/0.1 0.4 +0.5/0.3 B 1210 2.5 0.3 See Part Number Table 3.3 +0.3/0.1 0.4 +0.5/0.3 C 1812 3.3 0.3 4.7 +0.3/0.2 0.4 +0.5/0.3 Landing Areas and Solder Paste Suggestions A B C D Dimensions in mm Dimensions in mm Size Size A B C D A B C D 1206 1.5 1.1 2.3 4.5 2824 5.7 2.3 5.3 9.9 1210 2.3 1.1 2.3 4.5 4030 7.4 2.6 8.2 13.4 1812 3.0 1.7 3.1 6.5 5040 9.6 2.6 10.7 15.9 2220 4.6 2.1 3.9 8.1 6054 12.6 2.6 13.2 18.4 These landing area dimensions have the aim of taking full advantage of the new RoHS 6 terminations design. We suggest to use a Sn/Ag/Cu solder paste (suggested thickness: 0.10 0.15 mm). If a NOT Lead Free solder paste is used, a minimum peak temperature of 210C on the components body is suggested. KEMET Electronics Corporation KEMET Tower One East Broward Boulevard F3082 LDB 9/14/2021 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com