PHE426MK5330JR035B Kemet

pHE426 RoHS Compliant single metallized film pulse capacitor, polypropylene dielectric according to iEc 60384-16, grade 1.1 L B tYpiCaL appLiCations ConstRuCtion H Pulse operation in SMPS, TV, monitor, Polypropylene film capacitor with vacuum 0.5 electrical ballast and other high frequency evaporated aluminum electrodes. Radial applications demanding stable operation. leads of tinned wire are electrically welded p d l to the contact metal layer on the ends of b the capacitor winding. Encapsulation in self-extinguishing material meeting the requirements of UL 94V-0. Two different winding constructions are p d std I max I b used, depending on voltage and lead -1 spacing. They are specified in the article 5.0 0.4 0.5 5 20 0.4 -1 table. 7.5 0.4 0.6 5 20 0.4 -1 10.0 0.4 0.6 5 30 0.4 -1 15.0 0.4 0.8 6 30 0.4 -1 22.5 0.4 0.8 6 30 0.4 1 section construction 2 section construction -1 27.5 0.4 0.8 6 30 0.4 -1 37.5 0.5 1.0 6 30 0.7 tECHniCaL data rated voltage u , vdc 100 250 300 400 450 630 1000 1600 2000 r rated voltage u , vac 63 160 160 220 220 250 250 650 700 r capacitance range, f 0.001 0.001 0.033 0.001 0.1 0.001 0.0027 0.0047 0.001 0.22 27 18 10 3.9 5.6 3.3 0.047 0.027 capacitance values In accordance with IEC E12 series capacitance tolerance 5%, other tolerances on request category temperature range 55 ... +105C rated temperature +85C voltage derating The rated voltage is decreased with 1.3%/C between +85C and +105C. climatic category IEC 60068-1, 55/105/56/B Passive flammability Category B according to IEC 60065 maximum pulse steepness: dU/dt according to article table For peak to peak voltages lower than rated voltage (U < U ), the specified dU/dt can be PP R multiplied by the factor U /U R PP. t emperature coefficient 200 (+50, 100) ppm/C (at 1 kHz) self-inductance Approximately 6 nH/cm for the total length of capacitor winding and the leads. dissipation factor tan Maximum values at +23C C 0.1 F 0.1F < C 1.0 F C > 1.0 F 1 kHz 0.05% 0.05% 0.10% 10 kHz 0.10% 100 kHz 0.25% Measured at +23C, 100 VDC 60 s for U < 500 VDC and at 500 VDC for U 500 VDC insulation resistance R R Between terminals: C 0.33 F: 100 000 M C > 0.33 F: 30 000 s Between terminals and case: 100 000 M.0.22 F 0.012 F 0.022 F 1 F 0.33 F 0.82 F 0.68 F PhE426 dERating oF u Vs FREquEnCY , +85C amBiEnt tEmpERatuRE Rms and 10C intERnaL HEating, tYpiCaL V aLuEs U (V) U (V) 250 VDC/160VAC U (V) rms 400 VDC/450 VDC/220 VAC rms rms 300 VDC/160 VAC 100 100 100 0.1 F 0.056 F 10 10 2.2 F 10 1 1 0.1 1.0 10 100 0.1 1.0 10 100 0.1 1.0 10 100 Frequency (kHz) Frequency (kHz) Frequency (kHz) U (V) U (V) 1000 VDC/250 VAC rms 630 VDC/250 VAC rms U (V) 1600 VDC/650 VAC rms 1000 100 100 0.0047F 0.022F 0.047F 10 1 0.1 1.0 10.0 100.0 1000.0 10 0.1 1.0 10 100 Frequency (kHz) Frequency (kHz) Frequency (kHz) U (V) 2000 VDC/700 VAC rms 1000 more simulation possibilities in Pccad software package. 0.001F 100 see page 94. 0.0047F 0.022F 10 1 0.1 1.0 10.0 100.0 1000.0 Frequency (kHz) EnViRonmEntaL tEst data maRKing RIFA According to IEC 60384-16, Grade 1.1 and Quality tests and requirements for Pulse Article code Capacitors on page 95. Rated capacitance according to IEC 60062 Capacitance tolerance code oRdERing inFoRmation Rated voltage Manufacturing code (year, month) The article code for the standard part is given in the article table. For other options, see page 11. Evox Rifa Leaded Film Capacitors 4.7 F 0.068 F 0.1 F 2.2 F 4.7 F 0.27 F 2.5 F 0.039 F