Screw Terminal Aluminum Electrolytic Capacitors
PEH200 Series, +85C
Overview Applications
KEMET's PEH200 Series of capacitors has a polarized Typical applications for KEMET's PEH200 capacitor include
all-welded design, heavy duty screw terminals, extended uninterruptible power supplies (UPS), ground power units
cathode construction, safety vent, and plastic insulation. (GPU), welding equipment, and drives where high current
The sealing system is designed for electrolyte leakage-free ratings and compact size are important.
operation and a very low gas-diffusion rate of electrolyte.
Mechanical contact between the winding and aluminum
case allows excellent heat transfer from the winding hot-
spot to the ambient, which means cooler operation and
very high current ratings.
Benefits
High CV value
, I applied)
Long life, up to 29,000 hours at +85C (V
R R
Low ESR and ESL
Compact size
Optimized designs available upon request
Part Number System
PEH200 H A 515 0 M U2
Capacitance Code Capacitance
Series Rated Voltage (VDC) Size Code Version Stud Option
(F) Tolerance
Screw Terminal H = 25 X = 385 See Dimension The last two 0 = Standard M = 20% U2 = Plain Can
Aluminum K = 40 V = 400 table digits represent B2 = Threaded
Electrolytic M = 63 O = 420 significant mounting stud
P = 100 Y = 450 figures. The
S = 250 Z = 500 first digit
U = 350 specifies the
total number of
digits.
One world. One KEMET
KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.com A4034_PEH200 2/7/2017 1Screw Terminal Aluminum Electrolytic Capacitors PEH200 Series, +85C
Performance Characteristics
Item Performance Characteristics
Capacitance Range 100 330,000 F
Rated Voltage 25 500 VDC
Operating Temperature 40 to +85C
Capacitance Tolerance 20% at 100 Hz/+20C
Rated Voltage and Ripple Current at
D (mm) Rated Voltage at +85C (hours)
+85C (hours)
35 10,000
50 12,000
Operational Lifetime
65 15,000
75 19,000
90 29,000 60,000
Shelf Life 2,000 hours at +85C or 4 years at +40C 0 VDC
I = 0.003 CV + 4000 (A) (V < 500 VDC)
R
Leakage Current
C = rated capacitance (F), V = rated voltage (VDC). Voltage applied for 5 minutes at +20C.
Procedure Requirements
0.75 mm displacement amplitude or
10 g maximum acceleration.
D 50 mm Vibration applied for three 2-hour
No leakage of electrolyte or
sessions at 10 500 Hz
other visible damage. Deviations
Vibration Test Specifications
(Capacitor clamped by body).
in capacitance from initial
0.75 mm displacement amplitude or
measurements must not exceed:
10 g maximum acceleration.
C/C < 5%
D > 50 mm Vibration applied for three 2-hour
sessions at 10 55 Hz
(Capacitor clamped by body).
IEC 603844 long life grade 40/85/56
Standards
Test Method & Performance
Endurance Life Test
Conditions Performance
Temperature +85C
Test Duration 2,000 hours
Ripple Current Maximum ripple current specified in table
Voltage The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor
Performance The following specifications will be satisfied when the capacitor is tested at +20C:
100 V Within 15% of the initial value
Capacitance Change
> 100 V Within 10% of the initial value
Equivalent Series Resistance Does not exceed 200% of the initial value
Leakage Current Does not exceed leakage current limit
KEMET Electronics Corporation P.O. Box 5928 Greenville, SC 29606 864-963-6300 www.kemet.com A4034_PEH200 2/7/2017 2