Axial Aluminum Electrolytic Capacitors PEG130, 105C Overview Applications KEMET s PEG130 is an electrolytic capacitor with an KEMET s PEG130 is a new generation of high performance outstanding electrical performance. This product is axial electrolytic capacitors, designed for applications with constructed in a polarized, all-welded design, with tinned very long service life requirements. The capacitors are copper wire leads and a negative pole connected to the especially suitable for LED/lamp power supplies, automotive case of the capacitor. The PEG130 winding is housed in a and low voltage power electronic applications. cylindrical aluminum can with a high purity aluminium lid and a high quality rubber gasket. The low ESR is a result of a low resistive electrolyte/paper system and an all-welded design. Benefits Next-generation high performance axial series Very long operational life (up to 160,000 hours at 80C) Minimal heat generation Low ESR electrolyte/paper system Available with capacitances as high as 6,300 F and voltage options of 25, 40, and 63 VDC Polarized all-welded design Outstanding electrical performance Part Number System PEG130 H H 436 0 Q L1 Capacitance Code Capacitance Series Rated Voltage (VDC) Size Code Version Packaging (F) Tolerance Axial Aluminum H = 25 See Dimension The last two 0 = Standard Q = 10/+30% See Ordering Electrolytic K = 40 Table digits represent Options Table M = 63 significant figures. The first digit indicates the total number digits. Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard A4045 PEG130 6/21/2021 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comAxial Aluminum Electrolytic Capacitors PEG130, 105C Performance Characteristics Item Performance Characteristics Capacitance Range 900 6,300 F Rated Voltage 25 63 VDC Operating Temperature 40 to +105C Capacitance Tolerance 10/+30% at 100 Hz/+20C Op e r a t i o n a l Li f e t i m e 45,000 hours at +105C (hours, D = 20 mm) Shelf Life 5,000 hours at +105C or 10 years at +40C 0 VDC I = 0.003 CV + 4.0 (A) Leakage Current C = rated capacitance (F), V = rated voltage (VDC). Voltage applied for 5 minutes at +20C. Procedure Requirements 0.75 mm displacement amplitude or 10 g maximum No leakage of electrolyte or other visible Vibration Test Specifications acceleration. Vibration applied for three 2-hour damage. Deviations in capacitance from initial sessions at 10 2,000 Hz (capacitor clamped by body). measurements must not exceed: C/C < 5% Standards IEC 603844 long life grade 40/125/56 Compensation Factor of Ripple Current (RC) vs. Frequency Frequency 100 Hz 300 Hz 1 kHz 5 kHz 100 kHz Coefficient 0.35 0.57 0.80 1.00 1.04 Test Method & Performance Endurance Life Test Conditions Performance Temperature +105C Test Duration 12,000 hours Ripple Current Maximum ripple current specified in table Voltage The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor Performance The following specifications will be satisfied when the capacitor is tested at +20C: Capacitance Change Within 15% of the initial value Equivalent Series Resistance Does not exceed 200% of the initial value Leakage Current Does not exceed leakage current limit KEMET Electronics Corporation KEMET Tower One East Broward Boulevard A4045 PEG130 6/21/2021 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com