Snap-In Aluminum Electrolytic Capacitors PEH532, +105C Overview Applications KEMET s PEH532 is a long-life electrolytic capacitor Typical applications for KEMET s PEH532 capacitor include designed to offer high ripple current capability and low switch mode power supplies (SMPS), drives, welding mounting cost. Low ESR is the result of a very low resistive equipment, uninterruptible power supplies (UPS), and other paper/electrolyte system. Low ESR, together with the TDC power electronic applications where high current ratings thermal concept, gives the PEH532 a high ripple current and compact size are important. capability. Benefits Snap-In , I applied) 1,500 hours at +105C (V R R PCB mounting Low ESR and ESL High ripple current Part Number System PEH532 J AC 433 0 M 2 Capacitance Code Capacitance Series Rated Voltage (VDC) Size Code Version Termination (F) Tolerance Snap-In type J = 35 See Dimension The last two 0 = Standard M = 20% See Termination Aluminum M = 63 Table digits represent Table Electrolytic P = 100 significant figures. R = 200 The first digit S = 250 indicates the total U = 350 number digits. V = 400 Y = 450 Built Into Tomorrow KEMET Electronics Corporation KEMET Tower One East Broward Boulevard A4023 PEH532 2/17/2021 1 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.comSnap-In Aluminum Electrolytic Capacitors PEH532, +105C Performance Characteristics Item Performance Characteristics Capacitance Range 68 27,000 F Rated Voltage 35 450 VDC Operating Temperature 40 to +105C Capacitance Tolerance 20% at 100 Hz/+20C Rated Voltage and Ripple Current at D (mm) Rated Voltage at +105C (hours) +105C (hours) Operational Lifetime 22 35 1,500 2,000 Shelf Life 4 years at +40C 0 VDC I = 0.003 CV (A) Leakage Current C = rated capacitance (F), V = rated voltage (VDC). Voltage applied for 5 minutes at +20C. Procedure Requirements 0.75 mm displacement amplitude or 10 g maximum acceleration. Vibration Test Specifications No leakage of electrolyte or other visible damage. Deviations in Vibration applied for three 2-hour capacitance from initial measurements must not exceed: C/C < 5% sessions at 10 500 Hz (Capacitor clamped by body). Standards IEC 60384-4 long life grade 40/105/56, in accordance with CECC 30 301809 Test Method & Performance Endurance Life Test Conditions Performance Temperature +105C Test Duration 2,000 hours Ripple Current Maximum ripple current specified in table Voltage The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor Performance The following specifications will be satisfied when the capacitor is tested at +20C: 160 V Within 15% of the initial value Capacitance Change > 160 V Within 10% of the initial value Equivalent Series Resistance Does not exceed 200% of the initial value Leakage Current Does not exceed leakage current limit KEMET Electronics Corporation KEMET Tower One East Broward Boulevard A4023 PEH532 2/17/2021 2 Fort Lauderdale, FL 33301 USA 954-766-2800 www.kemet.com